Related references
Note: Only part of the references are listed.Triboelectric-electromagnetic hybrid nanogenerator driven by wind for self-powered wireless transmission in Internet of Things and self-powered wind speed sensor
Xueming Fan et al.
NANO ENERGY (2020)
Novel phosphorus-containing imidazolium as hardener for epoxy resin aiming at controllable latent curing behavior and flame retardancy
Ying-Jun Xu et al.
COMPOSITES PART B-ENGINEERING (2020)
Adaptable Interlocking Macromolecular Networks with Homogeneous Architecture Made from Immiscible Single Networks
Wei Li Peng et al.
MACROMOLECULES (2020)
An effective surface modification of UHMWPE fiber for improving the interfacial adhesion of epoxy resin composites
Shicheng Wang et al.
POLYMER COMPOSITES (2020)
Low dielectric constant polyimide mixtures fabricated by polyimide matrix and polyimide microsphere fillers
Guorong Qiu et al.
POLYMER INTERNATIONAL (2020)
Massive Growth of Graphene Quartz Fiber as a Multifunctional Electrode
Guang Cui et al.
ACS NANO (2020)
Thermally Conductive and Insulating Epoxy Composites by Synchronously Incorporating Si-sol Functionalized Glass Fibers and Boron Nitride Fillers
Rui-Han Zhang et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2020)
Improving the Curing and Mechanical Properties of Short Carbon Fibers/Epoxy Composites by Grafting Nano ZIF-8 on Fibers
Yixing Zhan et al.
ADVANCED MATERIALS INTERFACES (2020)
Two Birds with One Stone: FeS2@C Yolk-Shell Composite for High-Performance Sodium-Ion Energy Storage and Electromagnetic Wave Absorption
Zengming Man et al.
NANO LETTERS (2020)
Ferroelectric Multilayer Nanocomposites with Polarization and Stress Concentration Structures for Enhanced Triboelectric Performances
Yoojeong Park et al.
ACS NANO (2020)
Towards novel high-performance bio-composites: Polybenzoxazine-based matrix reinforced with Manicaria saccifera fabrics
Jessica Ribeiro Oliveira et al.
COMPOSITES PART B-ENGINEERING (2020)
High performance epoxy composites prepared using recycled short carbon fiber with enhanced dispersibility and interfacial bonding through polydopamine surface-modification
Xianhua Huan et al.
COMPOSITES PART B-ENGINEERING (2020)
Delamination resistant composites by interleaving bio-based long-chain polyamide nanofibers through optimal control of fiber diameter and fiber morphology
Timo Meireman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Well-organized organosilane composites for adhesion enhancement of heterojunctions
Tzu-Jung Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Miniaturization of Dielectric Resonator Antenna by Using Artificial Magnetic Conductor Surface
Shahid Khan et al.
IEEE ACCESS (2020)
An Accurate Method for Designing, Characterizing, and Testing a Multi-Layer Radome for mm-Wave Applications
Zeeshan Qamar et al.
IEEE ACCESS (2020)
Surface modification of basalt fiber (BF) for improving compatibilities between BF and poly lactic acid (PLA) matrix
Shuqiang Liu et al.
COMPOSITE INTERFACES (2019)
High-temperature properties and interface evolution of silicon nitride fiber reinforced silica matrix wave-transparent composite materials
Xuejin Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Novel high-performance poly(benzoxazole-co-imide) resins with low dielectric constants and superior thermal stabilities derived from thermal rearrangement of ortho-hydroxy polyimide oligomers
Xiuting Li et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Fabrication and investigations of G-POSS/cyanate ester resin composites reinforced by silane-treated silica fibers
Wangchang Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Structural and dielectric properties of POSS reinforced polyimide nanocomposites
Hatice Birtane et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2019)
Resilient Si3N4 Nanobelt Aerogel as Fire-Resistant and Electromagnetic Wave-Transparent Thermal Insulator
Lei Su et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Bone Plate Composed of a Ternary Nanohydroxyapatite/Polyamide 66/Glass Fiber Composite: Biocompatibility In Vivo and Internal Fixation for Canine Femur Fractures
Bo Qiao et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings
Jalal Nasser et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Enhanced interphase between thermoplastic matrix and UHMWPE fiber sized with CNT-modified polydopamine coating
Logesh Shanmugam et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Semi-Interpenetrating Polymer Networks Based on Cyanate Ester and Highly Soluble Thermoplastic Polyimide
Jingfeng Liu et al.
POLYMERS (2019)
Adamantane-Modified Graphene Oxide for Cyanate Ester Resin Composites with Improved Properties
Zhicong Miao et al.
APPLIED SCIENCES-BASEL (2019)
A novel polyamide-type cyclophosphazene functionalized rGO/WS2 nanosheets for bismaleimide resin with enhanced mechanical and tribological properties
Zhengyan Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A Compact Minimally Invasive Antenna for OTA Testing
Zhaolong Qiao et al.
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2019)
Influence of corona discharge on the surface and thermal properties of aramid fabrics
Alicja Nejman et al.
PLASMA PROCESSES AND POLYMERS (2019)
Thermoplastic polyurethane/polytetrafluoroethylene/bridged dopo derivative composites: Flammability, thermal stability, and mechanical properties
Ying Zhou et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Study on the Relationships between Microscopic Cross-Linked Network Structure and Properties of Cyanate Ester Self-Reinforced Composites
Hongtao Cao et al.
POLYMERS (2019)
Influence of Surface Treatment on the Interfacial and Mechanical Properties of Short S-Glass Fiber-Reinforced Dental Composites
Kiho Cho et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Facile Interface Design Strategy for Improving the Uvioresistant and Self-Healing Properties of Poly(p-phenylene benzobisoxazole) Fibers
Long Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Preparation and Performance of Si3N4 Hollow Microspheres by the Template Method and Carbothermal Reduction Nitridation
Kai Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Design of bi-modal pore structure polyarylene ether nitrile/SiO2 foams with ultralow-k dielectric and wave transparent properties by supercritical carbon dioxide
Qing Qi et al.
COMPOSITES PART B-ENGINEERING (2019)
An Overview of Radomes for Large Ground-Based Antennas
Michael E. MacDonald
IEEE AEROSPACE AND ELECTRONIC SYSTEMS MAGAZINE (2019)
Comments on A Generic Approach for Permittivity Measurement of Dielectric Materials Using a Discontinuity in a Rectangular Waveguide
Andre Rotava et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2019)
Curing behavior and microstructure of epoxy-POSS modified novolac phenolic resin with different substitution degree
Zixuan Lei et al.
POLYMER (2019)
Low-Dielectric Constant and Low-Temperature Curable Polyimide/POSS Nanocomposites
Chao Huang et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Preparation and properties of cyanate-based wave-transparent laminated composites reinforced by dopamine/POSS functionalized Kevlar cloth
Lin Tang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Wetting of AgCuTi alloys on quartz fiber reinforced composite modified by vertically aligned carbon nanotubes
L. X. Zhang et al.
CARBON (2019)
Natural fiber-reinforced high-density polyethylene composite hybridized with ultra-high molecular weight polyethylene
Haibin Ning et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Effect of poly(ether ether ketone) and allyl compounds on microstructure and properties of bismaleimide
Yufei Chen et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Low Dielectric Fluorinated Polynorbornene with Good Thermostability and Transparency Derived from a Biobased Allylphenol (Eugenol)
Linxuan Fang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
SIW Multibeam Antenna Array at 30 GHz for 5G Mobile Devices
Carla Di Paola et al.
IEEE ACCESS (2019)
Ga and Ce ion-doped phosphate glass fibres with antibacterial properties and their composite for wound healing applications
Agata Lapa et al.
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Controllable organic magnetoresistance in polyaniline coated poly(p-phenylene-2,6-benzobisoxazole) short fibers
Hongbo Gu et al.
CHEMICAL COMMUNICATIONS (2019)
Bio-silicon reinforced siloxane core polyimide green nanocomposite with multifunctional behavior
Prabunathan Pichaimani et al.
HIGH PERFORMANCE POLYMERS (2018)
Thermally stabilized bismaleimide-triazine resin composites for 10-GHz level high-frequency application
Jie Yang et al.
HIGH PERFORMANCE POLYMERS (2018)
Low-viscosity and soluble phthalonitrile resin with improved thermostability for organic wave-transparent composites
Zuoqiang Wu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Effects of electron beam irradiation on structure and properties of ultra-high molecular weight polyethylene fiber
Dongliang Dai et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Mechanical and vibration response of insulated hybrid composites
Somen K. Bhudolia et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Synthesis and properties of cured epoxy mixed resin systems modified by polyphenylene oxide for production of high-frequency copper clad laminates
Ling Weng et al.
POLYMER COMPOSITES (2018)
Transcrystalline induced by MWCNTs and organic nucleating agents at the interface of glass fiber/polypropylene
Jing Ye et al.
POLYMER COMPOSITES (2018)
The effect of surface modification of glass fiber on the performance of poly(lactic acid) composites: Graphene oxide vs. silane coupling agents
Mengfan Jing et al.
APPLIED SURFACE SCIENCE (2018)
Excellent mechanical properties of long multiwalled carbon nanotube bridged Kevlar fabric
Sushant Sharma et al.
CARBON (2018)
Fabrication, proposed model and simulation predictions on thermally conductive hybrid cyanate ester composites with boron nitride fillers
Yang Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism
Longbo Luo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
A New Class of K-Band High-Q Frequency-Tunable Circular Cavity Filter
Seunggoo Nam et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2018)
Fabrication and microwave-transparent property of fluffy SiBNO ultrafine fibers by electrospinning
Weiqi Su et al.
MATERIALS LETTERS (2018)
Anomalously low dielectric constant of confined water
L. Fumagalli et al.
SCIENCE (2018)
Surface Modification of Basalt Fiber with Organic/Inorganic Composites for Biofilm Carrier Used in Wastewater Treatment
Xiaoying Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Synchronously improved dielectric and mechanical properties of wave-transparent laminated composites combined with outstanding thermal stability by incorporating iysozyme/POSS functionalized PBO fibers
Junwei Gu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Characterization and analysis of fluoride calcium silicate composite interface in remineralization of dental enamel
Zhihong Dong et al.
COMPOSITES PART B-ENGINEERING (2018)
Preparation of a sub-100 nm-thick polyetherimide coating layer with nano-TiO2 particles on poly(p-phenylene benzobisoxazole) fiber surface
Peng Zhu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Thermal, dielectric, and mechanical properties of h-BN-filled PTFE composites
Johanna Zimmermann-Ptacek et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Tertiary-amine-free, non-planar, fluorine-containing tetrafunctional epoxy and its application as high performance matrix
An Xing et al.
POLYMER TESTING (2018)
Measurements and analysis of the dielectric properties of aramid/epoxy composites based on free space method under stress conditions
Xiangyu Xu et al.
POLYMER TESTING (2018)
The novel high performance aramid fibers containing benzimidazole moieties and chloride substitutions
Longbo Luo et al.
MATERIALS & DESIGN (2018)
Construction of Anti-Ultraviolet Shielding Clothes on Poly(p-phenylene benzobisoxazole) Fibers: Metal Organic Framework-Mediated Absorption Strategy
Zhen Hu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Functionalized Aramid Fibers and Composites for Protective Applications: A Review
Prakash M. Gore et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Fabrication and investigations on the polydopamine/KH-560 functionalized PBO fibers/cyanate ester wave-transparent composites
Yusheng Tang et al.
COMPOSITES COMMUNICATIONS (2018)
Fibre-reinforced multifunctional SiC matrix composite materials
X. W. Yin et al.
INTERNATIONAL MATERIALS REVIEWS (2017)
Effects of compound coupling agents on the properties of PTFE/SiO2 microwave composites
Ying Yuan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)
Properties of Glass-Fiber Hybrid Composites: A Review
Jashanpreet Singh et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2017)
High-Frequency Radomes for Polar Region Ground Stations
Andrea Martellosio et al.
IEEE ANTENNAS AND PROPAGATION MAGAZINE (2017)
Study on the Electromagnetic Performance of Inhomogeneous Radomes for Airborne Applications-Part II: the Overall Comparison With Variable Thickness Radomes
Wanye Xu et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2017)
Bio-Based Epoxy Resins Derived From Eugenol With Low Dielectric Constant
Yuan Liu et al.
JOURNAL OF ELECTRONIC PACKAGING (2017)
High performance fluorinated Bismaleimide-Triazine resin with excellent dielectric properties
Ying Guo et al.
JOURNAL OF POLYMER RESEARCH (2017)
Preparation and mechanical properties of nano-quartz fiber filled PMMA composites
Qiu-Yun Luo et al.
MATERIALS TESTING (2017)
Polysiloxane modified phenolic resin with co-continuous structure
Shan Li et al.
POLYMER (2017)
Facile method for fabricating low dielectric constant polyimide fibers with hyperbranched polysiloxane
Jie Dong et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Ultralow dielectric, fluoride-containing cyanate ester resins with improved mechanical properties and high thermal and dimensional stabilities
Junwei Gu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Design and characterization for a high-temperature dual-band radome wall structure for airborne applications
Licheng Zhou et al.
MATERIALS & DESIGN (2017)
Dielectric Characterization at Millimeter Waves With Hybrid Microstrip-Line Method
Xiaoyou Lin et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)
Modification of basalt fibre using pyrolytic carbon coating for sensing applications
Bin Hao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Dielectric property and interfacial polarization of polymer-derived amorphous silicon carbonitride
Baisheng Ma et al.
CERAMICS INTERNATIONAL (2017)
Building unique surface structure on aramid fibers through a green layer-by-layer self-assembly technique to develop new high performance fibers with greatly improved surface activity, thermal resistance, mechanical properties and UV resistance
Lifang Zhou et al.
APPLIED SURFACE SCIENCE (2017)
Mechanical properties in glass fiber PVC-foam sandwich structures from different chopped fiber interfacial reinforcement through vacuum-assisted resin transfer molding (VARTM) processing
Qihui Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Development of wave-transparent, light-weight composites combined with superior dielectric performance and desirable thermal stabilities
Junwei Gu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Improved thermal conductivity and dielectric properties of hBN/PTFE composites via surface treatment by silane coupling agent
Chen Pan et al.
COMPOSITES PART B-ENGINEERING (2017)
Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process
V. R. Arun Prakash et al.
DEFENCE TECHNOLOGY (2017)
Investigating curing kinetics and structural relaxation phenomena of unsaturated polyester resin containing silanized silica
Mehdi Poorabdollah et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Surface Free Energy and Dielectric Properties of Vinyltriethoxysilane Functionalized SBA-15-Reinforced Unsaturated Polyester Nanocomposites
K. Sethuraman et al.
POLYMER COMPOSITES (2016)
Fabrication and Properties of CTBN/Si3N4/Cyanate Ester Nanocomposites
Chao Xie et al.
POLYMER COMPOSITES (2016)
Enhanced Interfacial Strength and UV Shielding of Aramid Fiber Composites through ZnO Nanoparticle Sizing
Brendan A. Patterson et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Deposition of carbon nanotubes onto aramid fibers using as-received and chemically modified fibers
O. Rodriguez-Uicab et al.
APPLIED SURFACE SCIENCE (2016)
Fabrication and dielectric properties of BADCy/Ni0.5Ti0.5NbO4 composites for ultra-low-loss printed circuit board application
Biao Zhang et al.
CERAMICS INTERNATIONAL (2016)
Hierarchical poly(p-phenylene benzobisoxazole)/graphene oxide reinforcement with multifunctional and biomimic middle layer
Lei Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Improvement of coating durability, interfacial adhesion and compressive strength of UHMWPE fiber/epoxy composites through plasma pre-treatment and polypyrrole coating
Xin Jin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Interfacial shear strength of microwave processed carbon fiber/epoxy composites characterized by an improved fiber-bundle pull-out test
Jing Zhou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Improving the interfacial and mechanical properties of short glass fiber/epoxy composites by coating the glass fibers with cellulose nanocrystals
A. Asadi et al.
EXPRESS POLYMER LETTERS (2016)
Cyanate ester resin modified by phenolic resin containing diphenyl oxide segments with high molecular weight
Yonghui Tu et al.
IRANIAN POLYMER JOURNAL (2016)
Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites
N. Karunagaran et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Preparation, curing, and properties of boron-containing bisphenol-S formaldehyde resin/o-cresol formaldehyde epoxy resin/nano-SiO2 composites
Weihong Wu et al.
MACROMOLECULAR RESEARCH (2016)
Thermally resistant unsaturated polyester resin with low dielectric loss based on special benzyl alcohol terminated hyperbranched polysiloxane for producing high efficiency motors using vacuum pressure impregnation technique
Cheng Zhou et al.
RSC ADVANCES (2016)
Interfacial shear strength characterization of GMA-grafted UHMWPE fiber/epoxy/nano clay hybrid nanocomposite materials
Mohammad Mohammadalipour et al.
RSC ADVANCES (2016)
Improvement of the Interfacial Shear Strength of Poly(p-phenylene benzobisoxazole) Fiber/Epoxy Resin Composite via a Novel Surface Coating Agent
Rongbiao Liu et al.
POLYMER COMPOSITES (2016)
The Effect of Atmospheric-Pressure Air Plasma Discharge Power on Adhesive Properties of Aramid Fibers
Caixia Jia et al.
POLYMER COMPOSITES (2016)
Fundamentals of Dielectric Properties Measurements and Agricultural Applications
Stuart O. Nelson
JOURNAL OF MICROWAVE POWER AND ELECTROMAGNETIC ENERGY (2016)
Synthesis of Uniform α-Si3N4 Nanospheres by RF Induction Thermal Plasma and Their Application in High Thermal Conductive Nanocomposites
Guolin Hou et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Highly Tunable Interfacial Adhesion of Glass Fiber by Hybrid Multilayers of Graphene Oxide and Aramid Nanofiber
Byeongho Park et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
A High-Reliability Kevlar Fiber-ZnO Nanowires Hybrid Nanogenerator and its Application on Self-Powered UV Detection
Lu Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
A novel Ag catalyzation process using swelling impregnation method for electroless Ni deposition on Kevlar® fiber
Hongwei Pang et al.
APPLIED SURFACE SCIENCE (2015)
The effect of moisture contamination on the relative permittivity of polymeric composite radar-protecting structures at X-band
Landon R. Grace
COMPOSITE STRUCTURES (2015)
Modification of surface functionality of multi-walled carbon nanotubes on fracture toughness of basalt fiber-reinforced composites
Seong-Ock Lee et al.
COMPOSITES PART B-ENGINEERING (2015)
Combined effect of interfacial strength and fiber orientation on mechanical performance of short Kevlar fiber reinforced olefin block copolymer
Sirui Fu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
An Improved Analytical Model for Fast Evaluating Absorbing Material Properties for 220-GHz FW BWO
Jinchi Cai et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2015)
Heat resistance of new biobased polymeric materials, focusing on starch, cellulose, PLA, and PHA
Nanou Peelman et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Fracture toughness and surface morphology of polysulfone-modified epoxy resin
Hu Jin et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)
The influence of the nature of POSSs cage's periphery on the thermal stability of a series of new bridged POSS/PS nanocomposites
Ignazio Blanco et al.
POLYMER DEGRADATION AND STABILITY (2015)
Preparation, Characterization, and Properties of Novel Polyimide-SiO2 Hybrid Composites Based on Bipyridine for Low Dielectric Applications
Sueleyman Koytepe et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2015)
Temperature-Dependent Electromagnetic Performance Predictions of a Hypersonic Streamlined Radome
Raveendranath U. Nair et al.
PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER (2015)
Adamantane-based epoxy resin and siloxane-modified adamantane-based epoxy resin: Characterization of thermal, dielectric and optical properties
C. W. Tsai et al.
REACTIVE & FUNCTIONAL POLYMERS (2015)
Comparison of effects on PBO fiber by air and oxygen dielectric barrier discharge plasma
Zhe Liu et al.
VACUUM (2015)
Unique surface modified aramid fibers with improved flame retardancy, tensile properties, surface activity and UV-resistance through in situ formation of hyperbranched polysiloxane-Ce0.8Ca0.2O1.8 hybrids
Xiaoling Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Surface Modification of Aramid Fibers by Bio-Inspired Poly(dopamine) and Epoxy Functionalized Silane Grafting
Rina Sa et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Effect and origin of the structure of hyperbranched polysiloxane on the surface and integrated performances of grafted Kevlar fibers
Hongrui Zhang et al.
APPLIED SURFACE SCIENCE (2014)
Gas pressure sintering of BN/Si3N4 wave-transparent material with Y2O3-MgO nanopowders addition
Yujun Zhao et al.
CERAMICS INTERNATIONAL (2014)
Enhanced interfacial adhesion of glass fibers by tetravinylsilane plasma modification
V. Cech et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Development of hexa (aminophenyl) cyclotriphosphazene-modified cyanate ester composites for high-temperature applications
K. Krishnadevi et al.
HIGH PERFORMANCE POLYMERS (2014)
Comparative Study of Silicone Resin Cured with a Linear and a Branched Cross-Linking Agent
Xibing Zhan et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Mechanical, Dielectric, and Electromechanical Properties of Silicone Dielectric Elastomer Actuators
Il Jin Kim et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Mode Coupling in Plastic-Clad Silica Fibers and Organic Glass-Clad PMMA Fibers
Svetislav Savovic et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2014)
Postpolymerization of Functional Organosiloxanes: An Efficient Strategy for Preparation of Low-k Material with Enhanced Thermostability and Mechanical Properties
Chao Yuan et al.
MACROMOLECULES (2014)
High performance low-k cyanate ester resins with a thermally stable cyclodextrin microsphere
Yannan Tang et al.
RSC ADVANCES (2014)
Unique UV-resistant and surface active aramid fibers with simultaneously enhanced mechanical and thermal properties by chemically coating Ce0.8Ca0.2O1.8 having low photocatalytic activity
Xiaoling Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Dielectric Behavior of Epoxy/BaTiO3 Composites Using Nanostructured Ceramic Fibers Obtained by Electrospinning
H. A. Avila et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Electrically Driven Tuning of the Dielectric Constant in MoS2 Layers
Elton J. G. Santos et al.
ACS NANO (2013)
Polyhedral Oligosilsesquioxane-Modified Boron Nitride Nanotube Based Epoxy Nanocomposites: An Ideal Dielectric Material with High Thermal Conductivity
Xingyi Huang et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites
M. Ramesh et al.
COMPOSITES PART B-ENGINEERING (2013)
High performance cyanate ester resins/reactive porous polymeric microsphere systems with low-temperature processability
Chao Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Improvement of surface property of HMPBO fibers by polyphosphoric acid/absolute alcohol under ultrasonic vibration
Junwei Gu et al.
FIBERS AND POLYMERS (2013)
High-performance transparent solvent-free silicone resins with stable storage and low viscosity based on new hyperbranched polysiloxanes
M. Zhu et al.
HIGH PERFORMANCE POLYMERS (2013)
Curing behavior and dielectric properties of amino-functionalized polyhedral oligomeric silsesquioxane/cyanate ester resin hybrids
Zengping Zhang et al.
HIGH PERFORMANCE POLYMERS (2013)
Measurement of Complex Permittivity of Cylindrical Objects in the E-Plane of a Rectangular Waveguide
M. Jaleel Akhtar et al.
IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING (2013)
Improvement of Interfacial Shear Strengths of Polybenzobisoxazole Fiber/Epoxy Resin Composite by n-TiO2 Coating
Jun Qian et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Acid corrosion resistance and mechanism of E-glass fibers: boron factor
Hong Li et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Structures and Properties of HMPBO Fibers Treated by Oxygen Plasma/Polyhedral Oligomeric Silsesquioxane
Hailin Li et al.
POLYMER COMPOSITES (2013)
A system for measuring complex dielectric properties of thin films at submillimeter wavelengths using an open hemispherical cavity and a vector network analyzer
Rezwanur Rahman et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2013)
An efficient interfacial flame-resistance mode to prepare glass fiber reinforced and flame retarded polyamide 6 with high performance
Yi Han et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites
V. Manikandan et al.
COMPOSITES PART B-ENGINEERING (2012)
Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)
Wenying Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Novel High-Performance Wave-Transparent Aluminum Phosphate/Cyanate Ester Composites
Zhouqiang Sun et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
High performance hybrids based on a novel incompletely condensed polyhedral oligomeric silsesquioxane and bismaleimide resin with improved thermal and dielectric properties
Li Zeng et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Microwave absorption properties of Fe3O4/CuPc hybrid material with cooperative dual nonlinear dielectric/magnetic resonance
Zhen Ma et al.
MATERIALS LETTERS (2012)
Preparation and properties of addition curable silicone resins with excellent dielectric properties and thermal resistance
Beijing Zhang et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Polymer Matrix Composites: A Perspective for a Special Issue of Polymer Reviews
Michael R. Kessler
POLYMER REVIEWS (2012)
Preparation and properties of hollow silica tubes/bismaleimide/diallylbisphenol A composites with improved toughness, dielectric properties, and flame retardancy
Wei Yao et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2012)
A new type of unsaturated polyester resin with low dielectric constant and high thermostability: preparation and properties
Xingpeng Chen et al.
RSC ADVANCES (2012)
The effect of oxygen-plasma treatment on Kevlar fibers and the properties of Kevlar fibers/bismaleimide composites
Min Su et al.
APPLIED SURFACE SCIENCE (2011)
Influence of Grafting Density of Diblock Copolymers on Interfacial Assembly Behavior and Interfacial Shear Strength of Glass Fiber/Polystyrene Composites
Tao Shen et al.
COMPOSITE INTERFACES (2011)
Surface modification and characterization of basalt fibers with hybrid sizings
Bin Wei et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Aramid/epoxy composites sandwich structures for low-observable radomes
Ilbeom Choi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Preparation and properties of mesoporous silica/bismaleimide/diallylbisphenol composites with improved thermal stability, mechanical and dielectric properties
J. Hu et al.
EXPRESS POLYMER LETTERS (2011)
The Modification of Kevlar Fibers in Coupling Agents by γ-ray Co-irradiation
Zhang Yanhua et al.
FIBERS AND POLYMERS (2011)
Properties and Origins of High-Performance Poly(phenylene oxide)/Cyanate Ester Resins for High-Frequency Copper-Clad Laminates
Rui Gao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Strengthening of basalt fibers with nano-SiO2-epoxy composite coating
Bin Wei et al.
MATERIALS & DESIGN (2011)
Two-way bending behavior of 3-D GFRP sandwich panels with through-thickness fiber insertions
M. Dawood et al.
COMPOSITE STRUCTURES (2010)
Surface Modification of Aramid Fibers with New Chemical Method for Improving Interfacial Bonding Strength with Epoxy Resin
Tie-Min Liu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Grafting Polymer Brushes from Glass Fibers by Surface-Initiated ATRP
Hongwen Zhang et al.
MACROMOLECULAR REACTION ENGINEERING (2010)
Tensile behavior contrast of basalt and glass fibers after chemical treatment
Bin Wei et al.
MATERIALS & DESIGN (2010)
Polymerization conditions influence on the thermomechanical and dielectric properties of unsaturated polyester-styrene-copolymers
T. Hanemann et al.
MICROELECTRONIC ENGINEERING (2010)
Implementing quantum control for the temporal evolution of the wave function of the quantum state by using a phase-controlled light field
Li Yong-Fang et al.
ACTA PHYSICA SINICA (2010)
Assembly of triblock copolymer brush at glass fiber/polystyrene interface and its effect on interfacial shear strength
Yin Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Preparation of crystallized glass for application in fiber-type devices
Hirokazu Masai et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Determining both the permittivity and the permeability of small samples using cavity perturbation method
Johan C-E Sten et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2009)
Comparisons of microwave dielectric property measurements by transmission/reflection techniques and resonance techniques
Jyh Sheen
MEASUREMENT SCIENCE AND TECHNOLOGY (2009)
Concentration Effect of gamma-Glycidoxypropyl-trimethoxysilane on the Mechanical Properties of Glass Fiber-Epoxy Composites
Kutlay Sever et al.
POLYMER COMPOSITES (2009)
Radiation characteristics of a prolate spheroidal antenna coated with a double-negative metamaterial radome
M. D. Huang et al.
WAVES IN RANDOM AND COMPLEX MEDIA (2009)
Effectiveness of sulfate clarification of type E alkali-free glass
N. F. Zhernovaya et al.
GLASS AND CERAMICS (2008)
Single-Length Method Used to Determine the Dielectric Constant of Polydimethylsiloxane
Nick J. Farcich et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2008)
Preparation of aluminum borate whisker reinforced aluminum phosphate wave-transparent materials
Lue ZhenYu et al.
CHINESE SCIENCE BULLETIN (2008)
Open resonator system for automatic and precise dielectric measurement at millimeter wavelengths
Y. F. Gui et al.
INTERNATIONAL JOURNAL OF INFRARED AND MILLIMETER WAVES (2008)
Interfacial effect on dielectric properties of polymer nanocomposites filled with core/shell-structured particles
Yang Shen et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Effect of grafting alkoxysilane on the surface properties of Kevlar fiber
Tao Ai et al.
POLYMER COMPOSITES (2007)
Dielectric and thermal properties of polymer network based on bismaleimide resin and cyanate ester containing dicyclopentadiene or dipentene. III
Hann-Jang Hwang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Resonance methods for microwave studies of dielectrics - (Review)
V. N. Egorov
INSTRUMENTS AND EXPERIMENTAL TECHNIQUES (2007)
A novel method for determination of dielectric properties of materials using a combined embedded modulated scattering and near-field microwave techniques - Part II: Dielectric property recalculation
D Hughes et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
Measurement of dielectric parameters of small samples at X-band frequencies by cavity perturbation technique
A Verma et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
Surface analysis of γ-ray irradiation modified PBO fiber
CH Zhang et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Surface modification of glass and glass fibres by plasma surface treatment
KB Lim et al.
SURFACE AND INTERFACE ANALYSIS (2004)
New epoxy resins cured with tetraaminophenyladamantane (TAPA)
Q Wei et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2004)
Surface modification and interfacial adhesion of rigid rod PBO fibre by methanesulfonic acid treatment
GM Wu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Modeling control over determination of dielectric properties by the perturbation technique
VV Komarov et al.
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2003)
Wave reflection and transmission in beams containing delamination and inhomogeneity
CH Wang et al.
JOURNAL OF SOUND AND VIBRATION (2003)
Properties and toughening of heat-resistant thermosets based on unsaturated ester resins
DA Canelas et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Effect of surface modification by bromination and metalation on Kevlar fibre-epoxy adhesion
JS Lin
EUROPEAN POLYMER JOURNAL (2002)
Studies on surface energetics of class fabrics in an unsaturated polyester matrix system: Effect of sizing treatment on glass fabrics
SJ Park et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)
Characterization of thin-film low-dielectric constant materials in the microwave range using on-wafer parallel-plate transmission lines
G Song et al.
IEEE MICROWAVE AND GUIDED WAVE LETTERS (2000)
Share Paper
