Related references
Note: Only part of the references are listed.PEDOT:PSS in Water and Toluene for Organic Devices-Technical Approach
Beata Jewloszewicz et al.
POLYMERS (2020)
Fabrication and Characterization of Humidity Sensors Based on Graphene Oxide-PEDOT:PSS Composites on a Flexible Substrate
Francisco J. Romero et al.
MICROMACHINES (2020)
All printed organic humidity sensor based on egg albumin
Muhammad Umair Khan et al.
SENSING AND BIO-SENSING RESEARCH (2020)
Design, fabrication and characterization of capacitive humidity sensors based on emerging flexible technologies
Francisco J. Romero et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Cost-Effective PEDOT:PSS Temperature Sensors Inkjetted on a Bendable Substrate by a Consumer Printer
Almudena Rivadeneyra et al.
POLYMERS (2019)
Bio-compatible organic humidity sensor based on natural inner egg shell membrane with multilayer crosslinked fiber structure
Muhammad Umair Khan et al.
SCIENTIFIC REPORTS (2019)
Dopant passivation by adsorbed water monomers causes high humidity sensitivity in PEDOT: PSS thin films at ppm-level humidity
Faramarz Hossein-Babaei et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Hybrid organic/inorganic position-sensitive detectors based on PEDOT:PSS/n-Si
Mohammad Javadi et al.
APPLIED PHYSICS LETTERS (2018)
Low Cost Humidity Sensor Based on PANI/PEDOT:PSS Printed on Paper
Rogerio M. Morais et al.
IEEE SENSORS JOURNAL (2018)
Wide range and stable ink-jet printed humidity sensor based on graphene and zinc oxide nanocomposite
Gul Hassan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Synthesis of highly conductive PEDOT:PSS and correlation with hierarchical structure
Tatsuhiro Horii et al.
POLYMER (2018)
Wide range highly sensitive relative humidity sensor based on series combination of MoS2 and PEDOT:PSS sensors array
Ghayas Uddin Siddiqui et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Influence of relative humidity on the electrical response of PEDOT: PSS based organic field-effect transistor
Qayyum Zafar et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
High-Performance porous MIM-type capacitive humidity sensor realized via inductive coupled plasma and reactive-Ion etching
Tian Qiang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Thickness effects of aerosol deposited hygroscopic films on ultra-sensitive humidity sensors
Jun-Ge Liang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Enhancement of the thermoelectric properties of PEDOT:PSS via one-step treatment with cosolvents or their solutions of organic salts
Siyao Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Design and Mechanisms of Asymmetric Supercapacitors
Yuanlong Shao et al.
CHEMICAL REVIEWS (2018)
A Potassium Metal-Organic Framework based on Perylene-3,4,9,10-tetracarboxylate as Sensing Layer for Humidity Actuators
Jose Manuel Seco et al.
SCIENTIFIC REPORTS (2018)
Temperature and Electric Field Influence on the Electrical Properties of Light-Emitting Devices Comprising PEDOT:PSS/GPTMS/Zn2SIO4:Mn Composites
Flavio H. Feres et al.
MRS ADVANCES (2018)
Compositional engineering of the pi-conjugated small molecular VOPcPhO : Alq3 complex to boost humidity sensing
Noshin Fatima et al.
RSC ADVANCES (2017)
Significantly improved photovoltaic performance in polymer bulk heterojunction solar cells with graphene oxide/PEDOT: PSS double decked hole transport layer
Saqib Rafique et al.
SCIENTIFIC REPORTS (2017)
Low turn-on voltage perovskite light-emitting diodes with methanol treated PEDOT:PSS as hole transport layer
Zijun Wang et al.
APPLIED PHYSICS LETTERS (2017)
Humidity-dependent thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)
Gun-Ho Kim et al.
APPLIED PHYSICS LETTERS (2016)
Conductivity and dielectric properties of PEDOT-PSS doped DMSO nano composite thin films
Apsar Pasha et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)
Electrical properties of multi-walled carbon nanotubes/PEDOT:PSS nanocomposites thin films under temperature and humidity effects
Abderrahmane Benchirouf et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Electronic Conduction in Ti/Poly-TiO2/Ti Structures
Faramarz Hossein-Babaei et al.
SCIENTIFIC REPORTS (2016)
The role of the hole-extraction layer in determining the operational stability of a polycarbazole: fullerene bulk-heterojunction photovoltaic device
E. Bovill et al.
APPLIED PHYSICS LETTERS (2015)
Humidity Sensor Based on PEDOT:PSS and Zinc Stannate Nano-composite
Shahid Aziz et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Forming ohmic Ag/SnO2 contacts
Faramarz Hossein-Babaei et al.
MATERIALS LETTERS (2015)
Effects of humidity on the electrical properties of thermal inkjet-printed films of copper tetrasulfonated phthalocyanine (CuTsPc) onto paper substrates
Tiago Carneiro Gomes et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Modeling ion conduction and electrochemical reactions in water films on thin-film metal electrodes with application to low temperature fuel cells
Iryna V. Zenyuk et al.
ELECTROCHIMICA ACTA (2014)
A gold/organic semiconductor diode for ppm-level humidity sensing
Faramarz Hossein-Babaei et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Alteration of pore size distribution by sol-gel impregnation for dynamic range and sensitivity adjustment in Kelvin condensation-based humidity sensors
F. Hossein-Babaei et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Characterization of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) thin film deposited through electrohydrodynamic atomization technique
Navaneethan Duraisamy et al.
MATERIALS LETTERS (2012)
Thermal inkjet printing of polyaniline on paper
T. C. Gomes et al.
THIN SOLID FILMS (2012)
Electrical characterization of PEDOT:PSS beyond humidity saturation
Mahmut Kus et al.
SENSORS AND ACTUATORS B-CHEMICAL (2009)