Related references
Note: Only part of the references are listed.Effect of sintering pressure on electrical transport and thermoelectric properties of polycrystalline SnSe
J. Y. Cho et al.
BULLETIN OF MATERIALS SCIENCE (2020)
Reactive Spark Plasma Synthesis of Porous Bioceramic Wollastonite
E. K. Papynov et al.
RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2020)
A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications
Zheng-Yang Hu et al.
MATERIALS & DESIGN (2020)
Influence of the heating rate on grain size of alumina ceramics prepared via spark plasma sintering (SPS)
Vojtech Necina et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Effect of heating rate on properties of transparent aluminum oxynitride sintered by spark plasma sintering
Yingchun Shan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Densification, Microstructure, and Tribomechanical Performance of SPS-Processed 27R-SiAlON Polytype-Reinforced AlN: A Comparison Between Continuous and Pulsed Direct Current Mode
Mita Biswas et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Fabrication of Porous Materials by Spark Plasma Sintering: A Review
Dina V. Dudina et al.
MATERIALS (2019)
Grain growth mechanism and thermoelectric properties of hot press and spark plasma sintered Na-doped PbTe
Min Ho Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Step bunching phenomena on Si(001) surface induced by DC heating during sublimation and Si deposition
E. E. Rodyakina et al.
JOURNAL OF CRYSTAL GROWTH (2019)
Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering
Geuntak Lee et al.
ACTA MATERIALIA (2018)
Effect of Electromagnetic Fields on Calcium Carbonate Solution Crystallization and Magnetic Memory Effect
Jianguo Wang et al.
CRYSTAL RESEARCH AND TECHNOLOGY (2018)
Influence of electric current on interdiffusion kinetics of W-Ti system during spark plasma sintering
Shenghua Deng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Influence of pulsed current during high pressure sintering on crystallite size and phase composition of diamond with Ti-B bonding phase
L. Jaworska et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Consolidation of bone-like apatite bioceramics by spark plasma sintering of amorphous carbonated calcium phosphate at very low temperature
C. Ortali et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Effect of electric current on crystal orientation and its contribution to densification during spark plasma sintering
Shenghua Deng et al.
MATERIALS LETTERS (2018)
Review of flash sintering: materials, mechanisms and modelling
Min Yu et al.
ADVANCES IN APPLIED CERAMICS (2017)
Electric field assisted sintering of electroceramics and in situ analysis by impedance spectroscopy
R. Muccillo et al.
JOURNAL OF ELECTROCERAMICS (2017)
Effect of current on the sintering of pre-oxidized copper powders by SPS
Collet Romaric et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Preparation of bulk-nanostructured UO2 pellets using high-pressure spark plasma sintering for LWR fuel safety assessment
Vaclav Tyrpekl et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Effect of pulsed current on the microstructure evolution of Cu-Sn intermetallic compounds
Kewei Li et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Rapid growth of zinc oxide nanobars in presence of electric field by physical vapor deposition
Mehraban Jouya et al.
JOURNAL OF THEORETICAL AND APPLIED PHYSICS (2017)
Spark plasma sintering mechanisms at the necks between TiAl powder particles
Zofia Trzaska et al.
ACTA MATERIALIA (2016)
Rapidly sintering of interconnected porous Ti-HA biocomposite with high strength and enhanced bioactivity
L. Zhang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
The Manufacturing of High Porosity Iron with an Ultra-Fine Microstructure via Free Pressureless Spark Plasma Sintering
Guodong Cui et al.
MATERIALS (2016)
Densification, mechanical and tribological properties of ZrB2 by SPS: Effect of pulsed current
S. Chakraborty et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Spark Plasma Sintering as an Approach to Manufacture Bulk Materials: Feasibility and Cost Savings
James P. Kelly et al.
JOM (2015)
Microscopic and Spectroscopic Characterization of Stacking-Sequence Disordered SiC
Manshi Ohyanagi et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments
Olivier Guillon et al.
ADVANCED ENGINEERING MATERIALS (2014)
Directional solidification of silicon under the influence of travelling magnetic field
M. Cablea et al.
JOURNAL OF CRYSTAL GROWTH (2014)
Influence of spark plasma sintering (SPS) processing parameters on microstructure and mechanical properties of nickel
Tushar Borkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Low-Temperature Spark Plasma Sintering of Pure Nano WC Powder
Salvatore Grasso et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Effect of the strength of an AC electric field compared to DC on the sintering rate and related grain size of zirconia (3Y-TZP)
Hans Conrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Grain size distribution in 3 mol.% yttria-stabilized zirconia sintered with a small AC electric field
J. Obare et al.
SCRIPTA MATERIALIA (2013)
Transmitting, emitting and controlling light: Processing of transparent ceramics using current-activated pressure-assisted densification
Y. Kodera et al.
SCRIPTA MATERIALIA (2013)
Decoupling the effects of pressure and current in spark plasma sintering: Synthesis of CU0.9V2O5
Gauthier Jouan et al.
SOLID STATE IONICS (2013)
Fine-grained transparent MgAl2O4 spinel obtained by spark plasma sintering of commercially available nanopowders
Guillaume Bonnefont et al.
CERAMICS INTERNATIONAL (2012)
In situ synthesis and sintering of ZrB2 porous ceramics by the spark plasma sintering-reactive synthesis (SPS-RS) method
Huiping Yuan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Effect of pulsed DC current on neck growth between tungsten wires and tungsten plates during the initial stage of sintering by the spark plasma sintering method
Naoki Toyofuku et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Pressure-less spark plasma sintering effect on non-conventional necking process during the initial stage of sintering of copper and alumina
Yann Aman et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Spark plasma sintering of alumina: Study of parameters, formal sintering analysis and hypotheses on the mechanism(s) involved in densification and grain growth
J. Gurt Santanach et al.
ACTA MATERIALIA (2011)
Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process
Zuhair A. Munir et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Highly Infrared Transparent Nanometric Tetragonal Zirconia Prepared by High-Pressure Spark Plasma Sintering
Haibin Zhang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Spark plasma sintered tantalum carbide: Effect of pressure and nano-boron carbide addition on microstructure and mechanical properties
Srinivasa R. Bakshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Grain Size Effect in the Electrical Properties of Nanostructured Functional Oxides through Pressure Modification of the Spark Plasma Sintering Method
D. V. Quach et al.
ADVANCED ENGINEERING CERAMICS AND COMPOSITES (2011)
Strong Hierarchically Porous Monoliths by Pulsed Current Processing of Zeolite Powder Assemblies
Petr Vasiliev et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Pressure effects and grain growth kinetics in the consolidation of nanostructured fully stabilized zirconia by pulsed electric current sintering
Dat V. Quach et al.
ACTA MATERIALIA (2010)
Current-Activated, Pressure-Assisted Densification of Materials
J. E. Garay
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Transmission electron microscopy characterization of spark plasma sintered ZrB2 ceramic
Takashi Mizuguchi et al.
CERAMICS INTERNATIONAL (2010)
Inhibition of grain growth during the final stage of multi-stage spark plasma sintering of oxide ceramics
K. Madhav Reddy et al.
SCRIPTA MATERIALIA (2010)
Spark-Plasma-Sintering Condition Optimization for Producing Transparent MgAl2O4 Spinel Polycrystal
Koji Morita et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Effects of heating rate on microstructure and transparency of spark-plasma-sintered alumina
Byung-Nam Kim et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Consolidation/synthesis of materials by electric current activated/assisted sintering
Roberto Orru et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Grain-boundary structure and microstructure development mechanism in 2-8 mol% yttria-stabilized zirconia polycrystals
K. Matsui et al.
ACTA MATERIALIA (2008)
Unprecedented room-temperature electrical power generation using nanoscale fluorite-structured oxide electrolytes
Sangtae Kim et al.
ADVANCED MATERIALS (2008)
The absence of plasma in spark plasma sintering
Dustin M. Hulbert et al.
JOURNAL OF APPLIED PHYSICS (2008)
Effect of pulsed DC current on atomic diffusion of Nb-C diffusion couple
Takayuki Kondo et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Grain size control by pressure application regime during spark plasma sintering of Nd-YAG nanopowders
Rachman Chaim et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Influence of pulsed DC current and electric field on growth of carbide ceramics during spark plasma sintering
Takayuki Kondo et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2008)
Consolidation enhancement in spark-plasma sintering: Impact of high heating rates
Eugene A. Olevsky et al.
JOURNAL OF APPLIED PHYSICS (2007)
Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure pulsed electric current sintering
Umberto Anselmi-Tamburini et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Kinetics of current-enhanced dissolution of nickel in liquid aluminum
J. F. Zhao et al.
ACTA MATERIALIA (2007)
Current effects on neck growth in the sintering of copper spheres to copper plates by the pulsed electric current method
James M. Frei et al.
JOURNAL OF APPLIED PHYSICS (2007)
Densification and properties of zirconia prepared by three different sintering techniques
P. Dahl et al.
CERAMICS INTERNATIONAL (2007)
Meso/macroporous, mechanically stable silica monoliths of complex shape by controlled fusion of mesoporous spherical particles
Petr O. Vasiliev et al.
CHEMISTRY OF MATERIALS (2006)
Fast low-temperature consolidation of bulk nanometric ceramic materials
U Anselmi-Tamburini et al.
SCRIPTA MATERIALIA (2006)
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
ZA Munir et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Fundamental investigations on the spark plasma sintering/synthesis process III. Current effect on reactivity
U Anselmi-Tamburini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Densification maps for spark plasma sintering of nanocrystalline MgO ceramics
R Chaim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Fast densification and deformation of titanium powder
M Eriksson et al.
POWDER METALLURGY (2005)
Influence of synthesis temperature on the defect structure of boron carbide: Experimental and modeling studies
U Anselmi-Tamburini et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Fundamental investigations on the spark plasma sintering/synthesis process - II. Modeling of current and temperature distributions
U Anselmi-Tamburini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Fundamental investigations on the spark plasma sintering/synthesis process - I. Effect of dc pulsing on reactivity
W Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Crystallization of metallic glasses under the influence of high density dc currents
TB Holland et al.
JOURNAL OF APPLIED PHYSICS (2004)
Consolidation of nanostructured β-SiC by spark plasma sintering
T Yamamoto et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
Electric current enhanced defect mobility in Ni3Ti intermetallics
JE Garay et al.
APPLIED PHYSICS LETTERS (2004)
Consolidation of nanostructured SiC with disorder-order transformation
M Ohyanagi et al.
SCRIPTA MATERIALIA (2004)
Direct current heating effects on Si(111) vicinal surfaces
H Minoda
JOURNAL OF PHYSICS-CONDENSED MATTER (2003)
Enhanced growth of intermetallic phases in the Ni-Ti system by current effects
JE Garay et al.
ACTA MATERIALIA (2003)
Spark plasma sintering as advanced PM sintering method
V Mamedov
POWDER METALLURGY (2002)
Spark plasma sintering of alumina
ZJ Shen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
Electromigration effects in Al-Au multilayers
N Bertolino et al.
SCRIPTA MATERIALIA (2001)
Effects of electric current on solid state phase transformations in metals
H Conrad
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)