Related references
Note: Only part of the references are listed.3D printable and injectable lactoferrin-loaded carboxymethyl cellulose-glycol chitosan hydrogels for tissue engineering applications
Gopinathan Janarthanan et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Self-crosslinking hyaluronic acid-carboxymethylcellulose hydrogel enhances multilayered 3D-printed construct shape integrity and mechanical stability for soft tissue engineering
Gopinathan Janarthanan et al.
BIOFABRICATION (2020)
Multiscale bioprinting of vascularized models
Amir K. Miri et al.
BIOMATERIALS (2019)
Alginate-graphene oxide hydrogels with enhanced ionic tunability and chemomechanical stability for light-directed 3D printing
Thomas M. Valentin et al.
CARBON (2019)
Collagen-based bioinks for hard tissue engineering applications: a comprehensive review
C. F. Marques et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Graphene-Based Nanocomposites for Neural Tissue Engineering
Ho Pan Bei et al.
MOLECULES (2019)
Wood-based nanocellulose and bioactive glass modified gelatin-alginate bioinks for 3D bioprinting of bone cells
Miina Ojansivu et al.
BIOFABRICATION (2019)
In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds
Mohammed Albanna et al.
SCIENTIFIC REPORTS (2019)
Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing
Jia Min Lee et al.
APPLIED PHYSICS REVIEWS (2019)
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Tao Jiang et al.
APPLIED PHYSICS REVIEWS (2019)
Therapeutic Remodeling of the Tumor Microenvironment Enhances Nanoparticle Delivery
Yuanxin Chen et al.
ADVANCED SCIENCE (2019)
Recent advances in high-strength and elastic hydrogels for 3D printing in biomedical applications
Cancan Xu et al.
ACTA BIOMATERIALIA (2019)
In situ three-dimensional printing for reparative and regenerative therapy
Nureddin Ashammakhi et al.
BIOMEDICAL MICRODEVICES (2019)
Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications
Haishun Du et al.
CARBOHYDRATE POLYMERS (2019)
Graphene inks for the 3D printing of cell culture scaffolds and related molecular arrays
George Mihail Vlasceanu et al.
COMPOSITES PART B-ENGINEERING (2019)
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Gianluca Cidonio et al.
BIOFABRICATION (2019)
Polydiacetylene-Nanoparticle-Functionalized Microgels for Topical Bacterial Infection Treatment
Jie Tao et al.
ACS MACRO LETTERS (2019)
Bioprinting a Synthetic Smectic Clay for Orthopedic Applications
Samson Afewerki et al.
ADVANCED HEALTHCARE MATERIALS (2019)
3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review
Sandya S. Athukoralalage et al.
POLYMERS (2019)
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Pouyan Ahangar et al.
APPLIED SCIENCES-BASEL (2019)
Peripheral Nerve Conduit: Materials and Structures
Shadi Houshyar et al.
ACS CHEMICAL NEUROSCIENCE (2019)
Nanodiamond/poly-ε-caprolactone nanofibrous scaffold for wound management
Shadi Houshyar et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Prasansha Rastogi et al.
BIOFABRICATION (2019)
Emerging and innovative approaches for wound healing and skin regeneration: Current status and advances
Dimple Chouhan et al.
BIOMATERIALS (2019)
Bioprinting functional tissues
Ashley N. Leberfinger et al.
ACTA BIOMATERIALIA (2019)
3D bioprinting of hydrogel-based biomimetic microenvironments
Yongxiang Luo et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
3D Bioprinted Scaffolds Containing Viable Macrophages and Antibiotics Promote Clearance of Staphylococcus aureus Craniotomy-Associated Biofilm Infection
Amy Aldrich et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Tissue-engineering of vascular grafts containing endothelium and smooth-muscle using triple-coaxial cell printing
Ge Gao et al.
APPLIED PHYSICS REVIEWS (2019)
Review on carbon nanomaterials as typical candidates for orthopaedic coatings
Sayali Yashwant Bhong et al.
SN APPLIED SCIENCES (2019)
A skin-inspired 3D bilayer scaffold enhances granulation tissue formation and anti-infection for diabetic wound healing
Wenbing Wan et al.
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Conductive collagen/polypyrrole-b-polycaprolactone hydrogel for bioprinting of neural tissue constructs
Sanjairaj Vijayavenkataraman et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2019)
The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development
Anna Sorushanova et al.
ADVANCED MATERIALS (2019)
A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
Fate of Carbon Nanotubes Locally Implanted in Mice Evaluated by Near-Infrared Fluorescence Imaging: Implications for Tissue Regeneration
Eri Hirata et al.
ACS APPLIED NANO MATERIALS (2019)
Nanoengineered Colloidal Inks for 3D Bioprinting
Charles W. Peak et al.
LANGMUIR (2018)
Laponite (R) : A key nanoplatform for biomedical applications?
Helena Tomas et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2018)
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Milena Nadgorny et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Nanoengineered Ionic-Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
David Chimene et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Modulation of Angiogenic Activity by Light-Activatable miRNA-Loaded Nanocarriers
Miguel M. Lino et al.
ACS NANO (2018)
Nanoengineered injectable hydrogels for wound healing application
Giriraj Lokhande et al.
ACTA BIOMATERIALIA (2018)
Potential and Limitations of Nanocelluloses as Components in Biocomposite Inks for Three-Dimensional Bioprinting and for Biomedical Devices
Gary Chinga-Carrasco
BIOMACROMOLECULES (2018)
Silk fibroin-bioactive glass based advanced biomaterials: towards patient-specific bone grafts
Swati Midha et al.
BIOMEDICAL MATERIALS (2018)
Tailor-made conductive inks from cellulose nanofibrils for 3D printing of neural guidelines
Volodymyr Kuzmenko et al.
CARBOHYDRATE POLYMERS (2018)
3D Bioprinting Stem Cell Derived Tissues
Nishat Tasnim et al.
CELLULAR AND MOLECULAR BIOENGINEERING (2018)
3D printing with cellulose materials
Qianqian Wang et al.
CELLULOSE (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Bioprinting and its applications in tissue engineering and regenerative medicine
Waeljumah Aljohani et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Dialdehyde cellulose nanocrystal/gelatin hydrogel optimized for 3D printing applications
Yani Jiang et al.
JOURNAL OF MATERIALS SCIENCE (2018)
3D printing nano conductive multi-walled carbon nanotube scaffolds for nerve regeneration
Se-Jun Lee et al.
JOURNAL OF NEURAL ENGINEERING (2018)
Handheld skin printer: in situ formation of planar biomaterials and tissues
Navid Hakimi et al.
LAB ON A CHIP (2018)
3D printing hydrogel with graphene oxide is functional in cartilage protection by influencing the signal pathway of Rank/Rankl/OPG
Zhong Cheng et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
3D printing for cardiovascular tissue engineering: a review
Abhishek Roy et al.
MATERIALS TECHNOLOGY (2018)
Three-dimensional printing of multilayered tissue engineering scaffolds
Sean M. Bittner et al.
MATERIALS TODAY (2018)
Photosensitizer-Encapsulated Ferritins Mediate Photodynamic Therapy against Cancer-Associated Fibroblasts and Improve Tumor Accumulation of Nanoparticles
Lu Li et al.
MOLECULAR PHARMACEUTICS (2018)
UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering
Mohammad Izadifar et al.
TISSUE ENGINEERING PART C-METHODS (2018)
Bioprinting of mineralized constructs utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink
Tilman Ahlfeld et al.
BIOFABRICATION (2018)
An integrated multi-layer 3D-fabrication of PDA/RGD coated graphene loaded PCL nanoscaffold for peripheral nerve restoration
Yun Qian et al.
NATURE COMMUNICATIONS (2018)
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Ahasan Habib et al.
MATERIALS (2018)
3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering
Arianna De Mori et al.
POLYMERS (2018)
Bioinks for 3D bioprinting: an overview
P. Selcan Gungor-Ozkerim et al.
BIOMATERIALS SCIENCE (2018)
Human Knee Meniscus Regeneration Strategies: a Review on Recent Advances
Mamatha M. Pillai et al.
CURRENT OSTEOPOROSIS REPORTS (2018)
3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering
Yongxiang Luo et al.
MATERIALS & DESIGN (2018)
3D bioprinting for cardiovascular regeneration and pharmacology
Haitao Cui et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
Click Chemistry-Based Injectable Hydrogels and Bioprinting Inks for Tissue Engineering Applications
Janarthanan Gopinathan et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2018)
Safety Assessment of Graphene-Based Materials: Focus on Human Health and the Environment
Bengt Fadeel et al.
ACS NANO (2018)
Biomimetic Mineralization of Three-Dimensional Printed Alginate/TEMPO-Oxidized Cellulose Nanofibril Scaffolds for Bone Tissue Engineering
Ragab E. Abouzeid et al.
BIOMACROMOLECULES (2018)
Cardiovascular tissue bioprinting: Physical and chemical processes
James B. Hu et al.
APPLIED PHYSICS REVIEWS (2018)
3D printing in cell culture systems and medical applications
Max J. Lerman et al.
APPLIED PHYSICS REVIEWS (2018)
Modulating physical, chemical, and biological properties in 3D printing for tissue engineering applications
Claire Yu et al.
APPLIED PHYSICS REVIEWS (2018)
Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering
Assaf Shapira et al.
APPLIED PHYSICS REVIEWS (2018)
Optimization of gelatin-alginate composite bioink printability using rheological parameters: a systematic approach
Teng Gao et al.
BIOFABRICATION (2018)
A Methylcellulose Hydrogel as Support for 3D Plotting of Complex Shaped Calcium Phosphate Scaffolds
Tilman Ahlfeld et al.
GELS (2018)
3D bioprinting for cell culture and tissue fabrication
Honglei Jian et al.
BIO-DESIGN AND MANUFACTURING (2018)
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Tae-Sik Jang et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2018)
Skin bioprinting: a novel approach for creating artificial skin from synthetic and natural building blocks
Robin Augustine
PROGRESS IN BIOMATERIALS (2018)
Synthesis and characterizations of alginate-alpha-tricalcium phosphate microparticle hybrid film with flexibility and high mechanical property as a biomaterial
Dipankar Das et al.
BIOMEDICAL MATERIALS (2018)
Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments
Wanjun Liu et al.
BIOFABRICATION (2018)
A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry
Avathamsa Athirasala et al.
BIOFABRICATION (2018)
Research and development of 3D printed vasculature constructs
Xinda Li et al.
BIOFABRICATION (2018)
Advances in 3D Bioprinting for Neural Tissue Engineering
Se-Jun Lee et al.
ADVANCED BIOSYSTEMS (2018)
Rapid Continuous Multimaterial Extrusion Bioprinting
Wanjun Liu et al.
ADVANCED MATERIALS (2017)
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Ryan Trombetta et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering
Bin Duan
ANNALS OF BIOMEDICAL ENGINEERING (2017)
3D Bioprinting for Organ Regeneration
Haitao Cui et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Development of a novel alginate-polyvinyl alcohol-hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds
Stephanie T. Bendtsen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Induction of mesenchymal stem cell differentiation in the absence of soluble inducer for cutaneous wound regeneration by a chitin nanofiber-based hydrogel
Kangquan Shou et al.
Journal of Tissue Engineering and Regenerative Medicine (2017)
Fabrication and characterization of a 3D bioprinted nanoparticle-hydrogel hybrid device for biomimetic detoxification
Maggie S. Chen et al.
NANOSCALE (2017)
Mechanistic understanding of nanoparticles' interactions with extracellular matrix: the cell and immune system
Ayse Basak Engin et al.
PARTICLE AND FIBRE TOXICOLOGY (2017)
Bio-inks for 3D bioprinting: recent advances and future prospects
Ilze Donderwinkel et al.
POLYMER CHEMISTRY (2017)
Tissue Engineering and Regenerative Medicine: New Trends and Directions-A Year in Review
Manuela E. Gomes et al.
TISSUE ENGINEERING PART B-REVIEWS (2017)
Short-term hypoxic preconditioning promotes prevascularization in 3D bioprinted bone constructs with stromal vascular fraction derived cells
Mitchell A. Kuss et al.
RSC ADVANCES (2017)
Nanocellulosic materials as bioinks for 3D bioprinting
Carmen C. Piras et al.
BIOMATERIALS SCIENCE (2017)
A graphene-polyurethane composite hydrogel as a potential bioink for 3D bioprinting and differentiation of neural stem cells
Chao-Ting Huang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration
Xinyun Zhai et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Effects of Hydroxyapatite and Hypoxia on Chondrogenesis and Hypertrophy in 3D Bioprinted ADMSC Laden Constructs
Ying Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
In Situ Printing-then-Mixing for Biological Structure Fabrication Using Intersecting Jets
Kyle Christensen et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration
Xinyun Zhai et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Effects of Hydroxyapatite and Hypoxia on Chondrogenesis and Hypertrophy in 3D Bioprinted ADMSC Laden Constructs
Ying Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
In Situ Printing-then-Mixing for Biological Structure Fabrication Using Intersecting Jets
Kyle Christensen et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications
Virginie Keriquel et al.
SCIENTIFIC REPORTS (2017)
Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics
Jae Sung Park et al.
SCIENTIFIC REPORTS (2017)
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Scott A. Wilson et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Bone matrix production in hydroxyapatite-modified hydrogels suitable for bone bioprinting
Annika Wenz et al.
BIOFABRICATION (2017)
Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability
Naomi Paxton et al.
BIOFABRICATION (2017)
Catalytically Initiated Gel-in-Gel Printing of Composite Hydrogels
Amrita Basu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Polysaccharides based injectable hydrogel compositing bio-glass for cranial bone repair
Xiao Bai et al.
CARBOHYDRATE POLYMERS (2017)
Decellularized extracellular matrix: a step towards the next generation source for bioink manufacturing
Byoung Soo Kim et al.
BIOFABRICATION (2017)
Development of a clay based bioink for 3D cell printing for skeletal application
T. Ahlfeld et al.
BIOFABRICATION (2017)
3D bioprinting of soft materials-based regenerative vascular structures and tissues
Zimeng Zhang et al.
COMPOSITES PART B-ENGINEERING (2017)
Fabrication of Hierarchical Macroporous Biocompatible Scaffolds by Combining Pickering High Internal Phase Emulsion Templates with Three-Dimensional Printing
Ting Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D-Printable Bioactivated Nanocellulose-Alginate Hydrogels
Jenni Leppiniemi et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D bioprinting of structural proteins
Malgorzata K. Wlodarczyk-Biegun et al.
BIOMATERIALS (2017)
Functional Nanoclay Suspension for Printing-Then-Solidification of Liquid Materials
Yifei Jin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Huijun Li et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of nano-cellulosic biomaterials for medical applications
Sahar Sultan et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Self-Supporting Nanoclay as Internal Scaffold Material for Direct Printing of Soft Hydrogel Composite Structures in Air
Yifei Jin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D bioprinted graphene oxide-incorporated matrix for promoting chondrogenic differentiation of human bone marrow mesenchymal stem cells
Xuan Zhou et al.
CARBON (2017)
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Gilberto Siqueira et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Kai Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing
Yang Yang et al.
ADVANCED MATERIALS (2017)
4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials
Yi-Chen Li et al.
BIOFABRICATION (2017)
The bioink: A comprehensive review on bioprintable materials
Monika Hospodiuk et al.
BIOTECHNOLOGY ADVANCES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Mechanically Stiff Nanocomposite Hydrogels at Ultralow Nanoparticle Content
Manish K. Jaiswal et al.
ACS NANO (2016)
3D Biomaterial Microarrays for Regenerative Medicine: Current State-of-the-Art, Emerging Directions and Future Trends
Akhilesh K. Gaharwar et al.
ADVANCED MATERIALS (2016)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Tomasz Jungst et al.
CHEMICAL REVIEWS (2016)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Andreas Blaeser et al.
ADVANCED HEALTHCARE MATERIALS (2016)
3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique
Annalisa Chiappone et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Xuan Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Nanoengineered biomaterials for repair and regeneration of orthopedic tissue interfaces
Lauren M. Cross et al.
ACTA BIOMATERIALIA (2016)
Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
Rouhollah D. Farahani et al.
ADVANCED MATERIALS (2016)
A Bioactive Carbon Nanotube-Based Ink for Printing 2D and 3D Flexible Electronics
Su Ryon Shin et al.
ADVANCED MATERIALS (2016)
Advanced Bioinks for 3D Printing: A Materials Science Perspective
David Chimene et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
Bioprinting and Differentiation of Stem Cells
Scott A. Irvine et al.
MOLECULES (2016)
A Hydrogel Model Incorporating 3D-Plotted Hydroxyapatite for Osteochondral Tissue
Michal Bartnikowski et al.
MATERIALS (2016)
Nano hydroxyapatite particles promote osteogenesis in a three-dimensional bio-printing construct consisting of alginate/gelatin/hASCs
Xiao-Fei Wang et al.
RSC ADVANCES (2016)
Dual-Stage Crosslinking of a Gel-Phase Bioink Improves Cell Viability and Homogeneity for 3D Bioprinting
Karen Dubbin et al.
ADVANCED HEALTHCARE MATERIALS (2016)
3D printed structures for delivery of biomolecules and cells: tissue repair and regeneration
Ju Young Park et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells
Lokesh Karthik Narayanan et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells
Lokesh Karthik Narayanan et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Analysis of nanoparticle delivery to tumours
Stefan Wilhelm et al.
NATURE REVIEWS MATERIALS (2016)
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Karl M. O. Hakansson et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
Improved Human Bone Marrow Mesenchymal Stem Cell Osteogenesis in 3D Bioprinted Tissue Scaffolds with Low Intensity Pulsed Ultrasound Stimulation
Xuan Zhou et al.
SCIENTIFIC REPORTS (2016)
Multifunctional 3D printing of heterogeneous hydrogel structures
Ali Nadernezhad et al.
SCIENTIFIC REPORTS (2016)
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Huijun Li et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2016)
Towards artificial tissue models: past, present, and future of 3D bioprinting
Ahu Arslan-Yildiz et al.
BIOFABRICATION (2016)
Bioink properties before, during and after 3D bioprinting
Katja Hoelzl et al.
BIOFABRICATION (2016)
Alginate/Nanohydroxyapatite Scaffolds with Designed Core/Shell Structures Fabricated by 3D Plotting and in Situ Mineralization for Bone Tissue Engineering
Yongxiang Luo et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Sungmin Hong et al.
ADVANCED MATERIALS (2015)
3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications
Kajsa Markstedt et al.
BIOMACROMOLECULES (2015)
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Kan Yue et al.
BIOMATERIALS (2015)
(Intra)Cellular Stability of Inorganic Nanoparticles: Effects on Cytotoxicity, Particle Functionality, and Biomedical Applications
Stefaan J. Soenen et al.
CHEMICAL REVIEWS (2015)
Novel self-assembly-induced 3D plotting for macro/nano-porous collagen scaffolds comprised of nanofibrous collagen filaments
Kwan-Ha Shin et al.
MATERIALS LETTERS (2015)
Integrating biologically inspired nanomaterials and table-top stereolithography for 3D printed biomimetic osteochondral scaffolds
Nathan J. Castro et al.
NANOSCALE (2015)
3D Printing of Scaffolds for Tissue Regeneration Applications
Anh-Vu Do et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Bioinspired Polymeric Nanocomposites for Regenerative Medicine
James K. Carrow et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2015)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
Nanocomposite Hydrogels for Biomedical Applications
Akhilesh K. Gaharwar et al.
BIOTECHNOLOGY AND BIOENGINEERING (2014)
Sustained delivery of proangiogenic microRNA-132 by nanoparticle transfection improves endothelial cell transplantation
Julie Devalliere et al.
FASEB JOURNAL (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Maling Gou et al.
NATURE COMMUNICATIONS (2014)
Cell-laden Microengineered and Mechanically Tunable Hybrid Hydrogels of Gelatin and Graphene Oxide
Su Ryon Shin et al.
ADVANCED MATERIALS (2013)
Cellular Targets and Mechanisms in the Cytotoxic Action of Non-biodegradable Engineered Nanoparticles
Eleonore Fröhlich
CURRENT DRUG METABOLISM (2013)
3D Printed Bionic Ears
Manu S. Mannoor et al.
NANO LETTERS (2013)
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Jordan S. Miller et al.
NATURE MATERIALS (2012)
Biodegradable Cellulose-based Hydrogels: Design and Applications
Alessandro Sannino et al.
MATERIALS (2009)