Related references
Note: Only part of the references are listed.Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites
A. Melaibari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure-based modeling on structure-mechanical property relationships in carbon nanotube/aluminum composites
Run Xu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
A study of size effects in bioinspired, nacre-like, metal-compliant phase (nickel-alumina) coextruded ceramics
Ryan P. Wilkerson et al.
ACTA MATERIALIA (2018)
Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure
C. W. Shao et al.
ACTA MATERIALIA (2018)
Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature
L. W. Yang et al.
ACTA MATERIALIA (2018)
Strong and tough metal/ceramic micro-laminates
Claudio Ferraro et al.
ACTA MATERIALIA (2018)
Strain-rate dependent deformation mechanism of graphene-Al nanolaminated composites studied using micro-pillar compression
Lei Zhao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites
Xiaolei Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Review on superior strength and enhanced ductility of metallic nanomaterials
I. A. Ovid'ko et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries
Zan Li et al.
NANO LETTERS (2018)
Uniting Strength and Toughness of Al Matrix Composites with Coordinated Al3Ni and Al3Ti Reinforcements
Frederick M. Heim et al.
ADVANCED ENGINEERING MATERIALS (2018)
Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs)
Chang-Soo Kim et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process
M. Penchal Reddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
Effect of Particles Content on Microstructure, Mechanical Properties, and Electrochemical Behavior of Aluminum-Based Hybrid Composite Processed by Accumulative Roll Bonding Process
Arash Fattah-Alhosseini et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Bioinspired, Graphene/Al2O3 Doubly Reinforced Aluminum Composites with High Strength and Toughness
Yunya Zhang et al.
NANO LETTERS (2017)
Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques
M. Penchal Reddy et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Motomichi Koyama et al.
SCIENCE (2017)
Enhanced dislocation obstruction in nanolaminated graphene/Cu composite as revealed by stress relaxation experiments
Zan Li et al.
SCRIPTA MATERIALIA (2017)
Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques
M. Penchal Reddy et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)
Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites
C. R. Mayer et al.
ACTA MATERIALIA (2016)
Stress relaxation and flow behavior of ultrafine grained AA 1050
Mohammad Sadegh Mohebbi et al.
MECHANICS OF MATERIALS (2015)
Enhanced Mechanical Properties of Graphene (Reduced Graphene Oxide)/Aluminum Composites with a Bioinspired Nanolaminated Structure
Zan Li et al.
NANO LETTERS (2015)
Magnetically assisted slip casting of bioinspired heterogeneous composites
Hortense Le Ferrand et al.
NATURE MATERIALS (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Joshua J. Martin et al.
NATURE COMMUNICATIONS (2015)
Bioinspired structural materials
Ulrike G. K. Wegst et al.
NATURE MATERIALS (2015)
Harmonic-structured copper: performance and proof of fabrication concept based on severe plastic deformation of powders
Choncharoen Sawangrat et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Fabrication of Al-2 vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties
M. Reihanian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Making strong nanomaterials ductile with gradients
K. Lu
SCIENCE (2014)
Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process
Morteza Afizadeh et al.
COMPOSITES PART B-ENGINEERING (2013)
Structural and Mechanical Properties of Al/B4C Composites Fabricated by Wet Attrition Milling and Hot Extrusion
Morteza Alizadeh et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)
Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy
Xizhou Kai et al.
SCRIPTA MATERIALIA (2013)
Microstructure and mechanical properties of extruded Al/Al2O3 composites fabricated by stir-casting process
H. R. Ezatpour et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
A review of experimental techniques to produce a nacre-like structure
I. Corni et al.
BIOINSPIRATION & BIOMIMETICS (2012)
Production of high strength Al-Al2O3 composite by accumulative roll bonding
M. Rezayat et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Randall M. Erb et al.
SCIENCE (2012)
Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy
G. Fribourg et al.
ACTA MATERIALIA (2011)
Refinement of microstructure and improvement of mechanical properties of Al/Al2O3 cast composite by accumulative roll bonding process
Sajjad Amirkhanlou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility
Lin Jiang et al.
SCRIPTA MATERIALIA (2011)
Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials
Horacio D. Espinosa et al.
NATURE COMMUNICATIONS (2011)
A novel biomimetic approach to the design of high-performance ceramic-metal composites
Maximilien E. Launey et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength-elongation correlation
J. da Costa Teixeira et al.
ACTA MATERIALIA (2009)
An enhanced continuum model for size-dependent strengthening and failure of particle-reinforced composites
Yeong Sung Suh et al.
ACTA MATERIALIA (2009)
Micro structural features and mechanical properties of Al-Al3Ti composite fabricated by in-situ powder metallurgy route
V. Abbasi Chianeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
An efficient hybrid conventional method to fabricate nacre-like bulk nano-laminar composites
O. Oner Ekiz et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2009)
The absence of thermal expansion mismatch strengthening in nanostructured metal-matrix composites
R. Vogt et al.
SCRIPTA MATERIALIA (2009)
Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites
Song Min
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
About the determination of the thermal and athermal stress components from stress-relaxation experiments
T. Kruml et al.
ACTA MATERIALIA (2008)
Bioinspired design and assembly of platelet reinforced polymer films
Lorenz J. Bonderer et al.
SCIENCE (2008)
Tough, Bio-Inspired Hybrid Materials
E. Munch et al.
SCIENCE (2008)
Structure-property optimization of ultrafine-grained dual-phase steels using a micro structure-based strain hardening model
M. Delince et al.
ACTA MATERIALIA (2007)
Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys
B. Q. Han et al.
ACTA MATERIALIA (2006)
Metal matrix composites - From science to technological significance
DB Miracle
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Hall-Petch relation and boundary strengthening
N Hansen
SCRIPTA MATERIALIA (2004)
Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites
YC Kang et al.
MATERIALS CHEMISTRY AND PHYSICS (2004)
Share Paper
