Related references
Note: Only part of the references are listed.Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability
Yuki Otani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Grain Structure Evolution of Al-Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
Michael Rasch et al.
MATERIALS (2020)
On the role of Zr content into Portevin-Le Chatelier (PLC) effect of selective laser melted high strength Al-Cu-Mg-Mn alloy
Xiaojia Nie et al.
MATERIALS LETTERS (2019)
Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting
Jeremy H. Rao et al.
SCRIPTA MATERIALIA (2019)
Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting
Ruidi Li et al.
MATERIALS & DESIGN (2019)
Microstructure, mechanical properties and strengthening mechanisms of AlCu5MnCdVA aluminum alloy fabricated by selective laser melting
Zhiheng Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Effects of θ' precipitates on the mechanical performance and fracture behavior of an Al-Cu alloy subjected to overaged condition
Lin Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Precipitation during high temperature aging of Al-Cu alloys: A multiscale analysis based on first principles calculations
H. Liu et al.
ACTA MATERIALIA (2019)
Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion
Le Zhou et al.
SCRIPTA MATERIALIA (2019)
Experimental investigation and modelling of yield strength and work hardening behaviour of artificially aged Al-Cu-Li alloy
Yong Li et al.
MATERIALS & DESIGN (2019)
Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
P. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys
Xiaojia Nie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Improvement of high temperature strength of 2219 alloy by Sc and Zr addition through a novel three-stage heat treatment route
S. Mondol et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Pei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Contact angle evolution during selective laser melting
Zhiheng Hu et al.
MATERIALS & DESIGN (2018)
A precipitation hardening model for Al-Cu-Cd alloys
Yisen Hu et al.
MATERIALS & DESIGN (2018)
On the role of atmospheric oxygen into mechanical properties and fracture behavior of selective laser melted AlCu5MnCdVA
Zhiheng Hu et al.
MATERIALS & DESIGN (2018)
On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting
O. Gharbi et al.
CORROSION SCIENCE (2018)
Superior mechanical properties induced by the interaction between dislocations and precipitates in the electro-pulsing treated Al-Mg-Si alloys
Yi-tong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
An Analysis of Strengthening Mechanisms and Rate-Dependence in a High Strength Aluminum Alloy
B. Cao et al.
JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2018)
Deformation structures and strengthening mechanisms in an Al-Mg-Sc-Zr alloy
S. Malopheyev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Atomic-scale mechanism of the θ→θ′ phase transformation in Al-Cu alloys
Zhenju Shen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
Hu Zhang et al.
SCRIPTA MATERIALIA (2017)
The influence of Sc solute partitioning on the microalloying effect and mechanical properties of Al-Cu alloys with minor Sc addition
C. Yang et al.
ACTA MATERIALIA (2016)
Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al-Zn-Mg alloys
Kaka Ma et al.
ACTA MATERIALIA (2016)
Dislocation-based plasticity and strengthening mechanisms in sub 20 nm lamellar structures in pearlitic steel wire
Xiaodan Zhang et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
Matthias Markl et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Effect of precipitates on mechanical properties of AA2195
Jae-Hee Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting
R. Munoz-Moreno et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties
Hu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Strengthening mechanisms of graphene- and Al2O3-reinforced aluminum nanocomposites synthesized by room temperature milling
Meysam Tabandeh-Khorshid et al.
MATERIALS & DESIGN (2016)
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
Kaka Ma et al.
ACTA MATERIALIA (2014)
Tensile properties of an acicular ferrite and martensite/austenite constituent steel with varying cooling rates
Lei Fan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of external stress aging on morphology and precipitation behavior θ phase in Al-Cu alloy
Shang Fu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
The influence of precipitation on plastic deformation of Al-Cu-Li alloys
A. Deschamps et al.
ACTA MATERIALIA (2013)
Effect of interfacial solute segregation on ductile fracture of Al-Cu-Sc alloys
B. A. Chen et al.
ACTA MATERIALIA (2013)
The superposition of strengthening contributions in engineering alloys
A. de Vaucorbeil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
An Atomistic-Based Hierarchical Multiscale Examination of Age Hardening in an Al-Cu Alloy
Chandra Veer Singh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Structure and energetics of the coherent interface between the θ′ precipitate phase and aluminium in Al-Cu
Laure Bourgeois et al.
ACTA MATERIALIA (2011)
Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy
G. Fribourg et al.
ACTA MATERIALIA (2011)
Casting defects induced fatigue damage in aircraft frames of ZL205A aluminum alloy - A failure analysis
Bo Li et al.
MATERIALS & DESIGN (2011)
The kinetics of precipitation in Al-2.4 wt% Cu alloy by Kissinger, Ozawa, Bosswel and Matusita methods
M. Fatmi et al.
PHYSICA B-CONDENSED MATTER (2011)
On the Hall-Petch relationship in a nanostructured Al-Cu alloy
T. Shanmugasundaram et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength-elongation correlation
J. da Costa Teixeira et al.
ACTA MATERIALIA (2009)
Strengthening mechanisms in cryomilled ultrafine-grained aluminum alloy at quasi-static and dynamic rates of loading
Buyang Cao et al.
SCRIPTA MATERIALIA (2009)
Strengthening of an Al-Cu-Sn alloy by deformation-resistant precipitate plates
J. F. Nie et al.
ACTA MATERIALIA (2008)
On the strengthening response of aluminum alloys containing shear-resistant plate-shaped precipitates
J. da Costa Teixeira et al.
ACTA MATERIALIA (2008)
Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation
S. Cheng et al.
ACTA MATERIALIA (2007)
First-principles aluminum database: Energetics of binary Al alloys and compounds
C Wolverton et al.
PHYSICAL REVIEW B (2006)
Predicting metastable phase boundaries in Al-Cu alloys from first-principles calculations of free energies: The role of atomic vibrations
C Ravi et al.
EUROPHYSICS LETTERS (2006)
A method of measuring stored energy macroscopically using statistically stored dislocations in commercial purity aluminum
M Taheri et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Spatiotemporal aspects of the Portevin-Le Chatelier effect in annealed and solution-treated aluminum alloys
HF Jiang et al.
SCRIPTA MATERIALIA (2006)
The shearable-non-shearable transition in Al-Mg-Si-Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture
WJ Poole et al.
PHILOSOPHICAL MAGAZINE (2005)
Deformation and activation volumes of cryomilled ultrafine-grained aluminum
RW Hayes et al.
ACTA MATERIALIA (2004)
Multiscale modeling of θ′ precipitation in Al-Cu binary alloys
V Vaithyanathan et al.
ACTA MATERIALIA (2004)
The influences of multiscale-sized second-phase particles on ductility of aged aluminum alloys
G Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation
Y Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys
DN Seidman et al.
ACTA MATERIALIA (2002)
Comments on a comparison of early and recent work on the effect of trace additions of Cd, In, or Sn on nucleation and growth of θ′ in Al-Cu alloys
JM Silcock et al.
SCRIPTA MATERIALIA (2002)