Related references
Note: Only part of the references are listed.Storage systems for building-integrated photovoltaic (BIPV) and building-integrated photovoltaic/thermal (BIPVT) installations: Environmental profile and other aspects
Chr. Lamnatou et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
On the Implementation of the Nearly Zero Energy Building Concept for Jointly Acting Renewables Self-Consumers in Mediterranean Climate Conditions
Faidra Kotarela et al.
ENERGIES (2020)
Flexural behavior investigation of steel-GFRP hybrid-reinforced concrete beams based on experimental and numerical methods
Gu Xingyu et al.
ENGINEERING STRUCTURES (2020)
Thermal performance of semitransparent CdTe BIPV window at temperate climate
Hameed Alrashidi et al.
SOLAR ENERGY (2020)
Performance analysis of solar assisted heat pump coupled with build-in PCM heat storage based on PV/T panel
Jian Yao et al.
SOLAR ENERGY (2020)
Effect of strain on the dark current-voltage characteristic of silicon heterojunction solar cells
L. Guin et al.
SOLAR ENERGY (2020)
Annual analysis of a multi-functional BIPV/T solar wall system in typical cities of China
Lijie Xu et al.
ENERGY (2020)
An evaluation of feed-in tariffs for promoting household solar energy adoption in Southeast Queensland, Australia
Haifeng Lan et al.
SUSTAINABLE CITIES AND SOCIETY (2020)
A Hybrid vs. On-Grid Photovoltaic System: Multicriteria Analysis of Environmental, Economic, and Technical Aspects in Life Cycle Perspective
Agnieszka Zelazna et al.
ENERGIES (2020)
Global Techno-Economic Performance of Bifacial and Tracking Photovoltaic Systems
Carlos D. Rodriguez-Gallegos et al.
JOULE (2020)
Solar cell efficiency tables (version 56)
Martin A. Green et al.
PROGRESS IN PHOTOVOLTAICS (2020)
Climate response of a BiPV facade system enhanced with latent PCM-based thermal energy storage
Jakub Curpek et al.
RENEWABLE ENERGY (2020)
BIPV/T facades - A new opportunity for integrated collector-storage solar water heaters? Part 2: Physical realisation and laboratory testing
Adrian Pugsley et al.
SOLAR ENERGY (2020)
Improving performance of solar roof tiles by incorporating phase change material
Mohammad A. Alim et al.
SOLAR ENERGY (2020)
Aerodynamic Performance of an Adaptive GFRP Wind Barrier Structure for Railway Bridges
Yiqing Dai et al.
MATERIALS (2020)
Lifecycle cost analysis (LCCA) of tailor-made building integrated photovoltaics (BIPV) facade: Solsmaragden case study in Norway
Hassan Gholami et al.
SOLAR ENERGY (2020)
Optimization assessment of the energy performance of a BIPV/T-PCM system using Genetic Algorithms
Ricardo Pereira et al.
RENEWABLE ENERGY (2019)
Investigating the potential for energy flexibility in an office building with a vertical BIPV and a PV roof system
Daniel Aelenei et al.
RENEWABLE ENERGY (2019)
Enhancement of the performance of Photovoltaic/Trombe wall system using the porous medium: Experimental and theoretical study
Omer K. Ahmed et al.
ENERGY (2019)
Continuous performance assessment of thin-film flexible photovoltaic cells under mechanical loading for building integration
Yiqing Dai et al.
SOLAR ENERGY (2019)
Solar energy system for heating and domestic hot water supply by means of a heat pump coupled to a photovoltaic ventilated facade
K. Martin-Escudero et al.
SOLAR ENERGY (2019)
Techno-economic performance analysis of the smart solar photovoltaic blinds considering the photovoltaic panel type and the solar tracking method
Hyuna Kang et al.
ENERGY AND BUILDINGS (2019)
Dynamic photovoltaic building envelopes for adaptive energy and comfort management
Bratislav Svetozarevic et al.
NATURE ENERGY (2019)
Color Comfort Evaluation of Dye-Sensitized Solar Cell (DSSC) Based Building-Integrated Photovoltaic (BIPV) Glazing after 2 Years of Ambient Exposure
Anurag Roy et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
Stress mitigation for adhesively bonded photovoltaics with fibre reinforced polymer composites in load carrying applications
Yiqing Dai et al.
COMPOSITES PART B-ENGINEERING (2019)
A comparison of building energy codes and policies in the USA, Germany, and China: progress toward the net-zero building goal in three countries
Ming Hu et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2019)
Photovoltaic System Integrated Into the Noise Barrier - Energy Performance and Life Cycle Assessment
Agata Zdyb et al.
JOURNAL OF ECOLOGICAL ENGINEERING (2019)
Photovoltaic performances of mono- and mixed-halide structures for perovskite solar cell: A review
C. H. Ng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Technical and economic evaluation of thin-film CdTe building-integrated photovoltaics (BIPV) replacing fa ade and rooftop materials in office buildings in a warm and sunny climate
M. J. Sorgato et al.
RENEWABLE ENERGY (2018)
Enhanced support vector regression based forecast engine to predict solar power output
Chuanfu Shang et al.
RENEWABLE ENERGY (2018)
Strain effect on the performance of amorphous silicon and perovskite solar cells
An Chen et al.
SOLAR ENERGY (2018)
Integrated thinking for photovoltaics in buildings
Christophe Ballif et al.
NATURE ENERGY (2018)
Integration of dye solar cells in load- bearing translucent glass fiber- reinforced polymer laminates
Carlos Pascual et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Recent advancement in BIPV product technologies: A review
Akash Kumar Shukla et al.
ENERGY AND BUILDINGS (2017)
A review of thin film solar cell technologies and challenges
Taesoo D. Lee et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Yearly energy performance of a photovoltaic-phase change material (PV-PCM) system in hot climate
A. Hasan et al.
SOLAR ENERGY (2017)
Experimental and numerical studies to assess the energy performance of naturally ventilated PV facade systems
Mehdi Shahrestani et al.
SOLAR ENERGY (2017)
Transparent alumina based superhydrophobic self-cleaning coatings for solar cell cover glass applications
S. Sutha et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Analysis of feed-in tariff policies for solar photovoltaic in China 2011-2016
Liang-Cheng Ye et al.
APPLIED ENERGY (2017)
Comparative study on the annual performance of three types of building integrated photovoltaic (BIPV) Trombe wall system
Zhongting Hu et al.
APPLIED ENERGY (2017)
Membranes with embedded photovoltaic flexible cells: Structural and electrical performances under uniaxial and biaxial stresses
R. Scotta et al.
COMPOSITE STRUCTURES (2016)
An exergoeconomic-based parametric study to examine the effects of active and passive energy retrofit strategies for buildings
Ivan Garcia Kerdan et al.
ENERGY AND BUILDINGS (2016)
Optimizing thermal performance of building-integrated photovoltaics for upgrading informal urbanization
M. S. ElSayed
ENERGY AND BUILDINGS (2016)
A comprehensive review on design of building integrated photovoltaic system
Akash Kumar Shukla et al.
ENERGY AND BUILDINGS (2016)
Optimal feed-in tariff for solar photovoltaic power generation in China: A real options analysis
M. M. Zhang et al.
ENERGY POLICY (2016)
A critical review on building integrated photovoltaic products and their applications
M. Tripathy et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
The role of phase change materials for the sustainable energy
Marta Kuta et al.
1ST INTERNATIONAL CONFERENCE ON THE SUSTAINABLE ENERGY AND ENVIRONMENT DEVELOPMENT (SEED 2016) (2016)
Mechanical degradation and stability of organic solar cells: molecular and microstructural determinants
Suchol Savagatrup et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Experimental investigation of a low cost passive strategy to improve the performance of Building Integrated Photovoltaic systems
Laura Maturi et al.
SOLAR ENERGY (2015)
Increased photovoltaic performance through temperature regulation by phase change materials: Materials comparison in different climates
A. Hasan et al.
SOLAR ENERGY (2015)
Simulation study of a naturally ventilated building integrated photovoltaic (BIPV) envelope
Syamimi Saadon et al.
6TH INTERNATIONAL BUILDING PHYSICS CONFERENCE (IBPC 2015) (2015)
Performance evaluation of PV-Trombe wall for sustainable building development
Kashif Irshad et al.
12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS (2015)
Experimental study of cooling BIPV modules by forced convection in the air channel
A. S. Kaiser et al.
APPLIED ENERGY (2014)
Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) system
Adnan Ibrahim et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Total light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Carlos Pascual et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
A low-cost non-toxic post-growth activation step for CdTe solar cells
J. D. Major et al.
NATURE (2014)
Application of a phase-change material to improve the electrical performance of vertical-building-added photovoltaics considering the annual weather conditions
Jungwoo Park et al.
SOLAR ENERGY (2014)
Flexible photovoltaic technologies
Qingfeng Lin et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Compulsive policy-making-The evolution of the German feed-in tariff system for solar photovoltaic power
Joern Hoppmann et al.
RESEARCH POLICY (2014)
Thermal performance of a hybrid BIPV-PCM: modeling, design and experimental investigation
Laura Aelenei et al.
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY (SHC 2013) (2014)
Monitoring the performance of single and triple junction amorphous silicon modules in two building integrated photovoltaic (BIPV) installations
Rustu Eke et al.
APPLIED ENERGY (2013)
An approach for energy modeling of a building integrated photovoltaic (BIPV) Trombe wall system
Basak Kundakci Koyunbaba et al.
ENERGY AND BUILDINGS (2013)
The solar photovoltaic feed-in tariff scheme in New South Wales, Australia
Nigel Martin et al.
ENERGY POLICY (2013)
Effect of dust accumulation on the power outputs of solar photovoltaic modules
Muhammed J. Adinoyi et al.
RENEWABLE ENERGY (2013)
Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings
H. M. Yin et al.
SOLAR ENERGY (2013)
An insight into real-time performance assessment of a building integrated photovoltaic (BIPV) installation in Bangalore (India)
Gayathri Aaditya et al.
ENERGY FOR SUSTAINABLE DEVELOPMENT (2013)
Recent Developments of Flexible CdTe Solar Cells on Metallic Substrates: Issues and Prospects
M. M. Aliyu et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2012)
Building integrated photovoltaic products: A state-of-the-art review and future research opportunities
Bjorn Petter Jelle et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Ultrathin and lightweight organic solar cells with high flexibility
Martin Kaltenbrunner et al.
NATURE COMMUNICATIONS (2012)
Optical performance of vertical axis three azimuth angles tracked solar panels
Yi Ma et al.
APPLIED ENERGY (2011)
Performance of PV-Trombe wall in winter correlated with south facade design
Wei Sun et al.
APPLIED ENERGY (2011)
Building-integrated photovoltaics (BIPV) in architectural design in China
Changhai Peng et al.
ENERGY AND BUILDINGS (2011)
Photovoltaic DC-Building-Module-Based BIPV System-Concept and Design Considerations
Bangyin Liu et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2011)
Self regulation of photovoltaic module temperature in V-trough using a metal-wax composite phase change matrix
Subarna Maiti et al.
SOLAR ENERGY (2011)
Enhancing the performance of building integrated photovoltaics
Brian Norton et al.
SOLAR ENERGY (2011)
The effect of using two PCMs on the thermal regulation performance of BIPV systems
Ming Jun Huang
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Environmental payback time analysis of a roof-mounted building-integrated photovoltaic (BIPV) system in Hong Kong
L. Lu et al.
APPLIED ENERGY (2010)
Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics
A. Hasan et al.
SOLAR ENERGY (2010)
Annual performance of building-integrated photovoltaic/water-heating system for warm climate application
T. T. Chow et al.
APPLIED ENERGY (2009)
Ultra-light asymmetric photovoltaic sandwich structures
Julien Rion et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Effect of air gap on the performance of building-integrated photovoltaics
Guohui Gan
ENERGY (2009)
Predicting solar radiation at high resolutions: A comparison of time series forecasts
Gordon Reikard
SOLAR ENERGY (2009)
On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations
E. Skoplaki et al.
SOLAR ENERGY (2009)
Experimental natural convection on vertical surfaces for building integrated photovoltaic (BIPV) applications
M. Fossa et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2008)
Performance improvement of PV/T solar collectors with natural air flow operation
J. K. Tonui et al.
SOLAR ENERGY (2008)
Study of PV-Trombe wall installed in a fenestrated room with heat storage
Ji Jie et al.
APPLIED THERMAL ENGINEERING (2007)
Modeling of a novel Trombe wall with PV cells
Ji Jie et al.
BUILDING AND ENVIRONMENT (2007)
Design procedure for cooling ducts to minimise efficiency loss due to temperature rise in PV arrays
BJ Brinkworth et al.
SOLAR ENERGY (2006)
The yield of different combined PV-thermal collector designs
HA Zondag et al.
SOLAR ENERGY (2003)