Related references
Note: Only part of the references are listed.Drilling of In-Line Compression Molded Jute / Polypropylene Composites
Sandhyarani Pailoor et al.
JOURNAL OF NATURAL FIBERS (2021)
Prediction and Analysis of Abrasive Water Jet Machining Performance on Hybrid Composite
S. Vigneshwaran et al.
JOURNAL OF TESTING AND EVALUATION (2020)
Polymer composite for antistatic application in aerospace
Ramdayal Yadav et al.
DEFENCE TECHNOLOGY (2020)
Cutting Performance of Luffa Cylindrica Fiber-Reinforced Composite by Abrasive Water Jet
G. Kalusuraman et al.
JOURNAL OF TESTING AND EVALUATION (2020)
Drilling Behavior of Flax/Poly(Lactic Acid) Bio-Composite Laminates: An Experimental Investigation
Amirhossein Lotfi et al.
JOURNAL OF NATURAL FIBERS (2020)
Prediction of surface roughness quality of green abrasive water jet machining: a soft computing approach
Jagadish et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Experimental study on drilling of jute fiber reinforced polymer composites
Hadi Rezghi Maleki et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Mechanical Property, Wear Characteristics, Machining and Moisture Absorption Studies on Vinyl Ester Composites - a Review
R. Deepak Joel Johnson et al.
SILICON (2019)
Review on effect machining parameters on performance of natural fibre-reinforced composites (NFRCs)
T. Rajmohan et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization
M. R. Sanjay et al.
CARBOHYDRATE POLYMERS (2019)
An experimental study on milling of natural fiber (jute)- reinforced polymer composites
Yahya H. Celik et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining
D. Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models
Aiman Akmal Abdul Nasir et al.
COMPOSITES PART B-ENGINEERING (2019)
Micromechanical modeling of the machining behavior of natural fiber-reinforced polymer composites
Faissal Chegdani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experimental investigation on drilling of natural flax fiber-reinforced composites
H. Rezghi Maleki et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Assay of Machining attributes in Drilling of Natural Hybrid Fiber Reinforced Polymer Composite
Jeswin Arputhabalan et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining
Irina M. M. Wong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Abrasive water jet machining of fiber-reinforced composite materials
S. Vigneshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
AWJ machinability performance of CS/UPR composites with the effect of chemical treatment
S. Kalirasu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Experimental analysis of drilling induced damage in biocomposites
Antonio Diaz-Alvarez et al.
TEXTILE RESEARCH JOURNAL (2018)
Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications
P. Manimaran et al.
CARBOHYDRATE POLYMERS (2018)
Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review
K. Senthilkumar et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite
R. Vinayagamoorthy et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
The challenges of natural fiber in manufacturing, material selection, and technology application: A review
Tabrej Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Investigations on drilling of hemp/glass hybrid composites
Kundan Patel et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Friction scale effect in drilling natural fiber composites
Faissal Chegdani et al.
TRIBOLOGY INTERNATIONAL (2018)
Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates
Mridusmita Roy Choudhury et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses
Hom Nath Dhakal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Polymer matrix-natural fiber composites: An overview
T. G. Yashas Gowda et al.
COGENT ENGINEERING (2018)
Study on Drilling Induced Delamination of Woven Kenaf Fiber Reinforced Epoxy Composite Using Carbide Drills
M. Suhaily et al.
2018 6TH INTERNATIONAL CONFERENCE ON NANO AND MATERIALS SCIENCE (ICNMS 2018) (2018)
Machinability Study on Milling Kenaf Fiber Reinforced Plastic Composite Materials using Design of Experiments
H. Azmi et al.
3RD INTERNATIONAL CONFERENCE ON SCIENCE, TECHNOLOGY, AND INTERDISCIPLINARY RESEARCH (IC-STAR) (2018)
Cutting force analysis on drilling parameters of sugarcane fibre reinforced polymer composite
K. Gokul et al.
2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018) (2018)
Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process
Jagadish et al.
CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018) (2018)
A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials
Meltem Altin Karatas et al.
DEFENCE TECHNOLOGY (2018)
On the Analysis of Force During Secondary Processing of Natural Fiber-Reinforced Composite Laminates
Kishore Debnath et al.
POLYMER COMPOSITES (2017)
Machinability of natural fiber reinforced composites: a review
Mahmoud M. A. Nassar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Hole making in natural fiber-reinforced polylactic acid laminates: An experimental investigation
Pramendra Kumar Bajpai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)
Parametric optimization studies on drilling of sandwich composites using the Box-Behnken design
R. Vinayagamoorthy
MATERIALS AND MANUFACTURING PROCESSES (2017)
Performance Evaluation of Abrasive Water Jet Machining on Banana Fiber Reinforced Polyester Composite
V. Arumuga Prabu et al.
JOURNAL OF NATURAL FIBERS (2017)
AWJM Performance of jute/polyester composite using MOORA and analytical models
S. Kalirasu et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Measurement and analysis of thrust force in drilling sisal-glass fiber reinforced polymer composites
M. Ramesh et al.
FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (2017)
Factor analysis of machining parameters of fiber-reinforced polymer composites based on finite element simulation with experimental investigation
Chongyang Gao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates
Sikiru Oluwarotimi Ismail et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Assessment of delamination in composite materials: A review
Jalumedi Babu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Abrasive Water Jet Machining and Mechanical Behavior of Banyan Tree Saw Dust Powder Loaded Polypropylene Green Composites
Narayanappa Ramesha et al.
POLYMER COMPOSITES (2016)
Investigations on Drilling of Bidirectional Cotton Polyester Composite
Vijaykumar Chaudhary et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Fabrication and Machining of Metal Matrix Composites: A Review
Preetkanwal Singh Bains et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Measurement and analysis of thrust force and torque in drilling of sisal fiber polymer composites filled with coconut shell powder
Sadayan Navaneethakrishnan et al.
INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2016)
Machining analysis of natural fibre reinforced composites using fuzzy logic
K. Balasubramanian et al.
AEROTECH VI - INNOVATION IN AEROSPACE ENGINEERING AND TECHNOLOGY (2016)
Machinablity of Hybrid Natural Fiber Composite with and without Filler as Reinforcement
S. P. Jani et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJM
S. Kalirasu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
The quality of MDF workpieces machined in CNC milling machine in cutting speeds, feedrate, and depth of cut
Priscila Roel De Deus et al.
MECCANICA (2015)
Experimental study of coated tools effects in dry cutting of natural fiber reinforced plastics
Faissal Chegdani et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics
F. Chegdani et al.
WEAR (2015)
A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties
Furqan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Optimization of Milling Process on Jute Polyester Composite using Taguchi based Grey Relational Analysis coupled with Principle Component Analysis
B. Ravi Sankar et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites
Kishore Debnath et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Machining of non-homogeneous composite material with natural fibers reinforcement and HDPE matrix
Zuzana Hutyrova et al.
PRECISION MACHINING VII (2014)
Hole quality evaluation of natural fiber composite using image analysis technique
N. Venkateshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Drilling behavior of sisal fiber-reinforced polypropylene composite laminates
Pramendra Kumar Bajpai et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Optimization of Machinability of Polyester/Modified Jute Fabric Composite Using Grey Relational Analysis (GRA)
Veerapuram Sridharan et al.
INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013) (2013)
Drilling Delamination Outcomes on Glass and Sisal Reinforced Plastics
Luis Miguel P. Durao et al.
ADVANCED MATERIALS FORUM VI, PTS 1 AND 2 (2013)
Critical review of recent publications on use of natural composites in infrastructure
David B. Dittenber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Critical factors on manufacturing processes of natural fibre composites
Mei-po Ho et al.
COMPOSITES PART B-ENGINEERING (2012)
A review on mechanical behavior of natural fiber based hybrid composites
Srinivas Nunna et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Abrasive Waterjet Machining of Fiber Reinforced Composites: A Review
D. K. Kalla et al.
4TH MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC 2011) (2012)
Drilling analysis of coir-fibre-reinforced polyester composites
S. Jayabal et al.
BULLETIN OF MATERIALS SCIENCE (2011)
Drilling of long fiber reinforced thermoplastics-Influence of the cutting edge on the machining results
Vikki Franke
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder-Mead and genetic algorithm methods
S. Jayabal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Surface roughness aspects in milling MDF (medium density fibreboard)
J. Paulo Davim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Preparation and properties of short natural fiber reinforced poly(lactic acid) composites
Yu Tao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Characterization of natural fiber surfaces and natural fiber composites
N. Sgriccia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
V. N. Gaitonde et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Micromechanism of polycrystalline cemented diamond tool wear during milling of wood-based materials
S Miklaszewski et al.
DIAMOND AND RELATED MATERIALS (2000)
Share Paper
