Related references
Note: Only part of the references are listed.Interlaminar toughening of unidirectional CFRP with multilayers graphene and MWCNTs for Mode II fracture
Bin Liu et al.
COMPOSITE STRUCTURES (2020)
Enhancement of interlaminar fracture toughness in textile-reinforced epoxy composites with polyamide 6/graphene oxide interlaminar toughening tackifier
Xiaoran Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Direct growth of thermally reduced graphene oxide on carbon fiber for enhanced mechanical strength
Beom-Gon Cho et al.
COMPOSITES PART B-ENGINEERING (2020)
Enhancing the fracture toughness of hierarchical composites through amino-functionalised carbon nanotube webs
Andres Nistal et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical behavior of Graphene decorated carbon fiber reinforced polymer composites: An assessment of the influence of functional groups
Pavan Kumar Gangineni et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Experimental investigation on graphene oxides coated carbon fibre/epoxy hybrid composites: Mechanical and electrical properties
Lokasani Bhanuprakash et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils
Yunfu Ou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Reinforcing carbon fiber epoxy composites with triazine derivatives functionalized graphene oxide modified sizing agent
Lichun Ma et al.
COMPOSITES PART B-ENGINEERING (2019)
Flexible, quickly responsive and highly efficient E-heating carbon nanotube film
Mohamed Amine Aouraghe et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture
Liu Bin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Laser-Induced Graphene: From Discovery to Translation
Ruquan Ye et al.
ADVANCED MATERIALS (2019)
Enhanced fracture toughness of hierarchical carbon nanotube reinforced carbon fibre epoxy composites with engineered matrix microstructure
M. Shukur Zainol Abidin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Flexural strength enhancement in carbon-fiber epoxy composites through graphene nano-platelets coating on fibers
Alok K. Srivastava et al.
COMPOSITES PART B-ENGINEERING (2019)
Laser-Induced Graphene Composites as Multifunctional Surfaces
Duy Xuan Luong et al.
ACS NANO (2019)
Influence of matrix ductility and toughness on strain energy release rate and failure behavior of woven-ply reinforced thermoplastic structures at high temperature
B. Vieille et al.
COMPOSITES PART B-ENGINEERING (2018)
Effects of hydrazine reduced graphene oxide on the inter-laminar fracture toughness of woven carbon fiber/epoxy composite
Nitai Chandra Adak et al.
COMPOSITES PART B-ENGINEERING (2018)
Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix
Somen K. Bhudolia et al.
COMPOSITES PART B-ENGINEERING (2018)
Graphene oxide incorporated functional materials: A review
Hassan Ahmad et al.
COMPOSITES PART B-ENGINEERING (2018)
Improving the delamination resistance of carbon fiber/epoxy composites by brushing and abrading of the woven fabrics
Feng Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of the Hybrid Combination of Multiwalled Carbon Nanotubes and Graphene Oxide on Interlaminar Mechanical Properties of Carbon Fiber/Epoxy Laminates
J. A. Rodriguez-Gonzalez et al.
APPLIED COMPOSITE MATERIALS (2018)
Modification of Epoxy Resin Using Graphene
K. A. Al-Shiblawi et al.
2D SYSTEMS OF THE STRONG CORRELATED ELECTRONS: FROM FUNDAMENTAL RESEARCH TO PRACTICAL APPLICATIONS (2018)
Applying a potential difference to minimise damage to carbon fibres during carbon nanotube grafting by chemical vapour deposition
David B. Anthony et al.
NANOTECHNOLOGY (2017)
Graphene/epoxy interleaves for delamination toughening and monitoring of crack damage in carbon fibre/epoxy composite laminates
Xusheng Du et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending
P. Turner et al.
COMPOSITE STRUCTURES (2016)
Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites
Bo Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Development of sizing-free multi-functional carbon fibre nanocomposites
T. R. Pozegic et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Investigation of dynamic mode I matrix crack-fiber bundle interaction in composites using caustics
Wenfeng Hao et al.
COMPOSITES PART B-ENGINEERING (2016)
Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites
Abhishek K. Pathak et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates
Lode Daelemans et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications
N. G. Ozdemir et al.
EXPRESS POLYMER LETTERS (2016)
Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf
Huiming Ning et al.
CARBON (2015)
3D network graphene interlayer for excellent interlaminar toughness and strength in fiber reinforced composites
Jingjing Jia et al.
CARBON (2015)
The combination of carbon nanotube buckypaper and insulating adhesive for lightning strike protection of the carbon fiber/epoxy laminates
Jin-hua Han et al.
CARBON (2015)
Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg
Han Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplateletsat the fiber-matrix interphase
Wenzhen Qin et al.
COMPOSITES PART B-ENGINEERING (2015)
On the interlaminar fracture toughness of carbon fiber composites enhanced with graphene nano-species
C. Kostagiannakopoulou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils
Lode Daelemans et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Influence of graphene nanoplatelets on modes I, II and III interlaminar fracture toughness of fiber-reinforced polymer composites
B. Ahmadi-Moghadam et al.
ENGINEERING FRACTURE MECHANICS (2015)
Interlaminar Fracture Toughness of CFRP Laminates Incorporating Multi-Walled Carbon Nanotubes
Elisa Borowski et al.
POLYMERS (2015)
Delamination propagation analysis in tufted carbon fibre-reinforced plastic composites subjected to high-velocity impact
P. Deconinck et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Laser-induced porous graphene films from commercial polymers
Jian Lin et al.
NATURE COMMUNICATIONS (2014)
Mechanical Property and Structure of Covalent Functionalised Graphene/Epoxy Nanocomposites
Minoo Naebe et al.
SCIENTIFIC REPORTS (2014)
Circumventing the Mechanochemical Origins of Strength Loss in the Synthesis of Hierarchical Carbon Fibers
Stephen A. Steiner et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Long-Cheng Tang et al.
CARBON (2013)
Experimental assessment of the damage tolerance of z-pinned T-stiffened composite panels
T. M. Koh et al.
COMPOSITES PART B-ENGINEERING (2013)
Mechanical characterization and impact damage assessment of a woven carbon fiber reinforced carbon nanotube-epoxy composite
M. Tehrani et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing
F. L. Shan et al.
POLYMER COMPOSITES (2013)
Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties
Qi An et al.
CARBON (2012)
Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers
Shafi Ullah Khan et al.
CARBON (2012)
Interlaminar fracture toughness of composite laminates with CNT-enhanced nonwoven carbon tissue interleave
Seung-Hwan Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
The role of delamination in failure of fibre-reinforced composites
M. R. Wisnom
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2012)
Study of the Mode I and Mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic
I. De Baere et al.
POLYMER TESTING (2012)
Mode I Interlaminar Fracture Toughness of Nylon 66 Nanofibrilmat Interleaved Carbon/Epoxy Laminates
Shay Hamer et al.
POLYMER COMPOSITES (2011)
Toughening of a Carbon-Fibre Composite Using Electrospun Poly(Hydroxyether of Bisphenol A) Nanofibrous Membranes Through Inverse Phase Separation and Inter-Domain Etherification
Kevin Magniez et al.
MATERIALS (2011)
Electrospun nanofibre toughened carbon/epoxy composites: Effects of polyetherketone cardo (PEK-C) nanofibre diameter and interlayer thickness
Jin Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Carbon nanotube grafted silica fibres: Characterising the interface at the single fibre level
Hui Qian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Polymer Nanofabric Interleaved Composite Laminates
Kunigal Shivakumar et al.
AIAA JOURNAL (2009)
Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites
A. Godara et al.
CARBON (2009)
Hierarchical composites of carbon nanotubes on carbon fiber: influence of growth condition on fiber tensile properties
Qiuhong Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes
K. L. Kepple et al.
CARBON (2008)
Joining prepreg composite interfaces with aligned carbon nanotubes
Enrique J. Garcia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Novel carbon nanotube array-reinforced laminated composite materials with higher interlaminar elastic properties
J. L. Abot et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Improvement of damage resistance in laminated composites with electrospun nano-interlayers
Sangwook Sihn et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Mode I and mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nanofiber interlayer
Masahiro Arai et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites
A. Tugrul Seyhan et al.
ENGINEERING FRACTURE MECHANICS (2008)
Review of z-pinned composite laminates
A. P. Mouritz
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Carbon nanotube networks: Sensing of distributed strain and damage for life prediction and self healing
Erik T. Thostenson et al.
ADVANCED MATERIALS (2006)
Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites
Jonathan N. Coleman et al.
CARBON (2006)
Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites
S Mohanty et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
ZM Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Improvement of the interlaminar fracture toughness of composite laminates by whisker reinforced interlamination
WX Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)