Related references
Note: Only part of the references are listed.Perpendicular MXene Arrays with Periodic Interspaces toward Dendrite-Free Lithium Metal Anodes with High-Rate Capabilities
Zhenjiang Cao et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Dendrite-Free Lithium Plating Induced by In Situ Transferring Protection Layer from Separator
Zhiyu Hu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Fluorine-incorporated interface enhances cycling stability of lithium metal batteries with Ni-rich NCM cathodes
Yongwon Lee et al.
NANO ENERGY (2020)
Electrical Conductivity Gradient Based on Heterofibrous Scaffolds for Stable Lithium-Metal Batteries
Sang-Ho Hong et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Self-Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh-Rate and Large-Capacity Lithium-Metal Anode
Gang Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition
Rajesh Pathak et al.
NATURE COMMUNICATIONS (2020)
The Failure of Solid Electrolyte Interphase on Li Metal Anode: Structural Uniformity or Mechanical Strength?
Xin Shen et al.
ADVANCED ENERGY MATERIALS (2020)
In Situ Formation of Li3P Layer Enables Fast Li+ Conduction across Li/Solid Polymer Electrolyte Interface
Nan Wu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Experimental evaluation of thermolysis-driven gas emissions from LiPF 6-carbonate electrolyte used in lithium -ion batteries
Zhenghai Liao et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
3D lithiophilic-lithiophobic-lithiophilic dual-gradient porous skeleton for highly stable lithium metal anode
Hongfei Zheng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
A copper-clad lithiophilic current collector for dendrite-free lithium metal anodes
Ke Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Efficient Li-Ion-Conductive Layer for the Realization of Highly Stable High-Voltage and High-Capacity Lithium Metal Batteries
Jung-In Lee et al.
ADVANCED ENERGY MATERIALS (2019)
Electro-Chemo-Mechanical Issues at the Interfaces in Solid-State Lithium Metal Batteries
Peng Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
An Autotransferable g-C3N4 Li+-Modulating Layer toward Stable Lithium Anodes
Yanpeng Guo et al.
ADVANCED MATERIALS (2019)
High Dielectric, Robust Composite Protective Layer for Dendrite-Free and LiPF6 Degradation-Free Lithium Metal Anode
Eun Kwang Jong et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Forming Covalent Crosslinks between Polymer-Grafted Nanoparticles as a Route to Highly Filled and Mechanically Robust Nanocomposites
Joshua M. Kubiak et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Quantifying inactive lithium in lithium metal batteries
Chengcheng Fang et al.
NATURE (2019)
Ultrathin Bilayer of Graphite/SiO2 as Solid Interface for Reviving Li Metal Anode
Rajesh Pathak et al.
ADVANCED ENERGY MATERIALS (2019)
Highly Stable Lithium Metal Anode Interface via Molecular Layer Deposition Zircone Coatings for Long Life Next-Generation Battery Systems
Keegan R. Adair et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Self-Healable Solid Polymeric Electrolytes for Stable and Flexible Lithium Metal Batteries
Na Wu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Barium Titanate-Based Porous Ceramic Flexible Membrane as a Separator for Room-Temperature Sodium-Ion Battery
R. Arunkumar et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
An Electron/Ion Dual-Conductive Alloy Framework for High-Rate and High-Capacity Solid-State Lithium-Metal Batteries
Chunpeng Yang et al.
ADVANCED MATERIALS (2019)
Detecting Li Dendrites in a Two-Electrode Battery System
Tuo Wang et al.
ADVANCED MATERIALS (2019)
LiFSI to improve lithium deposition in carbonate electrolyte
Gaojing Yang et al.
ENERGY STORAGE MATERIALS (2019)
Asymmetric behaviour of Li/Li symmetric cells for Li metal batteries
Dongho Koo et al.
CHEMICAL COMMUNICATIONS (2019)
Lithium Dendrite Growth Suppression and Ionic Conductivity of Li2S-P2S5-P2O5 Glass Solid Electrolytes Prepared by Mechanical Milling
Mazlum Cengiz et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Flower-shaped lithium nitride as a protective layer via facile plasma activation for stable lithium metal anodes
Ke Chen et al.
ENERGY STORAGE MATERIALS (2019)
An ethyl methyl sulfone co-solvent eliminates macroscopic morphological instabilities of lithium metal anode
Woochul Shin et al.
CHEMICAL COMMUNICATIONS (2019)
High Polarity Poly(vinylidene difluoride) Thin Coating for Dendrite-Free and High-Performance Lithium Metal Anodes
Jing Luo et al.
ADVANCED ENERGY MATERIALS (2018)
Surface and Electrochemical Studies on Silicon Diphosphide as Easy-to-Handle Anode Material for Lithium-Based Batteries-the Phosphorus Path
Romy Reinhold et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Two-Dimensional Phosphorene-Derived Protective Layers on a Lithium Metal Anode for Lithium-Oxygen Batteries
Youngjin Kim et al.
ACS NANO (2018)
Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode
Rui Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Stabilizing Lithium Plating by a Biphasic Surface Layer Formed InSitu
Quan Pang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes
Nian-Wu Li et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Three-Dimensional, Solid-State Mixed Electron-Ion Conductive Framework for Lithium Metal Anode
Shaomao Xu et al.
NANO LETTERS (2018)
Lithium phosphide/lithium chloride coating on lithium for advanced lithium metal anode
Liangdong Lin et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
A Localized High-Concentration Electrolyte with Optimized Solvents and Lithium Difluoro(oxalate)borate Additive for Stable Lithium Metal Batteries
Lu Yu et al.
ACS ENERGY LETTERS (2018)
Facile Solution Synthesis of Red Phosphorus Nanoparticles for Lithium Ion Battery Anodes
Fei Wang et al.
NANOSCALE RESEARCH LETTERS (2018)
Enabling Stable Lithium Metal Anode via 3D Inorganic Skeleton with Superlithiophilic Interphase
Lei Fan et al.
ADVANCED ENERGY MATERIALS (2018)
Effect of the Electrolyte on the Cycling Efficiency of Lithium-Limited Cells and their Morphology Studied Through in Situ Optical Imaging
Rodrigo Rodriguez et al.
ACS APPLIED ENERGY MATERIALS (2018)
Long lifespan lithium metal anodes enabled by Al2O3 sputter coating
Liping Wang et al.
ENERGY STORAGE MATERIALS (2018)
Reviving the lithium metal anode for high-energy batteries
Dingchang Lin et al.
NATURE NANOTECHNOLOGY (2017)
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Kuan-Hung Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Investigation into the stability of Li metal anodes in Li-O2 batteries with a redox mediator
Seongmin Ha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
The interplay between solid electrolyte interface (SEI) and dendritic lithium growth
Bingbin Wu et al.
NANO ENERGY (2017)
Synergism of Al-containing solid electrolyte interphase layer and Al-based colloidal particles for stable lithium anode
Huan Ye et al.
NANO ENERGY (2017)
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Xin-Bing Cheng et al.
CHEMICAL REVIEWS (2017)
Promise and reality of post-lithium-ion batteries with high energy densities
Jang Wook Choi et al.
NATURE REVIEWS MATERIALS (2016)
Enabling Catalytic Oxidation of Li2O2 at the Liquid-Solid Interface: The Evolution of an Aprotic Li-O2 Battery
Ningning Feng et al.
CHEMSUSCHEM (2015)
Water adsorption induced in-plane domain switching on BaTiO3 surface
X. Li et al.
JOURNAL OF APPLIED PHYSICS (2015)
A simple composite protective layer coating that enhances the cycling stability of lithium metal batteries
Hongkyung Lee et al.
JOURNAL OF POWER SOURCES (2015)
Phosphorus-carbon nanocomposite anodes for lithium-ion and sodium-ion batteries
Thrinathreddy Ramireddy et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Ionic Liquid-Nanoparticle Hybrid Electrolytes and their Application in Secondary Lithium-Metal Batteries
Yingying Lu et al.
ADVANCED MATERIALS (2012)
Challenges Facing Lithium Batteries and Electrical Double-Layer Capacitors
Nam-Soon Choi et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)
Adsorption of CO, CO2 and NO molecules on a BaTiO3 (001) surface
G. Rakotovelo et al.
SURFACE SCIENCE (2009)
Share Paper
