Related references
Note: Only part of the references are listed.Electrochemical micro texturing on flat and curved surfaces: simulation and experiments
Divyansh Singh Patel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of pulse width in laser assisted texturing on moly-chrome films
V. Ezhilmaran et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Investigation on generation of laser assisted dimples on piston ring surface and influence of dimple parameters on friction
V. Ezhihnaran et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Effect of local laser surface texturing on tribological performance of injection cam
Zhengyang Kang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Tribological properties of dimple-textured titanium alloys under dry sliding contact
Ze Wu et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Tribological assessment of coated piston ring-cylinder liner contacts under bio-oil lubricated conditions
Yubin Peng et al.
TRIBOLOGY INTERNATIONAL (2017)
The effect of both surfaces textured on improvement of tribological properties of sliding elements
Slawomir Wos et al.
TRIBOLOGY INTERNATIONAL (2017)
Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material
J. C. Walker et al.
WEAR (2017)
Micro surface texturing of alumina ceramic with nanosecond laser
Dexin Li et al.
13TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (2017)
On design and tribological behaviour of laser textured surfaces
D. Bhaduri et al.
COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT (2017)
Nanosecond laser texturing of uniformly and non-uniformly wettable micro structured metal surfaces for enhanced boiling heat transfer
Matevz Zupancic et al.
APPLIED SURFACE SCIENCE (2017)
Surface texturing to control friction and wear for energy efficiency and sustainability
Pradeep L. Menezes
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Femto second laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation
Alexandre Cunha et al.
APPLIED SURFACE SCIENCE (2016)
Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review
A. Arslan et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)
Effects of surface texturing on the tribological behavior of piston rings under lubricated conditions
Yali Zhang et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2016)
Pulsed Nd3+:YAG Laser Assisted Micro-dimple Formation in Chromium Films under Different Ambient Conditions
V. Ezhilmaran et al.
JOURNAL OF LASER MICRO NANOENGINEERING (2016)
The effect of laser surface texturing on the tribological performance of different Sialon ceramic phases
Bhupendra Joshi et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Effect of EDM dimple geometry on friction reduction under boundary and mixed lubrication
K. W. Liew et al.
TRIBOLOGY INTERNATIONAL (2016)
Effect of surface texturing on cast iron reciprocating against steel under starved lubrication conditions: A parametric study
F. Saeidi et al.
WEAR (2016)
The effect of laser surface texturing on the tribological performance of different Sialon ceramic phases
Bhupendra Joshi et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film
Dongqing He et al.
TRIBOLOGY INTERNATIONAL (2015)
Laser surface texturing of gray cast iron for improving tribological behavior
Ravi Bathe et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)
Investigation on the application of YAG laser texturing technology to the cylinder wall of auto engine
Jian Zhan et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2014)
Efficiency of laser surface texturing in the reduction of friction under mixed lubrication
Daniel Braun et al.
TRIBOLOGY INTERNATIONAL (2014)
Friction and wear performance of laser peen textured surface under starved lubrication
Kangmei Li et al.
TRIBOLOGY INTERNATIONAL (2014)
Tribodynamic modeling of piston compression ring and cylinder liner conjunction in high-pressure zone of engine cycle
Prakash Chandra Mishra
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool
J. Xie et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Modelling the hydrodynamic support of cylinder bore and piston rings with laser textured surfaces
Eduardo Tomanik
TRIBOLOGY INTERNATIONAL (2013)
Femtosecond laser-induced periodic surface structures
J. Bonse et al.
JOURNAL OF LASER APPLICATIONS (2012)
Effectiveness and design of surface texturing for different lubrication regimes
B. Podgornik et al.
MECCANICA (2012)
Global energy consumption due to friction in passenger cars
Kenneth Holmberg et al.
TRIBOLOGY INTERNATIONAL (2012)
Performance of electrical discharge textured cutting tools
P. Koshy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Modify the friction between steel ball and PDMS disk under water lubrication by surface texturing
Jinfeng Li et al.
MECCANICA (2011)
Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding
M. H. Cho et al.
TRIBOLOGY INTERNATIONAL (2011)
Generating micro-dimples array on the hard chrome-coated surface by modified through mask electrochemical micromachining
Shuangqing Qian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Surface texturing by micro ECM for friction reduction
Jung Won Byun et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2010)
Advanced material processing with nano- and femto-second pulsed laser
Tsuneo Kurita et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions
Miki Nakano et al.
TRIBOLOGY LETTERS (2007)
Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions
H. L. Costa et al.
TRIBOLOGY INTERNATIONAL (2007)
Improving tribological performance of piston rings by partial surface texturing
Y Kligerman et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2005)
Experimental investigation of laser surface texturing for reciprocating automotive components
G Ryk et al.
TRIBOLOGY TRANSACTIONS (2002)
Friction-reducing surface-texturing in reciprocating automotive components
A Ronen et al.
TRIBOLOGY TRANSACTIONS (2001)