Related references
Note: Only part of the references are listed.Abrasive Wear Performance of Jute-Glass-Carbon-Reinforced Composites: Effect of Stacking Sequence and Fibers Relative Amounts
M. A. Abd El-Baky et al.
JOURNAL OF NATURAL FIBERS (2021)
New processing technique for biodegradable kenaf composites: A simple alternative to commercial automotive parts
Nabilah Afiqah Mohd Radzuan et al.
COMPOSITES PART B-ENGINEERING (2020)
Pinned Hybrid Glass-Flax Composite Laminates Aged in Salt-Fog Environment: Mechanical Durability
Luigi Calabrese et al.
POLYMERS (2020)
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests
Lokman Gemi et al.
COMPOSITES PART B-ENGINEERING (2020)
Evolution of the bearing failure map of pinned flax composite laminates aged in marine environment
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2020)
Experimental study on the improvement of mechanical properties of GLARE using nanofillers
Marwa A. Abd El-baky et al.
POLYMER COMPOSITES (2020)
An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas
N. Karthi et al.
MATERIALS TODAY-PROCEEDINGS (2020)
The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy
M. Megahed et al.
JOURNAL OF INDUSTRIAL TEXTILES (2019)
Flexural fatigue performance of hybrid composite laminates based on E-glass and polypropylene fibers
M. A. Abd El-Baky et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
Mechanical properties of inter-ply hybrid composites reinforced with glass and polyamide fibers
A. I. Selmy et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
Mechanical and dynamic performance of woven flax/E-glass hybrid composites
M. Cihan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Effect of interface in hybrid reinforcement of flax/glass on mechanical properties of vinyl ester composites
Naga C. Kumar et al.
POLYMER TESTING (2019)
Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates
Dongdong Chen et al.
THIN-WALLED STRUCTURES (2019)
Damage investigation and assessment due to low-velocity impact on flax/glass hybrid composite plates
Antigoni K. Barouni et al.
COMPOSITE STRUCTURES (2019)
Effect of stacking sequence on tensile, flexural and thermomechanical properties of hybrid flax/glass and jute/glass thermoset composites
Erdem Selver et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Flexural fatigue and failure probability analysis of polypropylene-glass hybrid fibres reinforced epoxy composite laminates
Marwa. A. Abd El-baky et al.
PLASTICS RUBBER AND COMPOSITES (2018)
Mechanical and impact characterisation of flax and basalt fibre vinylester composites and their hybrids
Cristiano Fragassa et al.
COMPOSITES PART B-ENGINEERING (2018)
Investigation into Mode II interlaminar fracture toughness characteristics of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Bearing strength and failure behavior of pinned hybrid glass-flax composite laminates
V Fiore et al.
POLYMER TESTING (2018)
Mechanical performance of intraply and inter-intraply hybrid composites based on e-glass and polypropylene unidirectional fibers
M. A. Attia et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Flexural Fatigue Performance of Glass Fiber/Epoxy Step-Wise Functionally and Non-Functionally Graded Composites of Different Structures
A. I. Selmy et al.
INTERNATIONAL POLYMER PROCESSING (2017)
Fabrication and characterization of functionally graded nanoclay/glass fiber/epoxy hybrid nanocomposite laminates
Ahmed Abou El-Wafa Megahed et al.
IRANIAN POLYMER JOURNAL (2017)
A review on new bio-based constituents for natural fiber-polymer composites
Taneli Vaisanen et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Mechanical and impact characterization of hybrid composite laminates with carbon, basalt and flax fibres
E. Nisini et al.
COMPOSITES PART B-ENGINEERING (2017)
Low velocity impact performance of stitched flax/epoxy composite laminates
M. Ravandi et al.
COMPOSITES PART B-ENGINEERING (2017)
Influence of moisture absorption on the impact properties of flax, basalt and hybrid flax/basalt fiber reinforced green composites
Irena Zivkovic et al.
COMPOSITES PART B-ENGINEERING (2017)
Modification of flax fiber surface and its compatibilization in polylactic acid/flax composites
Xuelian Xia et al.
IRANIAN POLYMER JOURNAL (2016)
Numerical investigation of the hybridisation mechanism in fibre reinforced hybrid composites subjected to flexural load
Mehdi Kalantari et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of external basalt layers on durability behaviour of flax reinforced composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2016)
Experimental optimization of flexural behaviour through inter-ply fibre hybridization in FRP composite
Rajesh Kumar Prusty et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Low velocity impact response of basalt-aluminium fibre metal laminates
L. Ferrante et al.
MATERIALS & DESIGN (2016)
Hybridized carbon and flax fiber composites for tailored performance
Jeff Flynn et al.
MATERIALS & DESIGN (2016)
Low impact behaviour of hemp fibre reinforced epoxy composites
G. Caprino et al.
COMPOSITE STRUCTURES (2015)
Evaluation of the damping of hybrid carbon-flax reinforced composites
Mustapha Assarar et al.
COMPOSITE STRUCTURES (2015)
Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
COMPOSITES PART B-ENGINEERING (2015)
Experimental Determination of Mechanical Properties of Banana Jute Hybrid Composite
B. Vijaya Ramnath et al.
FIBERS AND POLYMERS (2015)
In-plane shear characteristics of unidirectional glass fiber/epoxy functionally graded (FG) and nonfunctionally graded (NFG) composite laminates with statistical analysis
A. I. Selmy et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Flax fibre and its composites - A review
Libo Yan et al.
COMPOSITES PART B-ENGINEERING (2014)
Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers
I. D. G. Ary Subagia et al.
COMPOSITES PART B-ENGINEERING (2014)
The role of twist and crimp on the vibration behaviour of flax fibre composites
F. Duc et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Charpy impact response of basalt fiber reinforced epoxy and basalt fiber metal laminate composites: Experimental study
R. Eslami Farsani et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Flexural and impact behaviour of carbon/basalt fibers hybrid laminates
A. Dorigato et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Analysis of curaua/glass hybrid interlayer laminates
Clarissa C. Angrizani et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite
V. S. Srinivasan et al.
MATERIALS & DESIGN (2014)
Development of flax/carbon fibre hybrid composites for enhanced properties
H. N. Dhakal et al.
CARBOHYDRATE POLYMERS (2013)
Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites
Fabrizio Sarasini et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Failure and reliability analysis of pinned-joints composite laminates: Effects of stacking sequences
U. A. Khashaba et al.
COMPOSITES PART B-ENGINEERING (2013)
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
Yongli Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Experimental study on flexural fatigue behavior of glass fibers/epoxy hybrid composites with statistical analysis
A. I. Selmy et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Evaluation of mechanical properties of abaca-jute-glass fibre reinforced epoxy composite
B. Vijaya Ramnath et al.
MATERIALS & DESIGN (2013)
Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
MATERIALS & DESIGN (2013)
Critical review of recent publications on use of natural composites in infrastructure
David B. Dittenber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
In-plane shear properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid and non-hybrid composites
A. I. Selmy et al.
COMPOSITES PART B-ENGINEERING (2012)
Interlaminar shear behavior of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid and non-hybrid composite laminates
A. I. Selmy et al.
COMPOSITES PART B-ENGINEERING (2012)
Flexural properties of hybrid composites reinforced by S-2 glass and T700S carbon fibres
Chensong Dong et al.
COMPOSITES PART B-ENGINEERING (2012)
Modelling delamination onset and growth in pin loaded composite laminates
A. Atas et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Fatigue resistance of basalt fibers-reinforced laminates
A. Dorigato et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures
Jin Zhang et al.
MATERIALS & DESIGN (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Surface modification and characterization of basalt fibers with hybrid sizings
Bin Wei et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loads
S. M. R. Khalili et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites
A. I. Selmy et al.
MATERIALS & DESIGN (2011)
Monotonic and cyclic short beam shear response of 3D woven composites
T. R. Walter et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Mechanical Performance of Short Banana/Sisal Hybrid Fiber Reinforced Polyester Composites
Maries Idicula et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites
M. Jawaid et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The Effect of Different Laminations on Mechanical and Physical Properties of Hybrid Composites
H. P. S. Abdul Khalil et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Q. Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes
Zhihang Fan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites
K. Sabeel Ahmed et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Behavior of notched and unnotched [0/±30/±60/90]s GFR/EPOXY composites under static and fatigue loads
U. A. Khashaba et al.
COMPOSITE STRUCTURES (2007)
Cars from bio-fibres
Andrzej K. Bledzki et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2006)
Partial replacement of E-glass fibers with flax fibers in composites and effect on falling weight impact performance
C Santulli et al.
JOURNAL OF MATERIALS SCIENCE (2005)
A study of the mechanical properties of randomly oriented short banana and sisal hybrid fiber reinforced polyester composites
M Idicula et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Lignocellulose-based hybrid bilayer laminate composite: Part I - Studies on tensile and impact behavior of oil palm fiber-glass fiber-reinforced epoxy resin
ABA Hariharan et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Influence of kink bands on the tensile strength of flax fibers
C Baley
JOURNAL OF MATERIALS SCIENCE (2004)
The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength
A Aktas et al.
COMPOSITE STRUCTURES (2003)
Effect of resin and fibre properties on impact and compression after impact performance of CFRP
DDR Cartie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
C Baley
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
An analytical assessment of using the losipescu shear test for hybrid composites
MYM Chiang et al.
COMPOSITES PART B-ENGINEERING (2002)
The effect of alkali treatment on the adhesion characteristics of sisal fibres
ETN Bisanda
APPLIED COMPOSITE MATERIALS (2000)