Related references
Note: Only part of the references are listed.Performance Evaluation of Mechanical Properties of Nanofiller Reinforced Jute-Kevlar Hybrid Composite
Sunil Manohar Maharana et al.
JOURNAL OF NATURAL FIBERS (2022)
Effect of chemical treatment and fumed silica coating on tensile and thermogravimetric properties of jute yarn
Sunil Manohar Maharana et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Applications of silica nanoparticles in glass/carbon fiber-reinforced epoxy nanocomposite
Sidharth Reddy Karnati et al.
COMPOSITES COMMUNICATIONS (2020)
Investigations on jute fibre-reinforced polyester composites: Effect of alkali treatment and poly(lactic acid) coating
M. K. Gupta
JOURNAL OF INDUSTRIAL TEXTILES (2020)
Surface functionalization of silica nanoparticles to enhance aging resistance of asphalt binder
Sidharth Reddy Karnati et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Enhancing Mode I and Mode II interlaminar fracture toughness of flax fibre reinforced epoxy composites with nano TiO2
Vishnu Prasad et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Investigation into Mode II interlaminar fracture toughness characteristics of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Mode I and Mode II interlaminar fracture behavior of E-glass fiber reinforced epoxy composites modified with reduced exfoliated graphite oxide
Lokasani Bhanuprakash et al.
POLYMER COMPOSITES (2018)
Interlaminar fracture toughness of hybrid woven carbon-Dyneema composites
Y. Zhao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Interlaminar fracture toughness of flax-epoxy composites
F. Bensadoun et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Characterization of carbon nanotube enhanced interlaminar fracture toughness of woven carbon fiber reinforced polymer composites
M. S. Chaudhry et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITE STRUCTURES (2017)
Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding
V. Fiore et al.
COMPOSITE STRUCTURES (2017)
The reversibility of Mode-I and -II interlaminar fracture toughness after hydrothermal aging of Carbon/Benzoxazine composites with a thermoplastic toughening interlayer
N. H. Nash et al.
COMPOSITE STRUCTURES (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric
Silvio Leonardo Valenca et al.
COMPOSITES PART B-ENGINEERING (2015)
Influence of graphene nanoplatelets on modes I, II and III interlaminar fracture toughness of fiber-reinforced polymer composites
B. Ahmadi-Moghadam et al.
ENGINEERING FRACTURE MECHANICS (2015)
Improving the fracture toughness and the strength of epoxy using nanomaterials - a review of the current status
N. Domun et al.
NANOSCALE (2015)
Improving mechanical properties of fiber-reinforced composites based on epoxy resins containing industrial surface-modified silica nanoparticles: review and outlook
Stephan Sprenger
JOURNAL OF COMPOSITE MATERIALS (2015)
A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties
Furqan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Characterization of Kevlar Fiber and Its Composites: A Review
Thingujam Jackson Singh et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Vijay Kumar Thakur et al.
CARBOHYDRATE POLYMERS (2014)
Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates
Shay Hamer et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
On the mechanical characterization of carbon nanotube reinforced epoxy adhesives
J. M. Wernik et al.
MATERIALS & DESIGN (2014)
Improving the fracture toughness and the cyclic-fatigue resistance of epoxy-polymer blends
A. J. Kinloch et al.
POLYMER (2014)
Nanoadsorbents: Classification, Preparation, and Applications (with Emphasis on Aqueous Media)
Mostafa Khajeh et al.
CHEMICAL REVIEWS (2013)
Simultaneously enhanced cryogenic tensile strength and fracture toughness of epoxy resins by carboxylic nitrile-butadiene nano-rubber
Yang Zhao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Developing plant fibre composites for structural applications by optimising composite parameters: a critical review
Darshil U. Shah
JOURNAL OF MATERIALS SCIENCE (2013)
Mode-I interlaminar fracture behaviour of nanoparticle modified epoxy/basalt fibre-reinforced laminates
Mohammad T. Bashar et al.
POLYMER TESTING (2013)
Critical review of recent publications on use of natural composites in infrastructure
David B. Dittenber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
A review on mechanical behavior of natural fiber based hybrid composites
Srinivas Nunna et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete
Ali Nazari et al.
COMPOSITES PART B-ENGINEERING (2011)
A review of bast fibres and their composites. Part 1-Fibres as reinforcements
John Summerscales et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Reinforcement efficiency of multi-walled carbon nanotube/epoxy nano composites
A. Martone et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam
M. M. Davoodi et al.
MATERIALS & DESIGN (2010)
Effects of Mode-I and Mode-II interlaminar fracture toughness on the energy absorption of CFRP twill/weave composite box sections
H. Hadavinia et al.
COMPOSITE STRUCTURES (2009)
Fracture behaviour of fumed silica/epoxy nanocomposites
M. Battistella et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
A status report on delamination resistance testing of polymer-matrix composites
A. J. Brunner et al.
ENGINEERING FRACTURE MECHANICS (2008)
Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites
A. Tugrul Seyhan et al.
ENGINEERING FRACTURE MECHANICS (2008)
Melt rheology of organoclay and fumed silica nanocomposites
Ph. Cassagnau
POLYMER (2008)
Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites
Mark Hughes et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Improvements in Mode I interlaminar fracture toughness and in-plane mechanical properties of stitched glass/polyester composites
R. Velmurugan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Development of flax fibre based textile reinforcements for composite applications
S. Goutianos et al.
APPLIED COMPOSITE MATERIALS (2006)
Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite
Yuanxin Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Designing of epoxy resin systems for cryogenic use
T Ueki et al.
CRYOGENICS (2005)
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
SS Ray et al.
POLYMER (2003)
Toughening epoxy adhesives to meet today's challenges
AJ Kinloch
MRS BULLETIN (2003)
Effect of alkali treated jute fibres on composite properties
D Ray et al.
BULLETIN OF MATERIALS SCIENCE (2001)
Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials
M Alexandre et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
Share Paper
