Related references
Note: Only part of the references are listed.Ultimate behaviour of high-yielding low-hardening aluminium alloy I-beams
Rosario Montuori et al.
THIN-WALLED STRUCTURES (2020)
Web crippling of aluminium alloy channel sections with flanges restrained
Feng Zhou et al.
THIN-WALLED STRUCTURES (2020)
Flexural capacity of perforated aluminium CHS tubes-An experimental study
Ran Feng et al.
STRUCTURES (2020)
Behaviour of aluminium alloy plain and lipped channel columns
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2019)
Ultimate resistance and rotation capacity of low yielding high hardening aluminium alloy beams under non-uniform bending
Vincenzo Piluso et al.
THIN-WALLED STRUCTURES (2019)
Stability analysis of an aluminum alloy assembly column in a modular support structure
Lin He et al.
THIN-WALLED STRUCTURES (2019)
Material properties of normal and high strength aluminium alloys at elevated temperatures
Mei-Ni Su et al.
THIN-WALLED STRUCTURES (2019)
Numerical study and design of aluminium alloy channel section columns with welds
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2019)
Application of structural topology optimisation in aluminium cross-sectional design
Konstantinos Daniel Tsavdaridis et al.
THIN-WALLED STRUCTURES (2019)
Analytical behavior of concrete-filled aluminum tubular stub columns under axial compression
Fa-Cheng Wang et al.
THIN-WALLED STRUCTURES (2019)
Experimental study of aluminium lipped channel sections subjected to web crippling under two flange load cases
Husam Alsanat et al.
THIN-WALLED STRUCTURES (2019)
Numerical investigation and design of perforated aluminium alloy SHS and RHS columns
Ran Feng et al.
ENGINEERING STRUCTURES (2019)
Mechanical properties and residual stresses in cold-rolled aluminium channel sections
Le Anh Thi Huynh et al.
ENGINEERING STRUCTURES (2019)
Flexural behavior of double- and single-layer aluminum alloy gusset-type joints
Hongbo Liu et al.
THIN-WALLED STRUCTURES (2019)
Finite-element analysis and design of aluminium alloy CHSs with circular through-holes in bending
Ran Feng et al.
THIN-WALLED STRUCTURES (2019)
Web crippling behaviour and design of aluminium lipped channel sections under two flange loading conditions
Husam Alsanat et al.
THIN-WALLED STRUCTURES (2019)
Investigation of aluminium bolted joint (HBJ) system behavior
Guy Oyeniran Adeoti et al.
THIN-WALLED STRUCTURES (2019)
Member moment capacity of complex-shaped aluminium mullions under wind suction loading
Sivakumar Kesawan et al.
THIN-WALLED STRUCTURES (2019)
Constitutive model of structural aluminum alloy under cyclic loading
Xiaonong Guo et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Flexural behavior of concrete-filled aluminum alloy circular hollow section tubes
Yu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Tests and parametric analysis of aluminum alloy bolted joints of different material types
Z. X. Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Bearing capacity of aluminum alloy members under eccentric compression at elevated temperatures
Shaojun Zhu et al.
THIN-WALLED STRUCTURES (2018)
Experimental study on hysteretic behavior of aluminum alloy gusset joints
Xiaonong Guo et al.
THIN-WALLED STRUCTURES (2018)
Numerical Slenderness Approach for design of complex aluminum extrusions subjected to flexural loading
Yongwook Kim et al.
THIN-WALLED STRUCTURES (2018)
Experimental investigation on bending and shear performance of two-way aluminum alloy gusset joints
Mingzhe Shi et al.
THIN-WALLED STRUCTURES (2018)
Design of CFRP-strengthened aluminium alloy tubular sections subjected to web crippling
S. M. Zahurul Islam et al.
THIN-WALLED STRUCTURES (2018)
Buckling behaviour of aluminium alloy columns under fire conditions
Shouchao Jiang et al.
THIN-WALLED STRUCTURES (2018)
Study on out-of-plane flexural behavior of aluminum alloy gusset joints at elevated temperatures
Xiaonong Guo et al.
THIN-WALLED STRUCTURES (2018)
Design of aluminium alloy stocky hollow sections subjected to concentrated transverse loads
Mei-Ni Su et al.
THIN-WALLED STRUCTURES (2018)
Tests of perforated aluminium alloy SHSs and RHSs under axial compression
Ran Feng et al.
THIN-WALLED STRUCTURES (2018)
Experimental investigation and parametric analysis on overall buckling behavior of large-section aluminum alloy columns under axial compression
Z. X. Wang et al.
THIN-WALLED STRUCTURES (2018)
Section moment capacity tests of complex-shaped aluminium mullions
Sivakumar Kesawan et al.
THIN-WALLED STRUCTURES (2018)
Concrete-filled double-skin aluminum circular hollow section stub columns
Feng Zhou et al.
THIN-WALLED STRUCTURES (2018)
Flexural behaviour of concrete-filled aluminium alloy thin-walled SHS and RHS tubes
Ran Feng et al.
ENGINEERING STRUCTURES (2017)
Plastic collapse of hardening spatial aluminium frames: A novel shakedown-based approach
A. T. Ampatzis et al.
ENGINEERING STRUCTURES (2017)
Classification of aluminium alloy cross-sections
Mei-Ni Su et al.
ENGINEERING STRUCTURES (2017)
Ultimate behaviour of RHS temper T6 aluminium alloy beams subjected to non-uniform bending: Parametric analysis
Paolo Castaldo et al.
THIN-WALLED STRUCTURES (2017)
Compressive buckling strength of extruded aluminium alloy I-section columns with fixed-pinned end conditions
Y. Q. Wang et al.
THIN-WALLED STRUCTURES (2017)
Flexural behaviour of CFRP strengthened concrete-filled aluminium alloy CHS tubes
Yu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The continuous strength method for the design of aluminium alloy structural elements
Mei-Ni Su et al.
ENGINEERING STRUCTURES (2016)
Flexural response of aluminium alloy SHS and RHS with internal stiffeners
Mei-Ni Su et al.
ENGINEERING STRUCTURES (2016)
Perforated metal shear panels as bracing devices of seismic-resistant structures
A. Formisano et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)
Local buckling of aluminium and steel plates with multiple holes
Irene C. Scheperboer et al.
THIN-WALLED STRUCTURES (2016)
Interacted buckling failure of thin-nailed irregular-shaped aluminum alloy column under axial compression
Yicun Chang et al.
THIN-WALLED STRUCTURES (2016)
Experimental study and parametric analysis on the stability behavior of 7A04 high-strength aluminum alloy angle columns under axial compression
Y. Q. Wang et al.
THIN-WALLED STRUCTURES (2016)
Buckling behaviors of thin-walled aluminum alloy column with irregular-shaped cross section under axial compression in a fire
Mei Liu et al.
THIN-WALLED STRUCTURES (2016)
Experimental investigation on the post-fire mechanical properties of structural aluminum alloys 6061-T6 and 7075-T73
Zhihua Chen et al.
THIN-WALLED STRUCTURES (2016)
Tests of aluminium alloy CHS columns with circular openings
Ran Feng et al.
THIN-WALLED STRUCTURES (2016)
Estimation of ultimate strength in single shear bolted connections with aluminum alloys (6061-T6)
YongHyun Cho et al.
THIN-WALLED STRUCTURES (2016)
Test and design method for the buckling behaviors of 6082-T6 aluminum alloy columns with box-type and L-type sections under eccentric compression
Yuanzheng Zhao et al.
THIN-WALLED STRUCTURES (2016)
Experimental study and finite element analysis on the local buckling behavior of aluminium alloy beams under concentrated loads
Y. Q. Wang et al.
THIN-WALLED STRUCTURES (2016)
Application of the Component Method to Aluminum Alloy Gusset Joints
Xiaonong Guo et al.
ADVANCES IN STRUCTURAL ENGINEERING (2015)
Buckling behaviors of section aluminum alloy columns under axial compression
Mei Liu et al.
ENGINEERING STRUCTURES (2015)
Strength of an Aluminum Column Web in Tension
Giuseppe Brando et al.
JOURNAL OF STRUCTURAL ENGINEERING (2015)
Experimental Investigation of Aluminum Alloy Stub Columns with Circular Openings
Ran Feng et al.
JOURNAL OF STRUCTURAL ENGINEERING (2015)
Experimental investigation on local buckling behaviors of stiffened closed-section thin-walled aluminum alloy columns under compression
Mei Liu et al.
THIN-WALLED STRUCTURES (2015)
Stability of 6082-T6 aluminium alloy columns with H-section and rectangular hollow sections
Guy Oyeniran Adeoti et al.
THIN-WALLED STRUCTURES (2015)
Local buckling and postbuckling strength of extruded aluminium alloy stub columns with slender I-sections
H. X. Yuan et al.
THIN-WALLED STRUCTURES (2015)
Aluminum tubular sections subjected to web crippling
Yu Chen et al.
THIN-WALLED STRUCTURES (2015)
Experimental investigation on the stability of aluminium alloy 6082 circular tubes in axial compression
Yujin Wang et al.
THIN-WALLED STRUCTURES (2015)
Practical strain-hardening material properties for use in deformation-based structural steel design
A. S. J. Foster et al.
THIN-WALLED STRUCTURES (2015)
Experimental investigation on the semi-rigid behaviour of aluminium alloy gusset joints
Xiaonong Guo et al.
THIN-WALLED STRUCTURES (2015)
Strength of an Aluminum Column Web in Tension
Giuseppe Brando et al.
JOURNAL OF STRUCTURAL ENGINEERING (2015)
Experimental Investigation of Aluminum Alloy Stub Columns with Circular Openings
Ran Feng et al.
JOURNAL OF STRUCTURAL ENGINEERING (2015)
Deformation-based design of aluminium alloy beams
Mei-Ni Su et al.
ENGINEERING STRUCTURES (2014)
Testing and Design of Aluminum Alloy Cross Sections in Compression
Mei-Ni Su et al.
JOURNAL OF STRUCTURAL ENGINEERING (2014)
Experimental Analysis of Stability of Aluminium Beams in Case of Fire
O. R. (Ronald) van der Meulen et al.
JOURNAL OF STRUCTURAL FIRE ENGINEERING (2014)
Global Restraint in Ultra-Lightweight Buckling-Restrained Braces
Peter Dusicka et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)
Pure aluminium: An innovative material for structural applications in seismic engineering
Gianfranco De Matteis et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Effective length of aluminium T-stub connections by parametric analysis
Gianfranco De Matteis et al.
ENGINEERING STRUCTURES (2012)
Web crippling of aluminium tubular structural members strengthened by CFRP
S. M. Zahurul Islam et al.
THIN-WALLED STRUCTURES (2012)
Lateral-torsional buckling resistance of aluminium I-beams
Y. Q. Wang et al.
THIN-WALLED STRUCTURES (2012)
Numerical analysis and design of concrete-filled aluminum circular hollow section columns
Feng Zhou et al.
THIN-WALLED STRUCTURES (2012)
Block Shear Strength of Single Shear Four-Bolted Connections with Aluminum Alloys -Experiment and Design Strength Comparison
TaeSoo Kim
ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3 (2012)
Hysteretic behaviour of bracing-type pure aluminium shear panels by experimental tests
Gianfranco De Matteis et al.
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2011)
Design formulations for non-welded and welded aluminium columns using Continuous Strength Method
Mahmud Ashraf et al.
ENGINEERING STRUCTURES (2011)
Local Buckling of Aluminum Alloy Angles under Uniform Compression
Federico M. Mazzolani et al.
JOURNAL OF STRUCTURAL ENGINEERING (2011)
Structural Analysis of Compression Deformation and Failure of Aluminum in Fire
S. Feih et al.
JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2011)
Direct Strength Method for Design of Cold-Formed Steel Columns with Holes
C. D. Moen et al.
JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2011)
FRP strengthened aluminium tubular sections subjected to web crippling
S. M. Zahurul Islam et al.
THIN-WALLED STRUCTURES (2011)
Design rules for web crippling of CFRP strengthened aluminium rectangular hollow sections
C. Wu et al.
THIN-WALLED STRUCTURES (2011)
Web crippling of aluminium tubes with perforated webs
Feng Zhou et al.
ENGINEERING STRUCTURES (2010)
Local Buckling of Fire-Exposed Aluminum Members: New Design Model
J. Maljaars et al.
JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2010)
Creep-based life prediction modelling of aluminium in fire
E. Kandare et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Larson-Miller Failure Modeling of Aluminum in Fire
E. Kandare et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Ultimate flexural strength of aluminum sections
Y. Kim et al.
THIN-WALLED STRUCTURES (2010)
Behaviour of welded aluminium T-stub joints under monotonic loading
G. De Matteis et al.
COMPUTERS & STRUCTURES (2009)
Flexural buckling of fire exposed aluminium columns
J. Maljaars et al.
FIRE SAFETY JOURNAL (2009)
Modeling of Residual Stresses in Structural Stainless Steel Sections
L. Gardner et al.
JOURNAL OF STRUCTURAL ENGINEERING (2009)
Design of Aluminum Alloy Flexural Members Using Direct Strength Method
Ji-Hua Zhu et al.
JOURNAL OF STRUCTURAL ENGINEERING (2009)
Local buckling of aluminium structures exposed to fire. Part 1: Tests
J. Maljaars et al.
THIN-WALLED STRUCTURES (2009)
Local buckling of aluminium structures exposed to fire Part 2: Finite element models
J. Maljaars et al.
THIN-WALLED STRUCTURES (2009)
Concrete-filled aluminum circular hollow section column tests
Feng Zhou et al.
THIN-WALLED STRUCTURES (2009)
Constitutive model for aluminum alloys exposed to fire conditions
J. Maljaars et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Aluminum tubular sections subjected to web crippling - Part I: Tests and finite element analysis
Feng Zhou et al.
THIN-WALLED STRUCTURES (2008)
Numerical investigation and design of aluminum alloy circular hollow section columns
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2008)
Prediction of residual stresses and strains in cold-formed steel members
Cristopher D. Moen et al.
THIN-WALLED STRUCTURES (2008)
Tests of concrete-filled aluminum stub columns
Feng Zhou et al.
THIN-WALLED STRUCTURES (2008)
Effect of strain hardening on the buckling of structural members and design codes recommendations
A. I. Manevich
THIN-WALLED STRUCTURES (2007)
Pure aluminium shear panels as dissipative devices in moment-resisting steel frames
G. De Matteis et al.
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2007)
Effects of transverse welds on aluminum alloy columns
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2007)
Finite element modelling of welded aluminium members subjected to four-point bending
T. Wang et al.
THIN-WALLED STRUCTURES (2007)
Experimental investigation of aluminum alloy thin-walled tubular members in combined compression and bending
Ji-Hua Zhu et al.
JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2006)
Analysis of lateral stability of I-section aluminum beams
Cheng Ming et al.
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2006)
Aluminum alloy tubular columns - Part I: Finite element modeling and test verification
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2006)
Aluminum alloy tubular columns - Part II: Parametric study and design using direct strength method
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2006)
Tests and design of aluminum alloy compression members
Ji-Hua Zhu et al.
JOURNAL OF STRUCTURAL ENGINEERING (2006)
Structural design for non-linear metallic materials
L Gardner et al.
ENGINEERING STRUCTURES (2006)
Aluminum alloy circular hollow section beam-columns
Ji-Hua Zhu et al.
THIN-WALLED STRUCTURES (2006)
Experimental investigation of aluminum alloy circular hollow section columns
JH Zhu et al.
ENGINEERING STRUCTURES (2006)
Meeting challenges in welding of aluminum alloys through pulse gas metal arc welding
P Praveen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
T-stub aluminium joints: influence of behavioural parameters
G De Matteis et al.
COMPUTERS & STRUCTURES (2000)
Local buckling of aluminum members: Testing and classification
C Faella et al.
JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2000)
Welded aluminium alloy connections: test results and BS8118
TK Chan et al.
THIN-WALLED STRUCTURES (2000)
Share Paper
