Related references
Note: Only part of the references are listed.Highly-aligned cellulose fibers reinforced epoxy composites derived from bulk natural bamboo
Ehsan Naderi Kalali et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Chemical treatments of flax fibers - Control of the diffusion of molecules into the fiber structure
Sana Ben Abdallah et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis. L
P. Senthamaraikannan et al.
CARBOHYDRATE POLYMERS (2018)
Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications
P. Manimaran et al.
CARBOHYDRATE POLYMERS (2018)
Extraction and investigation of lightweight and porous natural fiber from Conium maculatum as a potential reinforcement for composite materials in transportation
Ahmet Cagri Kilinc et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of fiber surface treatment on structure, moisture absorption and mechanical properties of luffa sponge fiber bundles
Yuxia Chen et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
A recyclability study of bagasse fiber reinforced polypropylene composites
Manish Kumar Lila et al.
POLYMER DEGRADATION AND STABILITY (2018)
Effect of Fiber Type on Thermal and Mechanical Behavior of Epoxy Based Composites
Manish Kumar Lila et al.
FIBERS AND POLYMERS (2017)
Standard density measurement method development for flax fiber
Ali Amiri et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Characterization of a novel natural cellulosic fiber from Juncus effusus L.
Mabrouk Maache et al.
CARBOHYDRATE POLYMERS (2017)
Extraction, modification, and characterization of natural ligno-cellulosic fiber strands from napier grass
V. P. Kommula et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)
Quantitative surface analysis of hemp fibers using XPS, conventional and low voltage in-lens SEM
Rowan W. Truss et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Characterization of Adhesion Surface of Cellulosic Fibers Extracted from Agro Wastes
Emmanuel I. Akpan et al.
JOURNAL OF NATURAL FIBERS (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Production of cellulose nanofibrils: A review of recent advances
Oleksandr Nechyporchuk et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
Characterization of new natural cellulosic fiber from Lygeum spartum L.
Z. Belouadah et al.
CARBOHYDRATE POLYMERS (2015)
Tensile mechanical properties and surface chemical sensitivity of technical fibres from date palm fruit branches (Phoenix dactylifera L.)
Salah Amroune et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Effect of alkali and acid treatment on thermal degradation kinetics of sugar cane bagasse
T. E. Motaung et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Synthesis and Characterization of Cellulose from Green Bamboo by Chemical Treatment with Mechanical Process
Fui Kiew Liew et al.
JOURNAL OF CHEMISTRY (2015)
Characterization of new natural cellulosic fiber from Cissus quadrangularis root
S. Indran et al.
CARBOHYDRATE POLYMERS (2014)
Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites
V. Fiore et al.
CARBOHYDRATE POLYMERS (2014)
Thermochemical and statistical mechanical properties of natural sisal fibres
Ahmed Belaadi et al.
COMPOSITES PART B-ENGINEERING (2014)
Surface and thermal characterization of natural fibres treated with enzymes
Michael George et al.
INDUSTRIAL CROPS AND PRODUCTS (2014)
Influence of Layer-by-Layer Polyelectrolyte Deposition and EDC/NHS Activated Heparin Immobilization onto Silk Fibroin Fabric
M. Fazley Elahi et al.
MATERIALS (2014)
Estimation and inference in sets of Weibull samples
John I. McCool
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY (2014)
Characterisation of Cassava Bagasse and Composites Prepared by Blending with Low-Density Polyethylene
Fabiane Oliveira Farias et al.
BRAZILIAN ARCHIVES OF BIOLOGY AND TECHNOLOGY (2014)
Characterization of a novel natural cellulosic fiber from Prosopis juliflora bark
S. S. Saravanakumar et al.
CARBOHYDRATE POLYMERS (2013)
Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials
Yoldas Seki et al.
COMPOSITES PART B-ENGINEERING (2013)
Structural and thermal characterization of Moroccan sugar cane bagasse cellulose fibers and their applications as a reinforcing agent in low density polyethylene
Amine Moubarik et al.
COMPOSITES PART B-ENGINEERING (2013)
Banana Fiber-Reinforced Polypropylene Composites: A Study of the Physico-Mechanical Properties
Haydar U. Zaman et al.
FIBERS AND POLYMERS (2013)
The effects of fiber's surface roughness on the mechanical properties of fiber-reinforced polymer composites
Yin Yao et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
A review on the degradability of polymeric composites based on natural fibres
Z. N. Azwa et al.
MATERIALS & DESIGN (2013)
Tribological behavior of natural fiber reinforced PLA composites
Pramendra Kumar Bajpai et al.
WEAR (2013)
Green composites from sustainable cellulose nanofibrils: A review
H. P. S. Abdul Khalil et al.
CARBOHYDRATE POLYMERS (2012)
Naturally growing Saccharum munja L. on the fly ash lagoons: A potential ecological engineer for the revegetation and stabilization
Vimal Chandra Pandey et al.
ECOLOGICAL ENGINEERING (2012)
Comparative studies of mechanical and morphological properties of polylactic acid and polypropylene based natural fiber composites
Pramendra Kumar Bajpai et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
A modulated-TGA approach to the kinetics of lignocellulosic biomass pyrolysis/combustion
Kun Cheng et al.
POLYMER DEGRADATION AND STABILITY (2012)
MECHANICAL PROPERTIES AND THERMAL CONDUCTIVITY OF Typha angustifolia NATURAL FIBER-REINFORCED POLYESTER COMPOSITES
K. Ramanaiah et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2011)
Functionally diverse rhizobacteria of Saccharum munja (a native wild grass) colonizing abandoned morrum mine in Aravalli hills (Delhi)
Meenakshi Sharma et al.
PLANT AND SOIL (2011)
Cellulose whiskers extracted from mulberry: A novel biomass production
Rongji Li et al.
CARBOHYDRATE POLYMERS (2009)
Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites
Vincent Placet
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas
Nina Graupner et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil
J. L. Guimaraes et al.
INDUSTRIAL CROPS AND PRODUCTS (2009)
Thermal Decomposition of Natural Fibers: Global Kinetic Modeling with Nonisothermal Thermogravimetric Analysis
Fei Yao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Ramakrishna Malkapuram et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
A comparative study on natural fibre density measurement
M. Truong et al.
JOURNAL OF THE TEXTILE INSTITUTE (2009)
Physico-chemical and microstructural characterization of Rhectophyllum camerunense plant fiber
A. Beakou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Characterization of natural fiber surfaces and natural fiber composites
N. Sgriccia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Tensile behavior of high performance natural (sisal) fibers
Flavio de Andrade Silva et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
X-ray diffraction study of bamboo fibers treated with NaOH
Yanping Liu et al.
FIBERS AND POLYMERS (2008)
Overlaying properties of fiberboard manufactured from bamboo and rice straw
Salim Hiziroglu et al.
INDUSTRIAL CROPS AND PRODUCTS (2008)
Study of the tensile properties of stinging nettle fibres (Urtica dioica)
Edwin Bodros et al.
MATERIALS LETTERS (2008)
Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis
Fei Yao et al.
POLYMER DEGRADATION AND STABILITY (2008)
Preparation and characterization of long natural cellulose fibers from wheat straw
Narendra Reddy et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2007)
Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites
A. Bourmaud et al.
POLYMER DEGRADATION AND STABILITY (2007)
Surface characterisation of selected sorbent materials for common hydrocarbon fuels
Onuma Carmody et al.
SURFACE SCIENCE (2007)
Extraction and tensile properties of natural fibers: Vakka, date and bamboo
K. Murali Mohan Rao et al.
COMPOSITE STRUCTURES (2007)
Atomic force microscopy characterization of the surface wettability of natural fibres
Alexis Pietak et al.
APPLIED SURFACE SCIENCE (2007)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Mechanical behavior and microstructural analysis of sugarcane bagasse fibers reinforced polypropylene composites
S. M. Luz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Properties of high-quality long natural cellulose fibers from rice straw
Narendra Reddy et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2006)
On the determination of crystallinity and cellulose content in plant fibres
A Thygesen et al.
CELLULOSE (2005)
Surface chemical analysis of raw cotton fibres and associated materials
R Mitchell et al.
CELLULOSE (2005)
Thermoplastic nanocomposites based on cellulose microfibrils from Opuntia ficus-indica parenchyma cell
ME Malainine et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Unidirectional hemp and flax EP- and PP-composites: Influence of defined fiber treatments
AK Bledzki et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Natural fibres: can they replace glass in fibre reinforced plastics?
P Wambua et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior
A Bismarck et al.
POLYMER COMPOSITES (2002)
A review on interface modification and characterization of natural fiber reinforced plastic composites
J George et al.
POLYMER ENGINEERING AND SCIENCE (2001)
The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
MZ Rong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
The effect of alkali treatment on the adhesion characteristics of sisal fibres
ETN Bisanda
APPLIED COMPOSITE MATERIALS (2000)
Oil palm fibre reinforced phenol formaldehyde composites: Influence of fibre surface modifications on the mechanical performance
MS Sreekala et al.
APPLIED COMPOSITE MATERIALS (2000)
Share Paper
