Related references
Note: Only part of the references are listed.A digital workflow for learning the reduced-order structure-property linkages for permeability of porous membranes
Yuksel C. Yabansu et al.
ACTA MATERIALIA (2020)
High-Throughput Exploration of the Process Space in 18% Ni (350) Maraging Steels via Spherical Indentation Stress-Strain Protocols and Gaussian Process Models
Sepideh Parvinian et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2020)
Mechanical properties and microstructure of Ti-Mn alloys produced via powder metallurgy for biomedical applications
Y. Alshammari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Data-Driven Design Space Exploration and Exploitation for Design for Additive Manufacturing
Yi Xiong et al.
JOURNAL OF MECHANICAL DESIGN (2019)
Application of Gaussian process regression models for capturing the evolution of microstructure statistics in aging of nickel-based superalloys
Yuksel C. Yabansu et al.
ACTA MATERIALIA (2019)
Bayesian Sequential Design of Experiments for Extraction of Single-Crystal Material Properties from Spherical Indentation Measurements on Polycrystalline Samples
Andrew R. Castillo et al.
JOM (2019)
Application of Gaussian process autoregressive models for capturing the time evolution of microstructure statistics from phase-field simulations for sintering of polycrystalline ceramics
Yuksel C. Yabansu et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
An efficient machine learning approach to establish structure-property linkages
Jaimyun Jung et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
A Comparative Study of the Efficacy of Local/Global and Parametric/Nonparametric Machine Learning Methods for Establishing Structure-Property Linkages in High-Contrast 3D Elastic Composites
Patxi Fernandez-Zelaia et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2019)
Process-Structure-Property Modeling for Severe Plastic Deformation Processes Using Orientation Imaging Microscopy and Data-Driven Techniques
Patxi Fernandez-Zelaia et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2019)
Compatibility in microstructural optimization for additive manufacturing
Eric Garner et al.
ADDITIVE MANUFACTURING (2019)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
Design of graded lattice structure with optimized mesostructures for additive manufacturing
Yiqiang Wang et al.
MATERIALS & DESIGN (2018)
Application of chord length distributions and principal component analysis for quantification and representation of diverse polycrystalline microstructures
Marat I. Latypov et al.
MATERIALS CHARACTERIZATION (2018)
Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment
Grace X. Gu et al.
MATERIALS HORIZONS (2018)
Control of Porosity in Parts Produced by a Direct Laser Melting Process
Tae Jun Jeon et al.
APPLIED SCIENCES-BASEL (2018)
Autonomous efficient experiment design for materials discovery with Bayesian model averaging
Anjana Talapatra et al.
PHYSICAL REVIEW MATERIALS (2018)
Direct fabrication of compositionally graded Ti-Al2O3 multi-material structures using Laser Engineered Net Shaping
Yanning Zhang et al.
ADDITIVE MANUFACTURING (2018)
Uncertainty quantification and management in additive manufacturing: current status, needs, and opportunities
Zhen Hu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
High-throughput stochastic tensile performance of additively manufactured stainless steel
Bradley C. Salzbrenner et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
Christian Haase et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes
Hooyar Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Additive manufacturing: Toward holistic design
Bradley H. Jared et al.
SCRIPTA MATERIALIA (2017)
A Multiscale Understanding of the Thermodynamic and Kinetic Mechanisms of Laser Additive Manufacturing
Dongdong Gu et al.
ENGINEERING (2017)
Inferring low-dimensional microstructure representations using convolutional neural networks
Nicholas Lubbers et al.
PHYSICAL REVIEW E (2017)
Feasibility Exploration of Superalloys for AISI 4140 Steel Repairing Using Laser Engineered Net Shaping
Zhichao Liu et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Mohsen Attaran
BUSINESS HORIZONS (2017)
High Throughput Assays for Additively Manufactured Ti-Ni Alloys Based on Compositional Gradients and Spherical Indentation
X. Gong et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2017)
Mass customization with additive manufacturing: new perspectives for multi performative building components in architecture
Ingrid Paoletti
INTERNATIONAL HIGH-PERFORMANCE BUILT ENVIRONMENT CONFERENCE - A SUSTAINABLE BUILT ENVIRONMENT CONFERENCE 2016 SERIES (SBE16), IHBE 2016 (2017)
Modeling of additive manufacturing processes for metals: Challenges and opportunities
M. M. Francois et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Development of high throughput assays for establishing process-structure-property linkages in multiphase polycrystalline metals: Application to dual-phase steels
Ali Khosravani et al.
ACTA MATERIALIA (2017)
On capturing the grain-scale elastic and plastic anisotropy of alpha-Ti with spherical nanoindentation and electron back-scattered diffraction
Jordan S. Weaver et al.
ACTA MATERIALIA (2016)
Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models
Dipen K. Patel et al.
ACTA MATERIALIA (2016)
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
Matthias Markl et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Improvement in mechanical strength of low-cost β-type Ti-Mn alloys fabricated by metal injection molding through cold rolling
Ken Cho et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
A multiscale modeling approach for fast prediction of part distortion in selective laser melting
C. Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Fabrication of low-cost beta-type Ti-Mn alloys for biomedical applications by metal injection molding process and their mechanical properties
Pedro Fernandes Santos et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Efficient computation of the angularly resolved chord length distributions and lineal path functions in large microstructure datasets
David M. Turner et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)
Investigations of orientation and length scale effects on micromechanical responses in polycrystalline zirconium using spherical nanoindentation
Siddhartha Pathak et al.
SCRIPTA MATERIALIA (2016)
Direct Metal Additive Manufacturing Processes and Their Sustainable Applications for Green Technology: A Review
Dong-Gyu Ahn
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Mechanical characterization of Ti-6Al-4V titanium alloy at multiple length scales using spherical indentation stress-strain measurements
Jordan S. Weaver et al.
MATERIALS & DESIGN (2016)
High throughput exploration of process-property linkages in Al-6061 using instrumented spherical microindentation and microstructurally graded samples
Jordan S. Weaver et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
Microstructures, mechanical properties and cytotoxicity of low cost beta Ti-Mn alloys for biomedical applications
Pedro Fernandes Santos et al.
ACTA BIOMATERIALIA (2015)
Spherical nanoindentation stress-strain curves
Siddhartha Pathak et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)
Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys
Jithin Joseph et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
An overview overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
Nima Shamsaei et al.
ADDITIVE MANUFACTURING (2015)
Extracting single-crystal elastic constants from polycrystalline samples using spherical nanoindentation and orientation measurements
Dipen K. Patel et al.
ACTA MATERIALIA (2014)
Functionally Graded Alloys Obtained by Additive Manufacturing
Thomas Niendorf et al.
ADVANCED ENGINEERING MATERIALS (2014)
Additive Manufacturing: Making Imagination the Major Limitation
Yuwei Zhai et al.
JOM (2014)
Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis
J. Michael Wilson et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Laser Engineered Net Shape (LENS) Technology for the Repair of Ni-Base Superalloy Turbine Components
Dejian Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Douglas C. Hofmann et al.
SCIENTIFIC REPORTS (2014)
Challenges and Opportunities in Design for Additive Manufacturing
Carolyn Conner Seepersad
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentation
S. J. Vachhani et al.
ACTA MATERIALIA (2013)
Combinatorial synthesis of alloy libraries with a progressive composition gradient using laser engineered net shaping (LENS): Hydrogen storage alloys
M. Polanski et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Multi-output separable Gaussian process: Towards an efficient, fully Bayesian paradigm for uncertainty quantification
Ilias Bilionis et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2013)
Multiple material additive manufacturing - Part 1: a review This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Response surface methodology with prediction uncertainty: A multi-objective optimisation approach
Guoyi Chi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)
Novel precipitate-microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting
D. A. Ramirez et al.
ACTA MATERIALIA (2011)
Preparation, microstructures, mechanical properties, and cytocompatibility of TiMn alloys for biomedical applications
Faming Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
Mechanical properties of low modulus β titanium alloys designed from the electronic approach
P. Laheurte et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2010)
Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS)
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2009)
Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy
Siddhartha Pathak et al.
ACTA MATERIALIA (2009)
Importance of surface preparation on the nano-indentation stress-strain curves measured in metals
Siddhartha Pathak et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants
Amit Bandyopadhyay et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
Potential of Laser Engineered Net Shaping (LENS) Technology
I. Palcic et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Evaluation of multilayer perceptron and self-organizing map neural network topologies applied on microstructure segmentation from metallographic images
Victor Hugo C. de Albuquerque et al.
NDT & E INTERNATIONAL (2009)
Determination of the effective zero-point and the extraction of spherical nanoindentation stress-strain curves
Surya R. Kalidindi et al.
ACTA MATERIALIA (2008)
Prediction of flow stress in Ti-6Al-4V alloy with an equiaxed α plus β microstructure by artificial neural networks
N. S. Reddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Compositionally graded yttria-stabilized zirconia coating on stainless steel using laser engineered net shaping (LENS™)
Vainsi Krishna Balla et al.
SCRIPTA MATERIALIA (2007)
Compositionally graded aluminum oxide coatings on stainless steel using laser processing
Partha P. Bandyopadhyay et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping
Leijun Li
JOURNAL OF MATERIALS SCIENCE (2006)
Precipitation of grain boundary α in a laser deposited compositionally graded Ti-8Al-xV alloy -: an orientation microscopy study
R Banerjee et al.
ACTA MATERIALIA (2004)
Survey over image thresholding techniques and quantitative performance evaluation
M Sezgin et al.
JOURNAL OF ELECTRONIC IMAGING (2004)
Laser deposition of compositionally graded titanium-vanadium and titanium-molybdenum alloys
PC Collins et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Microstructural evolution in laser deposited compositionally graded α/β titanium-vanadium alloys
R Banerjee et al.
ACTA MATERIALIA (2003)
Relationship between hydrogen sorption properties and crystallography for TiMn2 based alloys
JL Bobet et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2000)
Share Paper
