Related references
Note: Only part of the references are listed.Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
V. Cruz et al.
CORROSION SCIENCE (2020)
On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation
Bassem Barkia et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
Rongpei Shi et al.
ACTA MATERIALIA (2020)
The significance of spatial length scales and solute segregation in strengthening rapid solidification microstructures of 316L stainless steel
Tatu Pinomaa et al.
ACTA MATERIALIA (2020)
EIS comparative study and critical Equivalent Electrical Circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel
Reynier I. Revilla et al.
CORROSION SCIENCE (2020)
Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes
Zan Li et al.
SCRIPTA MATERIALIA (2020)
Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation
Shilei Li et al.
SCRIPTA MATERIALIA (2020)
Interplay of dislocation substructure and elastic strain evolution in additively manufactured Inconel 625
Kathryn A. Small et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
K. M. Bertsch et al.
ACTA MATERIALIA (2020)
Multiaxial plasticity and fracture behavior of stainless steel 316L by laser powder bed fusion: Experiments and computational modeling
Alexander E. Wilson-Heid et al.
ACTA MATERIALIA (2020)
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
Olivier Andreau et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes
Decheng Kong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
O. O. Salman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2019)
Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion
Chola Elangeswaran et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment
Nan Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microscale residual stresses in additively manufactured stainless steel
Wen Chen et al.
NATURE COMMUNICATIONS (2019)
Construction of Cellular Substructure in Laser Powder Bed Fusion
Yafei Wang et al.
METALS (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
Tomasz Kurzynowski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
Md. Shamsujjoha et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion
Fuyao Yan et al.
SCRIPTA MATERIALIA (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel
Chunlei Qiu et al.
SCIENTIFIC REPORTS (2018)
Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting
Yuan Zhong et al.
FUSION ENGINEERING AND DESIGN (2017)
Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
M. S. Pham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel
G. T. Gray et al.
ACTA MATERIALIA (2017)
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
Tien T. Roehling et al.
ACTA MATERIALIA (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
On the evaluation of the Bauschinger effect in an austenitic stainless steel-The role of multi-scale residual stresses
Jianan Hu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
Jason R. Trelewicz et al.
JOM (2016)
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Critical assessment 19: stacking fault energies of austenitic steels
Y.-K. Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting
K. Saeidi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Artefacts in geometric phase analysis of compound materials
Jonathan J. P. Peters et al.
ULTRAMICROSCOPY (2015)
Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions
Kamran Saeidi et al.
RSC ADVANCES (2015)
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
A. Riemer et al.
ENGINEERING FRACTURE MECHANICS (2014)
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
Amanda S. Wu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
XRDUA: crystalline phase distribution maps by two-dimensional scanning and tomographic (micro) X-ray powder diffraction
Wout De Nolf et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2014)
Controlling factors in tensile deformation of nanocrystalline cobalt and nickel
Y. M. Wang et al.
PHYSICAL REVIEW B (2012)
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel
A. Dumay et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel
Sandip Ghosh Chowdhury et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Enabling strain hardening simulations with dislocation dynamics
A. Arsenlis et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2007)
Orientation selection in dendritic evolution
Tomorr Haxhimali et al.
NATURE MATERIALS (2006)
Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures
M. R. Daymond et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
A non-singular continuum theory of dislocations
W Cai et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)
Measurement of the displacement field of dislocations to 0.03 Å by electron microscopy
MJ Hytch et al.
NATURE (2003)
THERMO-CALC & DICTRA, computational tools for materials science
JO Andersson et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)
In situ measurement of grain rotation during deformation of polycrystals
L Margulies et al.
SCIENCE (2001)
DICTRA, a tool for simulation of diffusional transformations in alloys
A Borgenstam et al.
JOURNAL OF PHASE EQUILIBRIA (2000)
Share Paper
