Related references
Note: Only part of the references are listed.Structural, electrical, thermal, and gas sensing properties of new conductive blend nanocomposites based on polypyrrole/phenothiazine/silver-doped zinc oxide
M. T. Ramesan et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2020)
Dielectric properties of (Yb0.5Ta 0.5)xTi1-xO2 ceramics with colossal permittivity and low dielectric loss
Lei Jiao et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Hybrid Rubber Nanocomposites Based on XNBR/EPDM: Select the Best Dispersion Type from Different Nanofillers in the Presence of a Compatibilizer
Mohammad Javad Azizli et al.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)
Development of novel elastomeric blends derived from chlorinated nitrile rubber and chlorinated ethylene propylene diene rubber
A. Nihmath et al.
POLYMER TESTING (2020)
The dimensional effect of MgTiO3 ceramic filler on the microwave dielectric properties of PTFE/MgTiO3 composite with ultra-low dielectric loss
Haiyi Peng et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Influence of titanium dioxide nanoparticles on the structural, thermal, electrical properties, and gas sensing behavior of polyaniline/phenothiazine blend nanocomposites
B. K. Bahuleyan et al.
POLYMER COMPOSITES (2019)
Agar and egg shell derived calcium carbonate and calcium hydroxide nanoparticles: Synthesis, characterization and applications
Shanza Rauf Khan et al.
CHEMICAL PHYSICS LETTERS (2019)
Influence of POSS fillers on the transport properties of natural rubber nanocomposites
S. Lakshmipriya et al.
POLYMER COMPOSITES (2019)
Temperature dependence of the electrical conductivity of poly(Anthranilic acid)/magnetite nanocomposites and the applicability of different conductivity models
P. Jayakrishnan et al.
POLYMER COMPOSITES (2018)
Preparation, characterization, thermal, and electrical properties of chlorinated ethylene propylene diene monomer/hydroxyapatite nanocomposites
A. Nihmath et al.
POLYMER COMPOSITES (2018)
Study on cytotoxicity and photocatalytic properties of different titania/hydroxyapatite nanocomposites prepared with a combination of sol-gel and precipitation methods
Motahare S. Mohseni-Salehi et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2018)
Chlorinated styrene butadiene rubber/ zinc sulfide: novel nanocomposites with unique properties- structural, flame retardant, transport and dielectric properties
V. C. Jasna et al.
JOURNAL OF POLYMER RESEARCH (2018)
Evaluation of Spectral, Thermal, Flame Retardant, Dielectric, Solvent Diffusion, and Transport Behavior of Novel Nanocomposite Derived from Chlorinated Styrene Butadiene Rubber and Manganous Tungstate
V. C. Jasna et al.
POLYMER COMPOSITES (2018)
Synthesis, characterization, processability, mechanical properties, flame retardant, and oil resistance of chlorinated acrylonitrile butadiene rubber
A. Nihmath et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2018)
Preparation of facile separable homogeneous Rhodium catalyst and its application for the catalytic hydrogenation of nitrile butadiene rubber and styrene-butadiene rubber
Wei Zhou et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2017)
Fabrication, Characterization and Dielectric Studies of NBR/Hydroxyapatite Nanocomposites
A. Nihmath et al.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2017)
Morphologically controlled synthesis of ferric oxide nano/micro particles and their catalytic application in dry and wet media: a new approach
Muhammad Ramzan Saeed Ashraf Janjua et al.
CHEMISTRY CENTRAL JOURNAL (2017)
The Influence of Blend Ratio on the Morphology, Mechanical, Thermal, and Rheological Properties of PP/LDPE Blends
Tladi Gideon Mofokeng et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2016)
The fabrication and properties of natural rubber-clay nanocomposites
Soney C. George et al.
POLYMER TESTING (2016)
Molecular transport behaviour of organic solvents through halloysite nanotubes filled ethylene-vinyl acetate copolymer
Suvendu Padhi et al.
BULLETIN OF MATERIALS SCIENCE (2015)
Transport characteristics of organic solvents through carbon nanotube filled styrene butadiene rubber nanocomposites: the influence of rubber-filler interaction, the degree of reinforcement and morphology
Jiji Abraham et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)
Exfoliated polypyrrole/montmorillonite nanocomposite with flake-like structure for Cr(VI) removal from aqueous solution
Jun Chen et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2015)
The modification of bitumen with reactive ethylene terpolymer, styrene butadiene styrene and variable amounts of ethylene vinyl acetate
S. Keyf
RESEARCH ON CHEMICAL INTERMEDIATES (2015)
Morphology and properties of poly(lactic acid-co-glycolic acid) film improved by blending with poly(γ-benzyl L-glutamate)
Guoquan Zhu et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2015)
Development of nanocomposites from polymer blends: Effect of organoclay on the morphology and mechanical properties
Tomas J. A. Melo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
White electroluminescence generated by a blend of bis(di-p-tolylamino)dihydroindenoindene and DCJTB
P. -Y. Shen et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2014)
Composites based on carbon black reinforced NBR/EPDM rubber blends
Vojislav Jovanovic et al.
COMPOSITES PART B-ENGINEERING (2013)
Development of kevlar-supported novel polypropylene membranes: Effect of the concentration of the nucleating agent on the properties and performance
Nadeem Iqbal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Preparation and characterization of natural rubber latex/modified montmorillonite clay nano-composite
Fayq Hsan Jabbar Al-Shemmari et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2013)
Electrochemical properties of PEO/PMMA blend-based polymer electrolytes using imidazolium salt-supported silica as a filler
Lyungyu Lee et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2013)
Flame-retardant polycarbonate/acrylonitrile-butadiene-styrene based on red phosphorus encapsulated by polysiloxane: Flame retardance, thermal stability, and water resistance
Rong-Kun Jian et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Conversion of Calcined Eggshells into Flower-Like Hydroxyapatite Agglomerates by Solvothermal Method Using Hydrogen Peroxide/N,N-Dimethylformamide Mixed Solvents
Songnan Li et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Cure Characteristics, Swelling Behaviors, and Mechanical Properties of Carbon Black Filler Reinforced EPDM/NBR Blend System
K. C. Manoj et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effect of introduction of heterocyclic moieties into polymer backbone on gas transport properties of fluorinated poly(ether imide) membranes
Suman Kumar Sen et al.
JOURNAL OF MEMBRANE SCIENCE (2009)
Effect of plasma polymerization on the performance of silica in NBR, EPDM and NBR/EPDM blends
M. Tiwari et al.
RUBBER CHEMISTRY AND TECHNOLOGY (2008)
Radiation effect on properties of carbon black filled NBR/EPDM rubber blends
Magda M. Abou Zeid
EUROPEAN POLYMER JOURNAL (2007)
Properties of hydroxyapatite produced by annealing of bovine bone
C. Y. Ooi et al.
CERAMICS INTERNATIONAL (2007)
Diffusion of water and artificial seawater through coir fiber reinforced natural rubber composites
VG Geethamma et al.
POLYMER COMPOSITES (2005)
Preparation and characteristics of EPDM/NBR rubber blends with BIIR as compatibilizer
SH Botros et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2005)