Related references
Note: Only part of the references are listed.The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE® fibre metal laminates
K. Giasin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Effect of dipped cryogenic approach on thrust force, temperature, tool wear and chip formation in drilling of AZ31 magnesium alloy
Ugur Koklu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Machining process of glass-fiber-reinforced polyamide 6.6 Composite: pathways to improve the drilling of recycled polymers
Harrison Lourenco Correa et al.
ENGINEERING RESEARCH EXPRESS (2020)
Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates
K. Giasin et al.
COMPOSITE STRUCTURES (2019)
Recent advances in drilling of carbon fiber-reinforced polymers for aerospace applications: a review
Muhammad Aamir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
CRYOGENIC DRILLING OF CARBON FIBER-REINFORCED COMPOSITE (CFRP)
Ugur Koklu et al.
SURFACE REVIEW AND LETTERS (2019)
Feasibility study of delamination in rotary ultrasonic-assisted drilling of glass fiber reinforced plastics
Mohammad Baraheni et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study
Sezer Morkavuk et al.
COMPOSITES PART B-ENGINEERING (2018)
The effect of drilling parameters, cooling technology, and fiber orientation on hole perpendicularity error in fiber metal laminates
K. Giasin
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
Necati Ucak et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review
Kishore Kumar Panchagnula et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)
3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis
Khaled Giasin et al.
APPLIED COMPOSITE MATERIALS (2017)
Rotary ultrasonic machining of woven CFRP composite in a cryogenic environment
S. Thirumalai Kumaran et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Surface integrity and fatigue behaviour of electric discharged machined and milled austenitic stainless steel
Mattias Lundberg et al.
MATERIALS CHARACTERIZATION (2017)
Impact of Cryogenic Condition and Drill Diameter on Drilling Performance of CFRP
Gultekin Basmaci et al.
APPLIED SCIENCES-BASEL (2017)
Technical, Economic and Environmental Review of the Lubrication/Cooling Systems used in Machining Processes
E. Benedicto et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Microstructural investigation of drilling induced damage in fibre metal laminates constituents
Khaled Giasin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study
Khaled Giasin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Evaluation of cryogenic cooling and minimum quantity lubrication effects on machining GLARE laminates using design of experiments
K. Giasin et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Evaluation of Workpiece Temperature during Drilling of GLARE Fiber Metal Laminates Using Infrared Techniques: Effect of Cutting Parameters, Fiber Orientation and Spray Mist Application
Khaled Giasin et al.
MATERIALS (2016)
The effects of minimum quantity lubrication and cryogenic liquid nitrogen cooling on drilled hole quality in GLARE fibre metal laminates
K. Giasin et al.
MATERIALS & DESIGN (2016)
Cryogenic Drilling of Ti-6Al-4V Alloy Under Liquid Nitrogen Cooling
L. Shakeel Ahmed et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
An experimental study on drilling of unidirectional GLARE fibre metal laminates
K. Giasin et al.
COMPOSITE STRUCTURES (2015)
Role of the surface quality on the mechanical behavior of CFRP bolted composite joints
M. Saleem et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Wear signature on hole defects as a function of cutting tool material for drilling 3D interlock composite
Nicolas Cadorin et al.
WEAR (2015)
Evaluation of drilling Al/SiC composites with cryogenically treated HSS drills
Ergun Ekici et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Drilling of CFRP, GFRP, glare type composites
Piotr Tyczynski et al.
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2014)
Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes
M. Saleem et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation
Vaibhav A. Phadnis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Measuring Delamination Severity of Glass Fiber-Reinforced Epoxy Composites During Drilling Process
V. A. Nagarajan et al.
EXPERIMENTAL TECHNIQUES (2013)
Drilling behavior of sisal fiber-reinforced polypropylene composite laminates
Pramendra Kumar Bajpai et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Applying ultrasonic vibration to decrease drilling-induced delamination in GFRP laminates
P. Mehbudi et al.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)
Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich
Redouane Zitoune et al.
COMPOSITES PART B-ENGINEERING (2012)
Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools
Ozden Isbilir et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Behaviour of composite plates with drilled and moulded hole under tensile load
R. Zitoune et al.
COMPOSITE STRUCTURES (2011)
Influence of drill geometry on thrust force in drilling GFRP composites
B. Latha et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Experimental investigation and optimisation in drilling of GFRP composites
K. Palanikumar
MEASUREMENT (2011)
Study of drilling of composite material and aluminium stack
Redouane Zitoune et al.
COMPOSITE STRUCTURES (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part I - Effect of machining parameters
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part II - Effect of drill wear
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite
E. Kilickap
EXPERT SYSTEMS WITH APPLICATIONS (2010)
Experimental investigations of damage analysis in drilling of woven glass fiber-reinforced plastic composites
Birhan Isik et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Investigation into the effect of drilling parameters on delamination in drilling GFRP
Erol Kilickap
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Modeling and Analysis of Delamination Factor and Surface Roughness in Drilling GFRP Composites
K. Palanikumar
MATERIALS AND MANUFACTURING PROCESSES (2010)
Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard
Judith Gisip et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Surface Roughness Parameters Evaluation in Machining GFRP Composites by PCD Tool using Digital Image Processing
P. M. M. S. Sarma et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Fuzzy Rule Based Modeling of Drilling Parameters for Delamination in Drilling GFRP Composites
B. Latha et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
A review of cryogenic cooling in machining processes
Yakup Yildiz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Influence of Drill Point Angle in High Speed Drilling of Glass Fiber Reinforced Plastics
K. Palanikumar et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study
I. Singh et al.
MATERIALS & DESIGN (2008)
Evaluation of Delamination in Drilling GFRP Composites
K. Palanikumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials
N. S. Mohan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Adhesion of glass/epoxy composites influenced by thermal and cryogenic environments
Bankim C. Ray
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Influence of tool material on dynamics of drilling of GFRP composites
S. Arul et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Drilling of uni-directional glass fiber reinforced plastic (UD-GFRP) composite laminates
I Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Effects of exit back-up on delamination in drilling composite materials using a saw drill and a core drill
CC Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials
CC Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Effects of thermal and cryogenic conditionings on mechanical behavior of thermally shocked glass fiber-epoxy composites
BC Ray
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2005)
An enhancement of the machining performance of GFRP by oscillatory assisted drilling
J Ramkumar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
Factors affecting the machinability of GFR/epoxy composites
I El-Sonbaty et al.
COMPOSITE STRUCTURES (2004)
Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
JP Davim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Workpiece damping and its effect on delamination damage in drilling thin composite laminates
E Capello
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Manufacturing of GLARE parts and structures
J Sinke
APPLIED COMPOSITE MATERIALS (2003)
Share Paper
