Related references
Note: Only part of the references are listed.Effects of Loading Spectra on High pH Crack Growth Behavior of X65 Pipeline Steel
Hamid Niazi et al.
CORROSION (2020)
On the formation of stress corrosion crack colonies with different crack population
Shidong Wang et al.
CORROSION SCIENCE (2020)
Stress corrosion cracking behavior of rusted X100 steel under the combined action of Cl- and HSO3- in a wet-dry cycle environment
Ke Gong et al.
CORROSION SCIENCE (2020)
Pits formation and stress corrosion cracking behavior of Q345R in hydrofluoric acid
Hailong Dai et al.
CORROSION SCIENCE (2020)
Near-neutral pH corrosion of mill-scaled X-65 pipeline steel with paint primer
Shidong Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Influence of inclusions on initiation of pitting corrosion and stress corrosion cracking of X70 steel in near-neutral pH environment
Liwei Wang et al.
CORROSION SCIENCE (2019)
Cracking failure analysis of an engine exhaust manifold at high temperatures based on critical fracture toughness and FE simulation approach
Mohammad Amin Salehnejad et al.
ENGINEERING FRACTURE MECHANICS (2019)
Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface
Binhan Sun et al.
ACTA MATERIALIA (2019)
Stress corrosion of pipeline steel under disbonded coating in a SRB-containing environment
Tangqing Wu et al.
CORROSION SCIENCE (2019)
Effect of static mechanical load on intergranular stress-corrosion cracking of 7050-T7451 C-Ring specimens
Zhipeng Zhao et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2019)
Dislocation evolution at a crack-tip in a hexagonal close packed metal under plane-stress conditions
Zhouyao Wang et al.
ACTA MATERIALIA (2019)
Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water
Litao Chang et al.
ACTA MATERIALIA (2019)
A review of iron carbonate (FeCO3) formation in the oil and gas industry
Richard Barker et al.
CORROSION SCIENCE (2018)
On the theoretical modeling of fatigue crack growth
Zahra S. Hosseini et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Strain aging behaviour of Cu-containing microalloyed low carbon seamless pipeline steel
Q. Wu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Finite element analysis of hydrogen diffusion/plasticity coupled behaviors of low-alloy ferritic steel at large strain
T. C. Cui et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Crack Growth Modeling and Life Prediction of Pipeline Steels Exposed to Near-Neutral pH Environments: Dissolution Crack Growth and Occurrence of Crack Dormancy in Stage I
Jiaxi Zhao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
True stress-strain curves for ASTM A992 steel for fracture simulation at elevated temperatures
Wenyu Cai et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)
The role of reversed austenite in hydrogen embrittlement fracture of S41500 martensitic stainless steel
Y. H. Fan et al.
ACTA MATERIALIA (2017)
Modelling the electrochemical crack size effect on stress corrosion crack growth rate
A. Turnbull et al.
CORROSION SCIENCE (2017)
Chemical and electrochemical conditions within stress corrosion and corrosion fatigue cracks
Leslie G. Bland et al.
NPJ MATERIALS DEGRADATION (2017)
A review of modelling high pH stress corrosion cracking of high pressure gas pipelines
J. Griggs et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2016)
Strain gradient plasticity-based modeling of hydrogen environment assisted cracking
Emilio Martinez-Paneda et al.
ACTA MATERIALIA (2016)
An Overview of Near-Neutral pH Stress Corrosion Cracking in Pipelines and Mitigation Strategies for Its Initiation and Growth
Weixing Chen
CORROSION (2016)
The Slow Strain Rate Stress Corrosion Cracking Test-A 50 Year Retrospective
M. Henthorne
CORROSION (2016)
An Overview of Near-Neutral pH Stress Corrosion Cracking in Pipelines and Mitigation Strategies for Its Initiation and Growth
Weixing Chen
CORROSION (2016)
The Slow Strain Rate Stress Corrosion Cracking Test-A 50 Year Retrospective
M. Henthorne
CORROSION (2016)
Stress corrosion cracking of gas pipeline steels of different strength
O. I. Zvirko et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Research of Strain Aging in Pipeline Steel with a Ferrite/Martensite Dual-Phase Microstructure
Xiurong Zuo et al.
STEEL RESEARCH INTERNATIONAL (2015)
Hardness recovery mechanism in the heat-affected zone during long-term natural aging and its influence on the mechanical properties and fracture behavior of friction stir welded 2024Al-T351 joints
Z. Zhang et al.
ACTA MATERIALIA (2014)
Low Temperature Creep Behaviour of Pipeline Steels
W. Chen et al.
CANADIAN METALLURGICAL QUARTERLY (2014)
Investigating the mechanism of stress corrosion cracking in near-neutral and high pH environments for API 5L X52 steel
M. Javidi et al.
CORROSION SCIENCE (2014)
Further study on crack growth model of buried pipelines exposed to concentrated carbonate-bicarbonate solution
B. T. Lu
ENGINEERING FRACTURE MECHANICS (2014)
Correlation between Continuous/Discontinuous Yielding and Hall-Petch Slope in High Purity Iron
Si Gao et al.
MATERIALS TRANSACTIONS (2014)
A quantitative prediction model of SCC rate for nuclear structure materials in high temperature water based on crack tip creep strain rate
F. Q. Yang et al.
NUCLEAR ENGINEERING AND DESIGN (2014)
X-ray microtomography observation of subsurface stress corrosion crack interactions in a pipeline low carbon steel
Erwin Gamboa et al.
SCRIPTA MATERIALIA (2014)
Cyclic plastic deformation response at fatigue crack tips
Surajit Kumar Paul et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)
Strain Aging of X100 Steel in Service and the Enhanced Susceptibility of Pipelines to Stress Corrosion Cracking
Guangchuan Liang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Static strain aging behavior of an X100 pipeline steel
Wengui Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Simulation of crack growth during hydrostatic testing of pipeline steel in near-neutral pH environment
Yongwang Kang et al.
CORROSION SCIENCE (2011)
Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO•OH) by instrumented indentation and molecular dynamics analysis
D. Chicot et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Crack growth model for pipelines exposed to concentrated carbonate-bicarbonate solution with high pH
B. T. Lu et al.
CORROSION SCIENCE (2010)
Transgranular crack growth in the pipeline steels exposed to near-neutral pH soil aqueous solutions: The role of hydrogen
W. Chen et al.
ACTA MATERIALIA (2009)
Multi-scale characterization of stress corrosion cracking of cold-worked stainless steels and the influence of Cr content
S. Lozano-Perez et al.
ACTA MATERIALIA (2009)
Local additional potential model for effect of strain rate on SCC of pipeline steel in an acidic soil solution
Z. Y. Liu et al.
CORROSION SCIENCE (2009)
Effect of cathodic protection on corrosion of pipeline steel under disbonded coating
X. Chen et al.
CORROSION SCIENCE (2009)
Mechanical behavior and crack tip plasticity of a strain aging sensitive steel
J. Belotteau et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
A critical crevice solution and IR drop crevice corrosion model
Glyn F. Kennell et al.
CORROSION SCIENCE (2008)
Mechanical properties of CO2 corrosion product scales and their relationship to corrosion rates
Kewei Gao et al.
CORROSION SCIENCE (2008)
Corrosion of the stressed pipe steel in carbonate-bicarbonate solution studied by scanning localized electrochemical impedance spectroscopy
M. C. Li et al.
ELECTROCHIMICA ACTA (2008)
The role of residual stress in neutral pH stress corrosion cracking of pipeline steels - Part II: Crack dormancy
W. Chen et al.
ACTA MATERIALIA (2007)
The role of residual stress in neutral pH stress corrosion cracking of pipeline steels. Part 1: Pitting and cracking occurrence
G. Van Boven et al.
ACTA MATERIALIA (2007)
An in situ Raman-electrochemical investigation of carbon steel corrosion in Na2CO3/NaHCO3, Na2SO4, and NaCl solutions
CT Lee et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Surface enthalpy of goethite
L Mazeina et al.
CLAYS AND CLAY MINERALS (2005)
Finite-element analysis of fatigue crack closure under plane strain conditions: stabilization behaviour and mesh size effect
HJ Lee et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
Structural characterization of corrosion products on archaeological iron: an integrated analytical approach to establish corrosion forms
D Neff et al.
JOURNAL OF RAMAN SPECTROSCOPY (2004)
SCC initiation for X65 pipeline steel in the high pH carbonate/bicarbonate solution
JQ Wang et al.
CORROSION SCIENCE (2003)
Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects
K Solanki et al.
ENGINEERING FRACTURE MECHANICS (2003)
Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography
W Ludwig et al.
ACTA MATERIALIA (2003)
Portevin-LeChatelier effect in strain and stress controlled tensile tests
FB Klose et al.
COMPUTATIONAL MATERIALS SCIENCE (2003)
Environment-assisted cracking of corrosion-resistant alloys in oil and gas production environments: A review
PR Rhodes
CORROSION (2001)
Statistical theory as applied to cyclic hardening
PO Kettunen
ACTA MATERIALIA (2000)
Share Paper
