Related references
Note: Only part of the references are listed.Enhanced mechanical properties of 3D printed graphene-polymer composite lattices at very low graphene concentrations
Kalaimani Markandan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids
Rafael M. Cardoso et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Liquid crystalline 3D printing for superstrong graphene microlattices with high density
Fang Wang et al.
CARBON (2020)
Atomistic simulations of the tensile behavior of graphene fibers
Lei Zhong et al.
EXTREME MECHANICS LETTERS (2020)
Electrolysis Activation of Fused-Filament-Fabrication 3D-Printed Electrodes for Electrochemical and Spectroelectrochemical Analysis
Denise M. Wirth et al.
ANALYTICAL CHEMISTRY (2019)
Next frontiers in cleaner synthesis: 3D printed graphene-supported CeZrLa mixed -oxide nanocatalyst for CO2 utilisation and direct propylene carbonate production
Vesna Middelkoop et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon
Xuan Zhang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets
Pamyla L. dos Santos et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
The capacitance and electron transfer of 3D-printed graphene electrodes are dramatically influenced by the type of solvent used for pre-treatment
Rui Gusmao et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Cellular Carbon-Film-Based Flexible Sensor and Waterproof Supercapacitors
Libo Gao et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
3D Printing of Ultralight Biomimetic Hierarchical Graphene Materials with Exceptional Stiffness and Resilience
Meiwen Peng et al.
ADVANCED MATERIALS (2019)
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Xinyuan Lv et al.
CERAMICS INTERNATIONAL (2019)
Theoretical strength and rubber-like behaviour in micro-sized pyrolytic carbon
Xuan Zhang et al.
NATURE NANOTECHNOLOGY (2019)
Stereolithographic 3D Printing-Based Hierarchically Cellular Lattices for High-Performance Quasi-Solid Supercapacitor
Jianzhe Xue et al.
NANO-MICRO LETTERS (2019)
Bioinspired, graphene-enabled Ni composites with high strength and toughness
Yunya Zhang et al.
SCIENCE ADVANCES (2019)
3D Printed Graphene Electrodes Modified with Prussian Blue: Emerging Electrochemical Sensing Platform for Peroxide Detection
Vera Katic et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Water-based and inkjet printable inks made by electrochemically exfoliated graphene
Khaled Parvez et al.
CARBON (2019)
Additive manufacturing high performance graphene-based composites: A review
Yan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
3D-printed flexible device combining sampling and detection of explosives
Rafael M. Cardoso et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Biomimetic and Radially Symmetric Graphene Aerogel for Flexible Electronics
Libo Gao et al.
ADVANCED ELECTRONIC MATERIALS (2019)
3D Printing of Covalent Functionalized Graphene Oxide Nanocomposite via Stereolithography
Jerome O. Palaganas et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Conducting and Lithiophilic MXene/Graphene Framework for High-Capacity, Dendrite-Free Lithium-Metal Anodes
Haodong Shi et al.
ACS NANO (2019)
Scalable submicrometer additive manufacturing
Sourabh K. Saha et al.
SCIENCE (2019)
In situ formation of uniformly dispersed Al4C3 nanorods during additive manufacturing of graphene oxide/Al mixed powders
Weiwei Zhou et al.
CARBON (2019)
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Bin Yao et al.
JOULE (2019)
Ink-based 3D printing technologies for graphene-based materials: a review
Jingfeng Wang et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Proteinase- sculptured 3D-printed graphene/polylactic acid electrodes as potential biosensing platforms: towards enzymatic modeling of 3D-printed structures
Carmen Lorena Manzanares-Palenzuela et al.
NANOSCALE (2019)
Recent advances on 3D printing graphene-based composites
Haichang Guo et al.
NANO MATERIALS SCIENCE (2019)
A fully inkjet-printed transparent humidity sensor based on a Ti3C2/Ag hybrid for touchless sensing of finger motion
Ning Li et al.
NANOSCALE (2019)
Synthesis and characterization of reinforced acrylate photosensitive resin by 2-hydroxyethyl methacrylate-functionalized graphene nanosheets for 3D printing
Jinhuan Li et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites
Jenniffer Bustillos et al.
POLYMER COMPOSITES (2018)
3D Printing Sulfur Copolymer-Graphene Architectures for Li-S Batteries
Kai Shen et al.
ADVANCED ENERGY MATERIALS (2018)
Self-Assembled Graphene-Based Architectures and Their Applications
Zhongke Yuan et al.
ADVANCED SCIENCE (2018)
Mass production and industrial applications of graphene materials
Yanwu Zhu et al.
NATIONAL SCIENCE REVIEW (2018)
Laser-Induced Graphene
Ruquan Ye et al.
ACCOUNTS OF CHEMICAL RESEARCH (2018)
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Xingwei Tang et al.
ACS NANO (2018)
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Yanqiu Jiang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Extrusion-Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Steven D. Lacey et al.
ADVANCED MATERIALS (2018)
Laminated Object Manufacturing of 3D-Printed Laser-Induced Graphene Foams
Duy Xuan Luong et al.
ADVANCED MATERIALS (2018)
3D printing for electroanalysis: From multiuse electrochemical cells to sensors
Rafael M. Cardoso et al.
ANALYTICA CHIMICA ACTA (2018)
3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
C. Lorena Manzanares Palenzuela et al.
ANALYTICAL CHEMISTRY (2018)
3D printing of graphene-doped target for matrix-free'' laser desorption/ionization mass spectrometry
Dingyi Wang et al.
CHEMICAL COMMUNICATIONS (2018)
3D printing graphene-aluminum nanocomposites
Zengrong Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Additive manufacturing of complex micro-architected graphene aerogels
Ryan M. Hensleigh et al.
MATERIALS HORIZONS (2018)
3D Printed Graphene Electrodes' Electrochemical Activation
Michelle P. Browne et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Architectured Leaf-Inspired Ni0.33Co0.66S2/Graphene Aerogels via 3D Printing for High-Performance Energy Storage
Xingwei Tang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Plastic Metal-Free Electric Motor by 3D Printing of Graphene-Polyamide Powder
Al C. de Leon et al.
ACS APPLIED ENERGY MATERIALS (2018)
Multi and mixed 3D-printing of graphene-hydroxyapatite hybrid materials for complex tissue engineering
Adam E. Jakus et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
In situ preparation of silver nanoparticles decorated graphene conductive ink for inkjet printing
Dunying Deng et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)
3D printed functional nanomaterials for electrochemical energy storage
Cheng Zhu et al.
NANO TODAY (2017)
Laser additive manufacturing bulk graphene-copper nanocomposites
Zengrong Hu et al.
NANOTECHNOLOGY (2017)
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
Daryl McManus et al.
NATURE NANOTECHNOLOGY (2017)
Electrical Differentiation of Mesenchymal Stem Cells into Schwann-Cell-Like Phenotypes Using Inkjet-Printed Graphene Circuits
Suprem R. Das et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Printing assembly and structural regulation of graphene towards three-dimensional flexible micro-supercapacitors
Wenbo Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Transparent Ag@Au-graphene patterns with conductive stability via inkjet printing
Lihong Li et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
All inkjet-printed graphene-based conductive patterns for wearable e-textile applications
Nazmul Karim et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Graphene oxide-based evaporator with one-dimensional water transport enabling high-efficiency solar desalination
Yiju Li et al.
NANO ENERGY (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Multimaterial 3D Printing of Graphene-Based Electrodes for Electrochemical Energy Storage Using Thermoresponsive Inks
Victoria G. Rocha et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Micropatterning of reduced graphene oxide by meniscus-guided printing
Won Suk Chang et al.
CARBON (2017)
Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction
Annalisa Chiappone et al.
COMPOSITES PART B-ENGINEERING (2017)
Three-Dimensional Printed Graphene Foams
Junwei Sha et al.
ACS NANO (2017)
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Amir Azhari et al.
CARBON (2017)
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Jiantong Li et al.
ACS NANO (2017)
3D-Printed, All-in-One Evaporator for High-Efficiency Solar Steam Generation under 1 Sun Illumination
Yiju Li et al.
ADVANCED MATERIALS (2017)
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
Jing Zhong et al.
CARBON (2017)
3D bioprinted graphene oxide-incorporated matrix for promoting chondrogenic differentiation of human bone marrow mesenchymal stem cells
Xuan Zhou et al.
CARBON (2017)
High-Strength Stereolithographic 3D Printed Nanocomposites: Graphene Oxide Metastability
Jill Z. Manapat et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties
Qiyi Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity (vol 105, pg 23, 2016)
Shawkat Ali et al.
CARBON (2017)
Fabrication of graphene-based 3D structures by stereolithography
Harri Korhonen et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2016)
UV Cross-Linkable Graphene/Poly(trimethylene Carbonate) Composites for 3D Printing of Electrically Conductive Scaffolds
Sepidar Sayyar et al.
ACS Applied Materials & Interfaces (2016)
Three-Dimensional Printable High-Temperature and High-Rate Heaters
Yonggang Yao et al.
ACS NANO (2016)
Microfluidic Generation of Monodisperse and Photoreconfigurable Microspheres for Floral Iridescence-Inspired Structural Colorization
Seon Ju Yeo et al.
ADVANCED MATERIALS (2016)
Hyperbolically Patterned 3D Graphene Metamaterial with Negative Poisson's Ratio and Superelasticity
Qiangqiang Zhang et al.
ADVANCED MATERIALS (2016)
Pristine Graphene Aerogels by Room-Temperature Freeze Gelation
Yue Lin et al.
ADVANCED MATERIALS (2016)
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
Kun Fu et al.
ADVANCED MATERIALS (2016)
3D Freeze-Casting of Cellular Graphene Films for Ultrahigh-Power-Density Supercapacitors
Yuanlong Shao et al.
ADVANCED MATERIALS (2016)
Electrically functional 3D-architectured graphene/SiC composites
Benito Roman-Manso et al.
CARBON (2016)
Scalable inkjet printing of shear-exfoliated graphene transparent conductive films
Subimal Majee et al.
CARBON (2016)
Inkjet-printed graphene electrodes for dye-sensitized solar cells
David Dodoo-Arhin et al.
CARBON (2016)
Three-dimensional multi-recognition flexible wearable sensor via graphene aerogel printing
Boxing An et al.
CHEMICAL COMMUNICATIONS (2016)
3D-printing technologies for electrochemical applications
Adriano Ambrosi et al.
CHEMICAL SOCIETY REVIEWS (2016)
Printing of Graphene Nanoplatelets into Highly Electrically Conductive Three-Dimensional Porous Macrostructures
Gregorio de la Osa et al.
CHEMISTRY OF MATERIALS (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
All-Polystyrene 3D-Printed Electrochemical Device with Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor
Zuhayr Rymansaib et al.
ELECTROANALYSIS (2016)
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Cheng Zhu et al.
NANO LETTERS (2016)
3D nanostructured inkjet printed graphene via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices
Suprem R. Das et al.
NANOSCALE (2016)
3D Printing of Graphene Aerogels
Qiangqiang Zhang et al.
SMALL (2016)
Inkjet printing of electrochemically-exfoliated graphene nano-platelets
Fengjuan Miao et al.
SYNTHETIC METALS (2016)
Fabrication of highly conductive graphene flexible circuits by 3D printing
Di Zhang et al.
SYNTHETIC METALS (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
Printing in Three Dimensions with Graphene
Esther Garcia-Tunon et al.
ADVANCED MATERIALS (2015)
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Ethan B. Secor et al.
ADVANCED MATERIALS (2015)
Annealed graphene sheets decorated with silver nanoparticles for inkjet printing
Gongkai Wang et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Layer-by-layer printing of laminated graphene-based interdigitated microelectrodes for flexible planar micro-supercapacitors
Gengzhi Sun et al.
ELECTROCHEMISTRY COMMUNICATIONS (2015)
Graphene fiber: a new trend in carbon fibers
Zhen Xu et al.
MATERIALS TODAY (2015)
3D stereolithography printing of graphene oxide reinforced complex architectures
Dong Lin et al.
NANOTECHNOLOGY (2015)
Highly thermally conductive and mechanically strong graphene fibers
Guoqing Xin et al.
SCIENCE (2015)
Direct Printing of Reduced Graphene Oxide on Planar or Highly Curved Surfaces with High Resolutions Using Electrohydrodynamics
Byeong Wan An et al.
SMALL (2015)
Highly compressible 3D periodic graphene aerogel microlattices
Cheng Zhu et al.
NATURE COMMUNICATIONS (2015)
Freestanding 3D graphene/cobalt sulfide composites for supercapacitors and hydrogen evolution reaction
Yang Wang et al.
RSC ADVANCES (2015)
Graphene oxide reinforced poly(vinyl alcohol): nanocomposite scaffolds for tissue engineering applications
Cijun Shuai et al.
RSC ADVANCES (2015)
3D Printing of Reduced Graphene Oxide Nanowires
Jung Hyun Kim et al.
ADVANCED MATERIALS (2015)
Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures
Amir Azhari et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)
Single-layer graphene oxide reinforced metal matrix composites by laser sintering: Microstructure and mechanical property enhancement
Dong Lin et al.
ACTA MATERIALIA (2014)
3D Micro-Extrusion of Graphene-based Active Electrodes: Towards High-Rate AC Line Filtering Performance Electrochemical Capacitors
Teressa Nathan-Walleser et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Graphene-based macroscopic assemblies and architectures: an emerging material system
Huai-Ping Cong et al.
CHEMICAL SOCIETY REVIEWS (2014)
Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates
Yahui Gao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Inkjet-printed energy storage device using graphene/polyaniline inks
Yanfei Xu et al.
JOURNAL OF POWER SOURCES (2014)
Efficient Inkjet Printing of Graphene
Jiantong Li et al.
ADVANCED MATERIALS (2013)
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Ethan B. Secor et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Directed assembly of particles using microfluidic droplets and bubbles
Teresa Brugarolas et al.
SOFT MATTER (2013)
Large-range Control of the Microstructures and Properties of Three-dimensional Porous Graphene
Xiao Xie et al.
SCIENTIFIC REPORTS (2013)
Inkjet-Printed Graphene Electronics
Felice Torrisi et al.
ACS NANO (2012)
Strong, Conductive, Lightweight, Neat Graphene Aerogel Fibers with Aligned Pores
Zhen Xu et al.
ACS NANO (2012)
Emulsifier-Free Graphene Dispersions with High Graphene Content for Printed Electronics and Freestanding Graphene Films
Folke Johannes Toelle et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Low Temperature Casting of Graphene with High Compressive Strength
Hengchang Bi et al.
ADVANCED MATERIALS (2012)
Aerographite: Ultra Lightweight, Flexible Nanowall, Carbon Microtube Material with Outstanding Mechanical Performance
Matthias Mecklenburg et al.
ADVANCED MATERIALS (2012)
Temperature-Dependent Electrical Properties of Graphene Inkjet-Printed on Flexible Materials
De Kong et al.
LANGMUIR (2012)
Biomimetic superelastic graphene-based cellular monoliths
Ling Qiu et al.
NATURE COMMUNICATIONS (2012)
Micropatterning of Graphene Sheets by Inkjet Printing and Its Wideband Dipole-Antenna Application
Keun-Young Shin et al.
ADVANCED MATERIALS (2011)
Flexible and transparent graphene films as acoustic actuator electrodes using inkjet printing
Keun-Young Shin et al.
CHEMICAL COMMUNICATIONS (2011)
Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide
Linh T. Le et al.
ELECTROCHEMISTRY COMMUNICATIONS (2011)
Alkali-treated graphene oxide as a solid base catalyst: synthesis and electrochemical capacitance of graphene/carbon composite aerogels
Fanchang Meng et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Assembly of chemically modified graphene: methods and applications
Yuxi Xu et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
High Surface Area, sp2-Cross-Linked Three-Dimensional Graphene Monoliths
Marcus A. Worsley et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors
Lu Huang et al.
NANO RESEARCH (2011)
Thermal properties of graphene and nanostructured carbon materials
Alexander A. Balandin
NATURE MATERIALS (2011)
Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition
Zongping Chen et al.
NATURE MATERIALS (2011)
Preparation of Novel 3D Graphene Networks for Supercapacitor Applications
Xiehong Cao et al.
SMALL (2011)
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Yuxi Xu et al.
ACS NANO (2010)
A Controllable Self-Assembly Method for Large-Scale Synthesis of Graphene Sponges and Free-Standing Graphene Films
Fei Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
All-Organic Vapor Sensor Using Inkjet-Printed Reduced Graphene Oxide
Vineet Dua et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Synthesis of Graphene Aerogel with High Electrical Conductivity
Marcus A. Worsley et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Graphene transistors
Frank Schwierz
NATURE NANOTECHNOLOGY (2010)
Synthesis of water soluble graphene
Yongchao Si et al.
NANO LETTERS (2008)
Superior thermal conductivity of single-layer graphene
Alexander A. Balandin et al.
NANO LETTERS (2008)
Measurement of the elastic properties and intrinsic strength of monolayer graphene
Changgu Lee et al.
SCIENCE (2008)
Ultrahigh electron mobility in suspended graphene
K. I. Bolotin et al.
SOLID STATE COMMUNICATIONS (2008)
Electric field effect in atomically thin carbon films
KS Novoselov et al.
SCIENCE (2004)