Related references
Note: Only part of the references are listed.The Hall-Petch and inverse Hall-Petch relations and the hardness of nanocrystalline metals
Sneha N. Naik et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Fatigue crack threshold analysis of TiAl SENT and CC specimens - Influence of starter notch and precracking
S. Eck et al.
INTERMETALLICS (2020)
Effects of lamellar orientation on the fracture toughness of TiAl PST crystals
Yongzhe Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Deformation of lamellar γ-TiAl below the general yield stress
Thomas Edward James Edwards et al.
ACTA MATERIALIA (2019)
Fatigue crack growth behavior of wrought γ-based TiAl alloy containing β-phase
Loris Jonathan Signori et al.
INTERMETALLICS (2018)
Effect of microstructure on the fracture toughness of multi-phase high Nb-containing TiAl alloys
Bin Zhu et al.
INTERMETALLICS (2018)
Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings
Matthew S. Dahar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
Fritz Appel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Recent progress in the high-cycle fatigue behaviour of gamma-TiAl alloys
T. E. J. Edwards
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Slip transfer across gamma-TiAl lamellae in tension
Alberto Jesus Palomares-Garcia et al.
MATERIALS & DESIGN (2018)
Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase gamma-TiAl based alloy
Petra Erdely et al.
ACTA MATERIALIA (2018)
Metallurgical processing of titanium aluminides on industrial scale
Volker Guether et al.
INTERMETALLICS (2018)
Fatigue crack growth and fracture behavior of as-cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) compared to Ti-48Al-2Nb-2Cr (4822)
Matthew S. Dahar et al.
INTERMETALLICS (2017)
Deformation modes and size effect in near-γ TiAl alloys
Jean-Philippe Monchoux et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Improvement of microstructure, mechanical properties and hot workability of a TiAl-Nb-Mo alloy through hot extrusion
Wenchen Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy
Petra Erdely et al.
MATERIALS & DESIGN (2017)
Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy
Zhipeng Wan et al.
MATERIALS & DESIGN (2017)
Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures
T. Klein et al.
ACTA MATERIALIA (2017)
Intermetallic β-Solidifying γ-TiAl Based Alloys - From Fundamental Research to Application
Svea Mayer et al.
ADVANCED ENGINEERING MATERIALS (2017)
Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression
Alberto Jesus Palomares-Garcia et al.
ACTA MATERIALIA (2017)
TiAl alloys in commercial aircraft engines
B. P. Bewlay et al.
MATERIALS AT HIGH TEMPERATURES (2016)
Creep behavior and deformation feature of TiAl-Nb alloy with various states at high temperature
Tian Sugui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Deformation behavior of high Nb containing TiAl based alloy in α plus γ two phase field region
S. Z. Zhang et al.
MATERIALS & DESIGN (2016)
Oxidation protection of γ-TiAl-based alloys - A review
Raluca Pflumm et al.
INTERMETALLICS (2015)
Intermetallic Titanium Aluminides as Innovative High Temperature Lightweight Structural Materials - How Materialographic Methods Have Contributed to Their Development
H. Clemens et al.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY (2015)
Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy
Emanuel Schwaighofer et al.
INTERMETALLICS (2014)
Microstructural characterisation of fatigue crack growth fracture surfaces of lamellar Ti45Al2Mn2Nb1B
J. Yang et al.
INTERMETALLICS (2014)
Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures
T. Leitner et al.
INTERMETALLICS (2014)
High-temperature oxidation behavior of multi-phase Mo-containing γ-TiAl-based alloys
Raluca Pflumm et al.
INTERMETALLICS (2014)
Inoculated Titanium Aluminide Alloys and Their Predicted Propensity for Grain Refinement
D. Gosslar et al.
JOM (2014)
Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression
Jianbo Li et al.
MATERIALS CHARACTERIZATION (2014)
Hot-working behavior of an advanced intermetallic multi-phase γ-TiAl based alloy
Emanuel Schwaighofer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a β-phase containing TiAl alloy
T. Schmoelzer et al.
INTERMETALLICS (2013)
Effects of extrusion deformation on microstructure, mechanical properties and hot workability of β containing TiAl alloy
W. C. Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of lamellar spacing on fatigue crack growth behaviour of a TiAl-based aluminide with lamellar microstructure
Yoji Mine et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
The Characterisation of a Powder Metallurgically Manufactured TNM (TM) Titanium Aluminide Alloy Using Complimentary Quantitative Methods
M. Schloffer et al.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY (2011)
Grain refinement by low boron additions in niobium-rich TiAl-based alloys
U. Hecht et al.
INTERMETALLICS (2008)
Alloy design concepts for refined gamma titanium aluminide based alloys
R. M. Imayev et al.
INTERMETALLICS (2007)
Crack opening due to deformation twin shear at grain boundaries in near-gamma TiAl
B. A. Simkin et al.
INTERMETALLICS (2007)
Fatigue tests of un-HIP'ed γ-TiAl engine valves for motorcycles
M Badami et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Performance, tolerance and cost of TiAl passenger car valves
K Gebauer
INTERMETALLICS (2006)
Phase transformations in high niobium and carbon containing gamma-TiAl based alloys
H. F. Chladil et al.
INTERMETALLICS (2006)
Fracture tests of microsized TiAl specimens
TP Halford et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
The role of mechanical twinning on microcrack nucleation and crack propagation in a near-γ TiAl alloy
BC Ng et al.
INTERMETALLICS (2004)
A newly developed hot worked TiAl alloy for blades and structural components
T Tetsui et al.
SCRIPTA MATERIALIA (2002)
Effect of boron addition on tensile ductility in lamellar TiAl alloys
D Hu
INTERMETALLICS (2002)
Fatigue threshold and crack propagation in gamma-TiAl sheets
R Pippan et al.
INTERMETALLICS (2001)
On two stages of brittle-to-ductile transition in TiAl intermetallic
VM Imayev et al.
INTERMETALLICS (2000)
Share Paper
