Related references
Note: Only part of the references are listed.Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications
Xinlin Qing et al.
SENSORS (2019)
Parameters' monitoring and in-situ instrumentation for resin transfer moulding: A review
Mauricio Torres
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A novel dielectric sensor for process monitoring of carbon fibre composites manufacture
K. I. Tifkitsis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Cure strain monitoring in composite laminates with distributed optical sensor
Jung-Ting Tsai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
In-process acquisition of cure-dependent viscoelastic properties of carbon fiber reinforced composites using micromechanics-based guided wave analysis
Koichi Mizukami et al.
POLYMER TESTING (2018)
Mode I interlaminar fracture toughness of carbon-epoxy coupons with embedded ceramic sensors
Mauricio Torres et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring
Muhammad A. Ali et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Investigation of Electrical Time Domain Reflectometry for infusion and cure monitoring in combination with electrically conductive fibers and tooling materials
Christopher Buchmann et al.
COMPOSITES PART B-ENGINEERING (2016)
Process-induced strains in RTM processing of polyurethane/carbon composites
Luis P. Canal et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Unsaturated and Saturated Flow Front Tracking in Liquid Composite Molding Processes using Dielectric Sensors
P. Carlone et al.
APPLIED COMPOSITE MATERIALS (2015)
Design and fabrication of a helicopter unitized structure using resin transfer moulding
S. Laurenzi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Monitoring the production of FRP composites: A review of in-line sensing methods
S. Konstantopoulos et al.
EXPRESS POLYMER LETTERS (2014)
Microfabricated Expandable Sensor Networks for Intelligent Sensing Materials
Nathan Picchietti Salowitz et al.
IEEE SENSORS JOURNAL (2014)
Isothermal epoxy-cure monitoring using nonlinear ultrasonics
V. Koissin et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions
Damien Kinet et al.
SENSORS (2014)
Future structural stability design for composite space and airframe structures
Richard Degenhardt et al.
THIN-WALLED STRUCTURES (2014)
A methodology for flow-front estimation in LCM processes based on pressure sensors
Claudio Di Fratta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Review of structural health and cure monitoring techniques for large wind turbine blades
P. J. Schubel et al.
RENEWABLE ENERGY (2013)
Monitoring the Cure State of Thermosetting Resins by Ultrasound
Francesca Lionetto et al.
MATERIALS (2013)
Cure monitoring through time-frequency analysis of guided ultrasonic waves
S. Pavlopoulou et al.
PLASTICS RUBBER AND COMPOSITES (2012)
Enhancing Active Vibration Control Performances in a Smart Structure by Using Fiber Bragg Gratings Sensors
G. Cazzulani et al.
SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2012, PTS 1 AND 2 (2012)
Life cycle monitoring of large-scale CFRP VARTM structure by fiber-optic-based distributed sensing
Shu Minakuchi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review
Chung Hae Park et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Bragg Grating Inscription in GeO2-Doped Microstructured Optical Fibers
Thomas Geernaert et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2010)
A grid of dielectric sensors to monitor mold filling and resin cure in resin transfer molding
Bekir Yenilmez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Structural health monitoring using fiber optic distributed sensors for vacuum-assisted resin transfer molding
S. H. Eum et al.
SMART MATERIALS & STRUCTURES (2007)
Gelation of waxy crude oils by ultrasonic and dynamic mechanical analysis
Francesca Lionetto et al.
RHEOLOGICA ACTA (2007)
Wave propagation along transversely periodic structures
Mihai V. Predoi et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2007)
Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors
Murat Danisman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Built-in sensor network for structural health monitoring of composite structure
Xinlin P. Qing et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2007)
Constraints on monitoring resin flow in the resin transfer molding (RTM) process by using thermocouple sensors
Goker Tuncol et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Correlation of void distribution to VARTM manufacturing techniques
Nina Kuentzer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Leaky Lamb wave of a piezoelectric plate subjected to conductive fluid loading: Theoretical analysis and numerical calculation
Yung-Chun Lee et al.
JOURNAL OF APPLIED PHYSICS (2006)
Advances in the development of built-in diagnostic system for filament wound composite structures
Xinlin P. Qing et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Advanced numerical simulation of liquid composite molding for process analysis and optimization
F Trochu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Application of ultrasonics for the process control of Resin Transfer Moulding (RTM)
E Schmachtenberg et al.
POLYMER TESTING (2005)
Design and fabrication of a smart layer module in composite laminated structures
SM Yang et al.
SMART MATERIALS & STRUCTURES (2005)
Phase transformations during the cure of unsaturated polyester resins
F Lionetto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Linear direct current sensing system for flow monitoring in Liquid Composite Moulding
T Luthy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
The manufacture of composite structures with a built-in network of piezoceramics
M Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
A dielectric sensor for measuring flow in resin transfer moulding
AA Skordos et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2000)
Numerical simulation of the mould-filling process in resin-transfer moulding
YC Lam et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Share Paper
