Related references
Note: Only part of the references are listed.Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency
Rongfeng Tang et al.
NATURE ENERGY (2020)
Perovskite Quantum Dots Exhibiting Strong Hole Extraction Capability for Efficient Inorganic Thin Film Solar Cells
Chenhui Jiang et al.
CELL REPORTS PHYSICAL SCIENCE (2020)
Ultrafast self-trapping of photoexcited carriers sets the upper limit on antimony trisulfide photovoltaic devices
Zhaoliang Yang et al.
NATURE COMMUNICATIONS (2019)
Interfacial Engineering by Indium-Doped CdS for High Efficiency Solution Processed Sb2(S1-xSex)3 Solar Cells
Chunyan Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film
Rong Tang et al.
NANO ENERGY (2019)
9.2%-efficient core-shell structured antimony selenide nanorod array solar cells
Zhiqiang Li et al.
NATURE COMMUNICATIONS (2019)
Over 6% Certified Sb2(S,Se)3 Solar Cells Fabricated via In Situ Hydrothermal Growth and Postselenization
Weihuang Wang et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Review of Recent Progress in Antimony Chalcogenide-Based Solar Cells: Materials and Devices
Hongwei Lei et al.
SOLAR RRL (2019)
Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Lei Yan et al.
ADVANCED MATERIALS (2018)
Influence of the electron buffer layer on the photovoltaic performance of planar Sb-2(SxSe1-x)(3) solar cells
Oscar Andres Jaramillo-Quintero et al.
PROGRESS IN PHOTOVOLTAICS (2018)
Direct solution deposition of device quality Sb2S3-xSex films for high efficiency solar cells
Chunyan Wu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Thermally induced structural evolution and performance of Sb2Se3 films and nanorods prepared by an easy sputtering method
Guang-Xing Liang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency
Xixing Wen et al.
NATURE COMMUNICATIONS (2018)
Understanding the Doping Effect on NiO: Toward High-Performance Inverted Perovskite Solar Cells
Wei Chen et al.
ADVANCED ENERGY MATERIALS (2018)
Development of antimony sulfide-selenide Sb2(S, Se)3-based solar cells
Xiaomin Wang et al.
JOURNAL OF ENERGY CHEMISTRY (2018)
In situ sulfurization to generate Sb2(Se1-xSx)3 alloyed films and their application for photovoltaics
Bo Yang et al.
PROGRESS IN PHOTOVOLTAICS (2017)
Efficient and Highly Air Stable Planar Inverted Perovskite Solar Cells with Reduced Graphene Oxide Doped PCBM Electron Transporting Layer
George Kakavelakis et al.
ADVANCED ENERGY MATERIALS (2017)
Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization
Zhiqiang Li et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Postsurface Selenization for High Performance Sb2S3 Planar Thin Film Solar Cells
Shengjie Yuan et al.
ACS PHOTONICS (2017)
Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer
Liang Wang et al.
NATURE ENERGY (2017)
Selenium-Graded Sb2(S1-xSex)3 for Planar Heterojunction Solar Cell Delivering a Certified Power Conversion Efficiency of 5.71%
Yan Zhang et al.
SOLAR RRL (2017)
Pinhole-Free and Surface-Nanostructured NiOx Film by Room-Temperature Solution Process for High-Performance Flexible Perovskite Solar Cells with Good Stability and Reproducibility
Hong Zhang et al.
ACS NANO (2016)
Identifying Fundamental Limitations in Halide Perovskite Solar Cells
Wei Lin Leong et al.
ADVANCED MATERIALS (2016)
Efficiency enhancement of Sb2Se3 thin-film solar cells by the co-evaporation of Se and Sb2Se3
Zhiqiang Li et al.
APPLIED PHYSICS EXPRESS (2016)
A green and facile hydrothermal approach for the synthesis of high-quality semi-conducting Sb2S3 thin films
Meng Liu et al.
APPLIED SURFACE SCIENCE (2016)
Open circuit voltage of organic solar cells: an in-depth review
Naveen Kumar Elumalai et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Efficiency Enhancement of Inverted Structure Perovskite Solar Cells via Oleamide Doping of PCBM Electron Transport Layer
Fei Xia et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Solution-Phase Conversion of Bulk Metal Oxides to Metal Chalcogenides Using a Simple Thiol-Amine Solvent Mixture
Carrie L. McCarthy et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
High-Performance Semitransparent Perovskite Solar Cells with 10% Power Conversion Efficiency and 25% Average Visible Transmittance Based on Transparent CuSCN as the Hole-Transporting Material
Jae Woong Jung et al.
ADVANCED ENERGY MATERIALS (2015)
Hydrazine solution processed Sb2S3, Sb2Se3 and Sb2(S1-xSex)3 film: molecular precursor identification, film fabrication and band gap tuning
Bo Yang et al.
SCIENTIFIC REPORTS (2015)
Enhanced photovoltaic performance in TiO2/P3HT hybrid solar cell by interface modification
Wang Duofa et al.
JOURNAL OF SEMICONDUCTORS (2015)
Highly Improved Sb2S3 Sensitized-Inorganic-Organic Heterojunction Solar Cells and Quantification of Traps by Deep-Level Transient Spectroscopy
Yong Chan Choi et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Efficient Inorganic-Organic Heterojunction Solar Cells Employing Sb2(Sx/Se1-x)3 Graded-Composition Sensitizers
Yong Chan Choi et al.
ADVANCED ENERGY MATERIALS (2014)
Compositional dependence of the optical properties of amorphous Sb2Se3-xSx thin films
E. A. El-Sayad
JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)
Space-charge limited photocurrent
VD Mihailetchi et al.
PHYSICAL REVIEW LETTERS (2005)
Heterogeneous nucleation or homogeneous nucleation?
XY Liu
JOURNAL OF CHEMICAL PHYSICS (2000)
Share Paper
