Related references
Note: Only part of the references are listed.Tribological properties of deflected NiTi superelastic archwire using a new experimental set-up: Stress-induced martensitic transformation effect
Ines Ben Naceur et al.
TRIBOLOGY INTERNATIONAL (2020)
Microstructural characterization and quantitative phase analysis of Ni-rich NiTi after stress assisted aging for long times using the Rietveld method
Hojjat Naji et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Effect of Ni content and Hf addition on the unlubricated wear performance of Ni-rich NiTi alloys
Fengxiang Zhang et al.
INTERMETALLICS (2019)
Fabrication of NiTi and NiTi-nano Al2O3 composites by powder metallurgy methods: Comparison of hot isostatic pressing and spark plasma sintering techniques
M. Farvizi et al.
CERAMICS INTERNATIONAL (2018)
Influence of stress aging process on variants of nano-Ni4Ti3 precipitates and martensitic transformation temperatures in NiTi shape memory alloy
A. Radi et al.
MATERIALS & DESIGN (2018)
Pin-on-Disc Study of Tribological Performance of Standard and Sintered Gear Materials Treated with Triboconditioning Process: Pretreatment by Pressure-Induced Tribofilm Formation
Xinmin Li et al.
TRIBOLOGY TRANSACTIONS (2017)
Fabrication and characterization of titanium-nickel-zirconia matrix composites prepared by spark plasma sintering
Babatunde Abiodun Obadele et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Photostress analysis of stress-induced martensite phase transformation in superelastic NiTi
B. Katanehi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
CHALLENGES OF USING ELEMENTAL NICKEL AND TITANIUM POWDERS FOR THE FABRICATION OF MONOLITHIC NiTi PARTS
M. Farvizi
ARCHIVES OF METALLURGY AND MATERIALS (2017)
Effect of nano-hydroxyapatite reinforcement in mechanically alloyed NiTi composites for biomedical implant
Muhammad Akmal et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Effect of starting materials on the wear performance of NiTi-based composites
M. Farvizi et al.
WEAR (2015)
Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites
Liangfa Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructural characterization of HIP consolidated NiTi-nano Al2O3 composites
M. Farvizi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Thermo-mechanical Response and Damping Behavior of Shape Memory Alloy-MAX Phase Composites
Ankush Dilip Kothalkar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Tribocorrosion characteristics of laser deposited Ti-Ni-ZrO2 composite coatings on AISI 316 stainless steel
Babatunde A. Obadele et al.
TRIBOLOGY INTERNATIONAL (2014)
MECHANICAL-ACTIVATED PHASE FORMATION OF NiTi IN THE PRESENCE OF NANOPARTICLES
M. Farvizi et al.
NANO (2013)
Effect of nano Al2O3 addition on mechanical properties and wear behavior of NiTi intermetallic
M. Farvizi et al.
MATERIALS & DESIGN (2013)
Nano-sized SiC particle reinforced NiTi alloy matrix shape memory composite
H. J. Jiang et al.
MATERIALS LETTERS (2013)
Improving wear resistance of TiNi matrix composites reinforced by carbon nanotubes and in situ TiC
X. Feng et al.
SCRIPTA MATERIALIA (2011)
Biocompatibility and corrosion behavior of the shape memory NiTi alloy in the physiological environments simulated with body fluids for medical applications
Jafar Khalil-Allafi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
The Role of Reversible Martensitic Transformation in the Wear Process of TiNi Shape Memory Alloy
Zoheir N. Farhat et al.
TRIBOLOGY TRANSACTIONS (2010)
Phase formation of Ni-Ti via solid state reaction
Jamaluddin Laeng et al.
PHYSICA SCRIPTA (2007)
Effects of ZrW2O8 and tungsten additions on the temperature range in which a pseudoelastic TiNi alloy retains its maximum wear resistance
Iulian Radu et al.
WEAR (2007)
Thermal stresses in a macroscopic graphite particulates reinforced CuAlMn shape memory alloy studied by internal friction
QZ Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Physical metallurgy of Ti-Ni-based shape memory alloys
K Otsuka et al.
PROGRESS IN MATERIALS SCIENCE (2005)
The effect of two types of precipitates upon the structure of martensite in sputter-deposited Ti-Ni thin films
JX Zhang et al.
SMART MATERIALS AND STRUCTURES (2004)
Preliminary study of micro-scale abrasive wear of a NiTi shape memory alloy
V Imbeni et al.
WEAR (2003)
Structure of martensite in sputter-deposited Ti-Ni thin films containing Guinier-Preston zones
JX Zhang et al.
ACTA MATERIALIA (2001)
Wear and friction of a new wear-resistant material: TiNi-based composites
HZ Ye et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
New wear-resistant material: Nano-TiN/TiC/TiNi composite
YC Luo et al.
JOURNAL OF MATERIALS SCIENCE (2001)
On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour
A Leyland et al.
WEAR (2000)
Exploration of TiNi shape memory alloy for potential application in a new area: tribological engineering
DY Li
SMART MATERIALS & STRUCTURES (2000)
A phase mixture model of a particle reinforced composite with fine microstructure
HS Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
