Related references
Note: Only part of the references are listed.Fabrication of efficient and stable Li4SiO4-based sorbent pellets via extrusion-spheronization for cyclic CO2 capture
Long Ma et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Sorbents screening for post-combustion CO2 capture via combined temperature and pressure swing adsorption
Chaitanya Dhoke et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Understanding the catalytic acceleration effect of steam on CaCO3 decomposition by density function theory
Donglin He et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Understanding the morphology of supported Na2CO3/γ-AlOOH solid sorbent and its CO2 sorption performance
Tianyi Cai et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Fast Adsorption Kinetics of CO2 on Solid Amine Sorbent Measured Using Microfluidized Bed Thermogravimetric Analysis
Shihui Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Enhanced CO2 sorption capacity of amine-tethered fly ash residues derived from co-firing of coal and biomass blends
Chuanwen Zhao et al.
APPLIED ENERGY (2019)
Comprehensive solubility of N2O and mass transfer studies on an effective reactive N,N-dimethylethanolamine (DMEA) solvent for post-combustion CO2 capture
Hao Ling et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Toward Understanding the Kinetics of CO2 Capture on Sodium Carbonate
Tianyi Cai et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Comparison of adsorption capacity of mono-ethanolamine and di-ethanolamine impregnated activated carbon in a multi-staged fluidized bed reactor for carbon-dioxide capture
Dipa Das et al.
FUEL (2018)
Experimental study of the adsorber performance in a multi-stage fluidized bed system for continuous CO2 capture by means of temperature swing adsorption
Florian Dietrich et al.
FUEL PROCESSING TECHNOLOGY (2018)
Gas-solid fluidization with liquid bridging: A review from a modeling perspective
C. M. Boyce
POWDER TECHNOLOGY (2018)
Circulating Fluid-Bed Studies for CO2 Capture from Flue Gas using K2CO3/Al2O3 Adsorbent
Surajit Sengupta et al.
ENERGY & FUELS (2018)
A multi-stage fluidized bed system for continuous CO2 capture by means of temperature swing adsorption - First results from bench scale experiments
Gerhard Schoeny et al.
POWDER TECHNOLOGY (2017)
Microporous amine-functionalized aromatic polymers and their carbonized products for CO2 adsorption
Pillaiyar Puthiaraj et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Hydrodynamics of a multi-stage counter-current fluidized bed reactor with down-comer for amine impregnated activated carbon particle system
Dipa Das et al.
ADVANCED POWDER TECHNOLOGY (2017)
Reuse and recycling of amine-functionalized silica materials for CO2 adsorption
E. S. Sanz-Perez et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Parametric study on the regeneration heat requirement of an amine-based solid adsorbent process for post-combustion carbon capture
Wenbin Zhang et al.
APPLIED ENERGY (2016)
Introduction and evaluation of a double loop staged fluidized bed system for post-combustion CO2 capture using solid sorbents in a continuous temperature swing adsorption process
Tobias Proell et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Untangling the Impacts of Climate Change on Waterborne Diseases: a Systematic Review of Relationships between Diarrheal Diseases and Temperature, Rainfall, Flooding, and Drought
Karen Levy et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)
Changing atmospheric CO2 concentration was the primary driver of early Cenozoic climate
Eleni Anagnostou et al.
NATURE (2016)
CO2 sorption and reaction kinetic performance of K2CO3/AC in low temperature and CO2 concentration
Yafei Guo et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Removal of low concentration CO2 at ambient temperature using several potassium-based sorbents
Chuanwen Zhao et al.
APPLIED ENERGY (2014)
Test Operation Results of the 10 MWe-scale Dry-sorbent CO2 Capture Process Integrated with a Real Coal-fired Power Plant in Korea
Young Cheol Park et al.
12TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-12 (2014)
Carbon Dioxide Capture Using Solid Sorbents in a Fluidized Bed with Reduced Pressure Regeneration in a Downer
Sunti Kongkitisupchai et al.
AICHE JOURNAL (2013)
K2CO3/Al2O3 for Capturing CO2 in Flue Gas from Power Plants. Part 5: Carbonation and Failure Behavior of K2CO3/Al2O3 in the Continuous CO2 Sorption-Desorption System
Ye Wu et al.
ENERGY & FUELS (2013)
K2CO3/Al2O3 for Capturing CO2 in Flue Gas from Power Plants. Part 2: Regeneration Behaviors of K2CO3/Al2O3
Chuanwen Zhao et al.
ENERGY & FUELS (2012)
K2CO3/Al2O3 for Capturing CO2 in Flue Gas from Power Plants. Part 1: Carbonation Behaviors of K2CO3/Al2O3
Chuanwen Zhao et al.
ENERGY & FUELS (2012)
CO2 Separation by a New Solid K-Fe Sorbent
Bo-Tao Zhang et al.
ENERGY & FUELS (2011)
CO2 Absorption Using Dry Potassium-Based Sorbents with Different Supports
Chuanwen Zhao et al.
ENERGY & FUELS (2009)
Novel regenerable potassium-based dry sorbents for CO2 capture at low temperatures
Soo Chool Lee et al.
JOURNAL OF MOLECULAR CATALYSIS B-ENZYMATIC (2009)
Effect of bed height on the carbon dioxide capture by carbonation/regeneration cyclic operations using dry potassium-based sorbents
Young Cheol Park et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2009)
Effects of water vapor pretreatment time and reaction temperature on CO2 capture characteristics of a sodium-based solid sorbent in a bubbling fluidized-bed reactor
Yongwon Seo et al.
CHEMOSPHERE (2007)
Continuous operation of the potassium-based dry sorbent CO2 capture process with two fluidized-bed reactors
Chang-Keun Yi et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2007)