4.6 Article

Influences of heat flux on extinction characteristics of steady/unsteady premixed stagnation flames

Journal

PROCEEDINGS OF THE COMBUSTION INSTITUTE
Volume 38, Issue 2, Pages 2305-2314

Publisher

ELSEVIER SCIENCE INC
DOI: 10.1016/j.proci.2020.06.316

Keywords

Extinction; Wall heat flux; Stretch rate; Low-frequency flow pulsation

Funding

  1. National Natural Science Foundation of China [91641204, 51725601]

Ask authors/readers for more resources

This study investigates the extinction characteristics of premixed stagnation flames (PSFs) under different conditions and the impact of flame stability by air flow pulsations. Through experiments and numerical simulations, it is revealed that wall heat flux and air pulsations have significant effects on the extinction stretch rate and flame stability in PSFs.
This paper investigates the extinction characteristics of premixed stagnation flames (PSFs) with controlled heat losses and flow disturbances. The low-frequency air flow pulsations that imitate the operational transients in practical combustors were specially introduced. The tunable diode-laser absorption spectroscopy (TDLAS) measurement was applied to obtain the temperature profile and wall heat flux. It is found that, for steady flame with a fixed equivalence ratio, the extinction stretch rate dramatically increases as the wall heat flux decreases. The extinction criterion is summarized as a global Karlovitz number of 0.57 by establishing a relationship between the global and local stretch rates. Numerical simulations reveal that the local extinction Karlovitz number of steady PSFs is approximately 1.0 regardless of the conditions such as heat flux and equivalence ratio. Further experiments present that the air pulsations with a repetition of similar to 5 Hz significantly deteriorate the flame stability. Particularly, for unsteady perturbed flames, the extinction stretch rate exhibits a nonlinear trend, yielding two regimes with discrepant sensitivities to wall heat flux. The unsteady simulation then highlights a local stretch rate overshoot in the presence of pulsation. It is caused by the time delay between the inlet velocity and flame front movement that eventually leads to poor flame stability. Moreover, in the high heat-flux regime, a smaller local stretch rate overshoot results in the weak dependence of extinction limits on heat fluxes. (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available