Related references
Note: Only part of the references are listed.Design for Additive Manufacturing of Functionally Graded Lattice Structures: A Design Method with Process Induced Anisotropy Consideration
Cong Hong Phong Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
3D printing build orientation optimization for flexible support platform
Hongyao Shen et al.
RAPID PROTOTYPING JOURNAL (2020)
3D topology optimization for cost and time minimization in additive manufacturing
Graeme Sabiston et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
3D-printed sensors: Current progress and future challenges
Mohammad Reza Khosravani et al.
SENSORS AND ACTUATORS A-PHYSICAL (2020)
Implications of lattice structures on economics and productivity of metal powder bed fusion
Inigo Flores et al.
ADDITIVE MANUFACTURING (2020)
A new approach to eliminating enclosed voids in topology optimization for additive manufacturing
Yulin Xiong et al.
ADDITIVE MANUFACTURING (2020)
A survey of design methods for material extrusion polymer 3D printing
Jiaqi Huang et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Investigations on the Mechanical Response of Gradient Lattice Structures Manufactured via SLM
Judyta Sienkiewicz et al.
METALS (2020)
Sustainability performance indicators for additive manufacturing: a literature review based on product life cycle studies
Getasew Taddese et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A reliable build orientation optimization method in additive manufacturing: the application to FDM technology
Luca Di Angelo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Buckling behavior of additively manufactured cellular columns: Experimental and simulation validation
Aamer Nazir et al.
MATERIALS & DESIGN (2020)
Joining aluminium profiles to composite sheets by additive manufacturing and forming
R. J. S. Baptista et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Three-dimensional high resolution topology optimization considering additive manufacturing constraints
Kaiqing Zhang et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing and characterization of brittle foams
Sirui Bi et al.
MECHANICS OF MATERIALS (2020)
A Wireless-controlled 3D printed Robotic Hand Motion System with Flex Force Sensors
Fazil Salman et al.
SENSORS AND ACTUATORS A-PHYSICAL (2020)
Shape and topology optimization considering anisotropic features induced by additive manufacturing processes
Charles Dapogny et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Topology optimization considering overhang constraint in additive manufacturing
Kaiqing Zhang et al.
COMPUTERS & STRUCTURES (2019)
A novel optimization design method of additive manufacturing oriented porous structures and experimental validation
Jiaqi Zhao et al.
MATERIALS & DESIGN (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Optimised lattice structure configuration for additive manufacturing
Nadhir Lebaal et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Self-supporting structure design for additive manufacturing by using a logistic aggregate function
Yu-Hsin Kuo et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Design and Manufacturing Strategies for Fused Deposition Modelling in Additive Manufacturing: A Review
Hugo I. Medellin-Castillo et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2019)
Self-supporting overhang structures produced by additive manufacturing through electron beam melting
Wadea Ameen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
Aamer Nazir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Design for additive manufacturing: cellular structures in early-stage aerospace design
MaX M. J. Opgenoord et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
On utilizing topology optimization to design support structure to prevent residual stress induced build failure in laser powder bed metal additive manufacturing
Lin Cheng et al.
ADDITIVE MANUFACTURING (2019)
Understanding the sustainability potential of part consolidation design supported by additive manufacturing
Sheng Yang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review
Mehrshad Mehrpouya et al.
APPLIED SCIENCES-BASEL (2019)
Optimization of process planning for reducing material waste in extrusion based additive manufacturing
Jingchao Jiang et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
Buckling and Post-Buckling Behavior of Uniform and Variable-Density Lattice Columns Fabricated Using Additive Manufacturing
Aamer Nazir et al.
MATERIALS (2019)
Evaluation of Support Structure Removability for Additively Manufactured Ti6Al4V Overhangs via Electron Beam Melting
Wadea Ameen et al.
METALS (2019)
Integrated component-support topology optimization for additive manufacturing with post-machining
Matthijs Langelaar
RAPID PROTOTYPING JOURNAL (2019)
Multi-solution nature of topology optimization and its application in design for additive manufacturing
Hassan Rezayat et al.
RAPID PROTOTYPING JOURNAL (2019)
Modelling multiply connected heterogeneous objects using mixed-dimensional material reference features
G. K. Sharma et al.
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2019)
Designing for Big Area Additive Manufacturing
Alex Roschli et al.
ADDITIVE MANUFACTURING (2019)
Polyether ether ketone (PEEK) and its manufacturing of customised 3D printed dentistry parts using additive manufacturing
Abid Haleem et al.
CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)
Hybrid Metal/Composite Lattice Structures: Design for Additive Manufacturing
Francesco Di Caprio et al.
AEROSPACE (2019)
Weight reduction by topology optimization of an engine subframe mount, designed for additive manufacturing production
Andrea Merulla et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
First observation of the effect of the layer printing sequence on the molecular structure of three-dimensionally printed polymer, as shown by in-plane capacitance measurement
Naga B. Gundrati et al.
COMPOSITES PART B-ENGINEERING (2018)
A new approach for fabrication of titanium-titanium boride periodic composite via additive manufacturing and pressure-less sintering
Esmat Sheydaeian et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening
Yingbin Hu et al.
COMPOSITES PART B-ENGINEERING (2018)
Fabrication and properties of novel polymer-metal composites using fused deposition modeling
Matthew A. Ryder et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Topology optimization of self-supporting structures with polygon features for additive manufacturing
Weihong Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Topology optimization for concurrent design of structures with multi-patch microstructures by level sets
Hao Li et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing
Dawei Li et al.
COMPUTER-AIDED DESIGN (2018)
The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
Francesco Tamburrino et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2018)
Towards a Numerical Approach of Finding Candidates for Additive Manufacturing-Enabled Part Consolidation
Sheng Yang et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Design and analysis of strut-based lattice structures for vibration isolation
Wahyudin P. Syam et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Geometric modeling of lattice structures for additive manufacturing
Gianpaolo Savio et al.
RAPID PROTOTYPING JOURNAL (2018)
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Tao Peng et al.
ADDITIVE MANUFACTURING (2018)
Design of Additively Manufactured Lattice Structures for Tissue Regeneration
Antonio Lanzotti et al.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)
Fast prediction of thermal distortion in metal powder bed fusion additive manufacturing: Part 2, a quasi-static thermo-mechanical model
Hao Peng et al.
ADDITIVE MANUFACTURING (2018)
Build orientation optimization for multi-part production in additive manufacturing
Yicha Zhang et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2017)
A lightweight and support-free design method for selective laser melting
Zhonghua Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
A Design for Additive Manufacturing Ontology
Mahmoud Dinar et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2017)
Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation
Lin Cheng et al.
RAPID PROTOTYPING JOURNAL (2017)
3D-printing of materials with anisotropic heat distribution using conductive polylactic acid composites
Yuan Zhuang et al.
MATERIALS & DESIGN (2017)
Deviation Modeling and Shape transformation in Design for Additive Manufacturing
Zuowei Zhu et al.
COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT (2017)
Macro and nanoscale wear behaviour of Al-Al2O3 nanocomposites fabricated by selective laser melting
Quanquan Han et al.
COMPOSITES PART B-ENGINEERING (2017)
Algorithm-driven design of fracture resistant composite materials realized through additive manufacturing
Grace X. Gu et al.
ADDITIVE MANUFACTURING (2017)
A Generic Sustainability Assessment Model towards Consolidated Parts Fabricated by Additive Manufacturing Process
Sheng Yang et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
On the wear properties of Nylon6-SiC-Al2O3 based fused deposition modelling feed stock filament
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2017)
Selective metallization on copper aluminate composite via laser direct structuring technology
Jong-uk Yang et al.
COMPOSITES PART B-ENGINEERING (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
3D PRINTING Additive manufacturing of polymer-derived ceramics
Zak C. Eckel et al.
SCIENCE (2016)
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Mary Kathryn Thompson et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2016)
An additive manufacturing process model for product family design
Ningrong Lei et al.
JOURNAL OF ENGINEERING DESIGN (2016)
A Cost-Driven Design Methodology for Additive Manufactured Variable Platforms in Product Families
Xiling Yao et al.
JOURNAL OF MECHANICAL DESIGN (2016)
Damage evolution and failure mechanisms in additively manufactured stainless steel
Holly D. Carlton et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Y. Tang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
A survey of the design methods for additive manufacturing to improve functional performance
Yunlong Tang et al.
RAPID PROTOTYPING JOURNAL (2016)
How herbivores coopt plant defenses: natural selection, specialization, and sequestration
Georg Petschenka et al.
CURRENT OPINION IN INSECT SCIENCE (2016)
Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders
C. Gosselin et al.
MATERIALS & DESIGN (2016)
Guidelines for AM part consolidation
Jikai Liu
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
A new methodological framework for design for additive manufacturing
Martin Kumke et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Lightweight Metal Cellular Structures Fabricated via 3D Printing of Sand Cast Molds
Dean Snelling et al.
ADVANCED ENGINEERING MATERIALS (2015)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing
Adam Hehr et al.
COMPOSITES PART B-ENGINEERING (2015)
Additive manufacturing-enabled design theory and methodology: a critical review
Sheng Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Mechanical response of Ti-6Al-4V octet-truss lattice structures
Liang Dong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Special Issue: Design for Additive Manufacturing: A Paradigm Shift in Design, Fabrication, and Qualification
David W. Rosen et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Investigating the Role of Geometric Dimensioning and Tolerancing in Additive Manufacturing
Gaurav Ameta et al.
JOURNAL OF MECHANICAL DESIGN (2015)
(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing
John Schmelzle et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound
Jayasheelan Vaithilingam et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
Craig Brice et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel
G. Casalino et al.
OPTICS AND LASER TECHNOLOGY (2015)
Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
Seyed Mohammad Ahmadi et al.
MATERIALS (2015)
Indirect additive manufacturing based casting of a periodic 3D cellular metal - Flow simulation of molten aluminum alloy
Jiwon Mun et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
“Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing”, 2nd Edition
Jonathan Edgar et al.
Johnson Matthey Technology Review (2015)
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Yong Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Shape recovery effect of 3D printed polymeric honeycomb
Y. L. Yap et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures
Ruben Wauthle et al.
ADDITIVE MANUFACTURING (2015)
Design for additive manufacturing in customized products
Hyunwoong Ko et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Current trends in the design of scaffolds for computer-aided tissue engineering
S. M. Giannitelli et al.
ACTA BIOMATERIALIA (2014)
Acoustic absorbers by additive manufacturing
Foteini Setaki et al.
BUILDING AND ENVIRONMENT (2014)
Clever Support: Efficient Support Structure Generation for Digital Fabrication
J. Vanek et al.
COMPUTER GRAPHICS FORUM (2014)
Experimental validation of 3D printed patient-specific implants using digital image correlation and finite element analysis
Alok Sutradhar et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2014)
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
F. Calignano
MATERIALS & DESIGN (2014)
Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures
Martin Leary et al.
MATERIALS & DESIGN (2014)
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Optimization of scaffold design for bone tissue engineering: A computational and experimental study
Marta R. Dias et al.
MEDICAL ENGINEERING & PHYSICS (2014)
On three-dimensional dilational elastic metamaterials
Tiemo Bueckmann et al.
NEW JOURNAL OF PHYSICS (2014)
State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering
M. Tarik Arafat et al.
RAPID PROTOTYPING JOURNAL (2014)
A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process
Remi Ponche et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2014)
Ultralight, Ultrastiff Mechanical Metamaterials
Xiaoyu Zheng et al.
SCIENCE (2014)
Direct laser writing of auxetic structures: present capabilities and challenges
Stefan Hengsbach et al.
SMART MATERIALS AND STRUCTURES (2014)
3D Printing for the Rapid Prototyping of Structural Electronics
Eric Macdonald et al.
IEEE ACCESS (2014)
Challenges and Opportunities in Design for Additive Manufacturing
Carolyn Conner Seepersad
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Design for Additive Manufacturing-Element transitions and aggregated structures
Guido A. O. Adama et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2014)
Metamaterials: 3D Soft Metamaterials with Negative Poisson's Ratio (Adv. Mater. 36/2013)
Sahab Babaee et al.
ADVANCED MATERIALS (2013)
Tapered labyrinthine acoustic metamaterials for broadband impedance matching
Yangbo Xie et al.
APPLIED PHYSICS LETTERS (2013)
Cellular Loop: a chair based on biomimetics
Anke Bernotat
BAUTECHNIK (2013)
A new approach to the design and optimisation of support structures in additive manufacturing
G. Strano et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing
Florent Le Bourhis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools
Khurram Altaf et al.
RAPID PROTOTYPING JOURNAL (2013)
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Multiple material additive manufacturing - Part 1: a review This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2013)
Heuristic Optimization Method for Cellular Structure Design of Light Weight Components
Jason Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds
Gary A. Fielding et al.
DENTAL MATERIALS (2012)
The hierarchical structure and mechanics of plant materials
Lorna J. Gibson
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
Amit Joe Lopes et al.
RAPID PROTOTYPING JOURNAL (2012)
Metallic additive manufacturing: state-of-the-art review and prospects
Benjamin Vayre et al.
MECHANICS & INDUSTRY (2012)
Design of Auxetic Structures via Mathematical Optimization
J. Schwerdtfeger et al.
ADVANCED MATERIALS (2011)
The Bionic Handling Assistant: a success story of additive manufacturing
Andrzej Grzesiak et al.
ASSEMBLY AUTOMATION (2011)
Topology design and freeform fabrication of deployable structures with lattice skins
Uma Maheshwaraa Namasivayam et al.
RAPID PROTOTYPING JOURNAL (2011)
On the Mechanistic Origins of Toughness in Bone
Maximilien E. Launey et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Combined micro and macro additive manufacturing of a swirling flow coaxial phacoemulsifier sleeve with internal micro-vanes
Jae-Won Choi et al.
BIOMEDICAL MICRODEVICES (2010)
Highly porous titanium scaffolds for orthopaedic applications
Bogdan Dabrowski et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
Structure, function, and self-assembly of single network gyroid (I4132) photonic crystals in butterfly wing scales
Vinodkumar Saranathan et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
Topological optimization for designing patient-specific large craniofacial segmental bone replacements
Alok Sutradhar et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
INKtelligent printing (R) for sensorial applications
Marcus Maiwald et al.
SENSOR REVIEW (2010)
Genetic-algorithm-based multi-objective optimization of the build orientation in stereolithography
V. Canellidis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Additive fabrication technologies applied to medicine and health care: a review
J. Giannatsis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Modeling of porous structures for rapid prototyping of tissue engineering scaffolds
Antonio Armillotta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2007)
Design and freeform fabrication of deployable structures with lattice skins
Uma Maheshwaraa et al.
RAPID PROTOTYPING JOURNAL (2007)
Yield surfaces of various periodic metal honeycombs at intermediate relative density
AJ Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Cellular metal lattices with hollow trusses
DT Queheillalt et al.
ACTA MATERIALIA (2005)
Single member actuation in large repetitive truss structures
N Wicks et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
Mechanics of linear cellular alloys
AM Hayes et al.
MECHANICS OF MATERIALS (2004)
Freeform fabrication of zinc-air batteries and electromechanical assemblies
E Malone et al.
RAPID PROTOTYPING JOURNAL (2004)
Fabrication and structural performance of periodic cellular metal sandwich structures
HNG Wadley et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Manufacture of the die of an automobile deck part based on rapid prototyping and rapid tooling technology
YH Song et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Effective properties of the octet-truss lattice material
VS Deshpande et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)
A role for surface topography in creating and maintaining bone at titanium endosseous implants
LF Cooper
JOURNAL OF PROSTHETIC DENTISTRY (2000)
A new class of extremal composites
O Sigmund
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
Share Paper
