Related references
Note: Only part of the references are listed.Experimental assessment of adding carbon nanotubes on the impact properties of Kevlar-ultrahigh molecular weight polyethylene fibers hybrid composites
Mansour Bigdilou et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Fabrication of Cost Effective Fiber Metal Laminates Based on Jute and Glass Fabrics for Enhanced Mechanical Properties
M. A. Abd El-Baky et al.
JOURNAL OF NATURAL FIBERS (2022)
Experimental investigation of flexural properties of glass fiber-epoxy self-healable composite structures containing capsulated epoxy healing agent and NiCl2(imidazole)4 catalyst
Hossein Ebrahimnezhad-Khaljiri et al.
JOURNAL OF INDUSTRIAL TEXTILES (2021)
Static and dynamic characteristics of nano-reinforced 3D-fiber metal laminates using non-destructive techniques
B. Soltannia et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)
Experimental failure analysis and mechanical performance evaluation of fiber-metal sandwich laminates interleaved with polyamide-6,6 interlayers through the combined usage of acoustic emission, thermography and microscopy techniques
Bertan Beylergil et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)
The flexural and impact behavior of the laminated aluminum-epoxy/basalt fibers composites containing nanoclay: An experimental investigation
Farid Bahari-Sambran et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)
The tensile properties and interlaminar shear strength of microcapsules-glass fibers/epoxy self-healable composites
Hossein Ebrahimnezhad-Khaljiri et al.
ENGINEERING FRACTURE MECHANICS (2020)
High Velocity Impact Response of Aluminum- Carbon Fibers-Epoxy Laminated Composites Toughened by Nano Silica and Zirconia
Hossein Rahmani et al.
FIBERS AND POLYMERS (2020)
Effect of interlayer hybridization of carbon, Kevlar, and glass fibers with oxidized polyacrylonitrile fibers on the mechanical behaviors of hybrid composites
Hossein Ebrahimnezhad-Khaljiri et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)
Improving the Flexural Properties of E-Glass Fibers/Epoxy Isogrid Stiffened Composites through Addition of 3-Glycidoxypropyltrimethoxysilane Functionalized Nanoclay
Hossein Ebrahimnezhad-Khaljiri et al.
SILICON (2020)
Improvement of Impact and Water Barrier Properties of GLARE by Incorporation of Different Types of Nanoparticles
M. Megahed et al.
FIBERS AND POLYMERS (2020)
The effect of multi-walled carbon nanotubes on the mechanical behavior of basalt fibers metal laminates: An experimental study
Hamed Aghamohammadi et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Effect of nanoalumina on fatigue characteristics of fiber metal laminates
E. Prasad et al.
POLYMER TESTING (2020)
Mechanical Properties of Multiscale Graphene Oxide/Basalt Fiber/Epoxy Composites
Nahid Jamali et al.
FIBERS AND POLYMERS (2019)
Multiscale composites based on a nanoclay-enhanced matrix and E-glass chopped strand mat
Ali Feiz et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Tribological behavior of epoxy composites filled with nanodiamond and Ti3AlC2 -TiC particles: A comparative study
Hamed Aghamohammadi et al.
CERAMICS INTERNATIONAL (2019)
The Effect of Different Configurations on the Bending and Impact Properties of the Laminated Composites of Aluminum-Hybrid Basalt and Jute Fibers-Epoxy
Nabiollah Zareei et al.
FIBERS AND POLYMERS (2019)
Improvement in the mechanical and tribological behavior of epoxy matrix with the inclusion of synthesized Ti3AlC2 MAX particles
Rasoul Jamshidi et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Interlaminar shear strength and tensile properties of environmentally-friendly fiber metal laminates reinforced by hybrid basalt and jute fibers
Nabiollah Zareei et al.
POLYMER TESTING (2019)
Surface Treatment for Improving Durability of Aluminum-Lithium Adhesive-Bonded Joints under Hot-Humid Exposure
Jian Li et al.
COATINGS (2019)
Investigation of the effect of use of Nano-Al2O3, Nano-TiO2 and Nano-SiO2 powders on strength of single lap joints bonded with epoxy adhesive
Ismail Sarac et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of applying a combination of surface treatments on the mechanical behavior of basalt fiber metal laminates
M. Emami Mehr et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Effect of Shape Memory Alloy Wires on the Buckling Behavior of Fiber Metal Laminates
R. Eslami-Farsani et al.
FIBERS AND POLYMERS (2019)
Influence of thermal aging on mechanical properties of fiber metal laminates hybridized with nanoclay
Moslem Najafi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)
An experimental investigation on the effect of incorporation of different nanofillers on the mechanical characterization of fiber metal laminate
M. Megahed et al.
COMPOSITES PART B-ENGINEERING (2019)
The effect of surface modified nanoclay on the interfacial and mechanical properties of basalt fiber metal laminates
F. Bahari-Sambran et al.
THIN-WALLED STRUCTURES (2019)
The effect of GNP addition on mechanical and residual stress properties of 2024-T3 aluminum and carbon fiber reinforced FML
Mustafa Yunus Askin et al.
MATERIALS RESEARCH EXPRESS (2019)
Study on strength and defect detection capability of bonded joints according to CNT content
Woo-Jin An et al.
COMPOSITE STRUCTURES (2019)
Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint
Omid Sam-Daliri et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Effect of cryogenic aging on nanophased fiber metal laminates and glass/epoxy composites
Moslem Najafi et al.
POLYMER COMPOSITES (2019)
Effect of shape memory alloy wires on high-velocity impact response of basalt fiber metal laminates
Reza Eslami-Farsani et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Effect of 3D-woven glass fabric and nanoparticles incorporation on impact energy absorption of GLARE composites
R. Amooyi Dizaji et al.
POLYMER COMPOSITES (2018)
Fatigue behavior of composite to aluminum single lap joints reinforced with graphene doped nylon 66 nanofibers
Safa Polat et al.
COMPOSITE STRUCTURES (2018)
An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates
H. Khoramishad et al.
COMPOSITE STRUCTURES (2018)
The comparison of effects of hygrothermal conditioning on mechanical properties of fibre metal laminates and fibre reinforced polymers
Krzysztof Majerski et al.
COMPOSITES PART B-ENGINEERING (2018)
Temperature dependence of the shear strength in adhesively bonded joints reinforced with multi-walled carbon nanotubes
H. Khoramishad et al.
ENGINEERING FRACTURE MECHANICS (2018)
Nanoreinforced epoxy and adhesive joints incorporating boron nitride nanotubes
Michael B. Jakubinek et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes
N. Razavi et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Effects of various aluminum surface treatments on the basalt fiber metal laminates interlaminar adhesion
Hamed Aghamohammadi et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Experimental determination of the static and fatigue strength of the adhesive joints bonded by epoxy adhesive including different particles
Ismail Sarac et al.
COMPOSITES PART B-ENGINEERING (2018)
Carbon nanotubes for enhanced interface of fiber metal laminate
A. A. Khurram et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Effect of Nanoclay Addition on the Hygrothermal Durability of Glass/Epoxy and Fiber Metal Laminates
Moslem Najafi et al.
FIBERS AND POLYMERS (2018)
Thermal and Mechanical Properties of Hybrid Carbon/Oxidized Polyacrylonitrile Fibers-Epoxy Composites
Hossein Ebrahimnezhad-Khaljiri et al.
POLYMER COMPOSITES (2017)
Introduction of nanoclay-modified fiber metal laminates
Afshin Zamani Zakaria et al.
ENGINEERING FRACTURE MECHANICS (2017)
The Evaluation of the Thermal and Mechanical Properties of Aramid/Semi-Carbon Fibers Hybrid Composites
Hossein Ebrahimnezhad-Khaljiri et al.
FIBERS AND POLYMERS (2017)
Novel fibre metal laminate sandwich composite structure with sisal woven core
Luciano Machado Gomes Vieira et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Improvement of adhesive bonding of grit-blasted steel substrates by using diluted resin as a primer
Binhua Wang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)
Effect of nano-particles on the tensile, flexural and perforation properties of the glass/epoxy composites
Ali Afrouzian et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Effect of carbon nano-filler addition on the degradation of epoxy adhesive joints subjected to hygrothermal aging
Panta Jojibabu et al.
POLYMER DEGRADATION AND STABILITY (2017)
Experimental and numerical characterization of delamination buckling behavior of a new class of GNP-reinforced 3D fiber-metal laminates
Zohreh Asaee et al.
THIN-WALLED STRUCTURES (2017)
Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Adhesive Single Lap Joints for Fiber Metal Laminate
N. Mehrsefat et al.
MECHANICS OF COMPOSITE AND MULTI-FUNCTIONAL MATERIALS, VOL 7 (2017)
Experimental analysis on the single -lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures
Idal Avinc Akpinar et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental and numerical investigation into the influence of stacking sequence on the low-velocity impact response of new 3D FMLs
Zohreh Asaee et al.
COMPOSITE STRUCTURES (2016)
Effect of different carbon nano-fillers on rheological properties and lap shear strength of epoxy adhesive joints
Panta Jojibabu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Creep behavior of basalt fiber-metal laminate composites
Vahid Daghigh et al.
COMPOSITES PART B-ENGINEERING (2016)
Toughening mechanisms in polymer nanocomposites: From experiments to modelling
M. Quaresimin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Effects of hygrothermal and ambient humidity conditioning on shear strength of metal-GFRP single lap joints co-cured in and out of water
Mohammad S. Islam et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Effect of grit-blasting air pressure on adhesion strength of resin to titanium
Aftab Ahmed Khan et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Improvement of adhesion performance between aluminum alloy sheet and epoxy based on anodizing technique
Yiwei Xu et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Effect of MWCNT filled epoxy adhesives on the quality of adhesively bonded joints
M. Konstantakopoulou et al.
PLASTICS RUBBER AND COMPOSITES (2016)
Investigating the effects of reduced graphene oxide additive on the tensile strength of adhesively bonded joints at different extension rates
Mohammad Ali Saeimi Sadigh et al.
MATERIALS & DESIGN (2016)
Aligning multilayer graphene flakes with an external electric field to improve multifunctional properties of epoxy nanocomposites
Shuying Wu et al.
CARBON (2015)
Low velocity impact of carbon fiber aluminum laminates
Guo-Cai Yu et al.
COMPOSITE STRUCTURES (2015)
Low-velocity impact response of fiberglass/magnesium FMLs with a new 3D fiberglass fabric
Zohreh Asaee et al.
COMPOSITE STRUCTURES (2015)
Investigation into the toughening mechanism of epoxy reinforced with multi-wall carbon nanotubes
Xiaoyan Li et al.
E-POLYMERS (2015)
The Effect of Hybridization on Thermal and Mechanical Properties of Glass/Oxidized PAN Fibers-Polymer Composites
Hossein Ebrahimnezhad-Khaljiri et al.
FIBERS AND POLYMERS (2015)
Fatigue life evaluation and crack detection of the adhesive joint with carbon nanotubes
Min-Hyo Kang et al.
COMPOSITE STRUCTURES (2014)
Low velocity impact response of fibre-metal laminates - A review
Gin Boay Chai et al.
COMPOSITE STRUCTURES (2014)
Impact Behaviour of GLAREs with MWCNT Modified Epoxy Resins
H. Zhang et al.
EXPERIMENTAL MECHANICS (2014)
Charpy impact response of basalt fiber reinforced epoxy and basalt fiber metal laminate composites: Experimental study
R. Eslami Farsani et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene-clay nanocomposites
Reza Eslami-Farsani et al.
MATERIALS & DESIGN (2014)
Effect of carbon nanotube enhanced adhesives on degradation of bonded joints in corrosive environments
G. Gkikas et al.
PLASTICS RUBBER AND COMPOSITES (2014)
Influence of Carbon Nanotubes on Epoxy Resin Cure Reaction Using Different Techniques: A Comprehensive Review
Luciana S. Cividanes et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Assessment of different higher order theories for low-velocity impact analysis of fibre-metal laminate cylindrical shells
A. Davar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2014)
Experimental investigation on distance effects in repeated low velocity impact on fiber-metal laminates
M. Yarmohammad Tooski et al.
COMPOSITE STRUCTURES (2013)
Effect of the carbon nanotube functionalization on flexural properties of multiscale carbon fiber/epoxy composites manufactured by VARIM
M. Sanchez et al.
COMPOSITES PART B-ENGINEERING (2013)
Monitoring the integrity of adhesive joints during fatigue loading using carbon nanotubes
Roham Mactabi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Hygrothermal ageing of adhesive joints with nanoreinforced adhesives and different surface treatments of carbon fibre/epoxy substrates
M. R. Gude et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
PSO algorithm for fundamental frequency optimization of fiber metal laminated panels
H. Ghashochi-Bargh et al.
STRUCTURAL ENGINEERING AND MECHANICS (2013)
Influence of Graphite and Carbon Nanotubes on the Mechanical and Electrical Properties of Cast Epoxy Composites
Clarissa F. M. de Souza et al.
ADVANCED MATERIALS FORUM VI, PTS 1 AND 2 (2013)
Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites
M. T. Kim et al.
COMPOSITES PART B-ENGINEERING (2012)
Impact resistance of fiber-metal laminates: A review
M. Sadighi et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)
Improved Adhesives Containing CNT/SP1 Nano Fillers
A. Wolf et al.
JOURNAL OF ADHESION (2012)
High-velocity impact behavior of glass fiber-reinforced polyester filled with nanoclay
Javad Moftakharian Esfahani et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Development of a ferromagnetic fibre metal laminate
G. P. McCombe et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Effect of carbon nanotube reinforcement on fracture strength of composite adhesive joints
Garrett L. Burkholder et al.
JOURNAL OF MATERIALS SCIENCE (2011)
The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer
T. H. Hsieh et al.
JOURNAL OF MATERIALS SCIENCE (2011)
A review: Fibre metal laminates, background, bonding types and applied test methods
Tamer Sinmazcelik et al.
MATERIALS & DESIGN (2011)
Ballistic impact experiments of metallic sandwich panels with aluminium foam core
Weihong Hou et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Effects of surface pre-treatment and void content on GLARE laminate process characteristics
Sang Yoon Park et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates
Suzhu Yu et al.
MATERIALS & DESIGN (2010)
Mechanical properties of multi-walled carbon nanotube/epoxy composites
Arash Montazeri et al.
MATERIALS & DESIGN (2010)
Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites
A. Godara et al.
CARBON (2009)
Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints
S. G. Prolongo et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steel
L. L. Zhai et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2008)
A critical review on nanotube and nanotube/nanoclay related polymer composite materials
Kin-tak Lau et al.
COMPOSITES PART B-ENGINEERING (2006)
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - A comparative study
FH Gojny et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
On the tensile and shear strength of nano-reinforced composite interfaces
SA Meguid et al.
MATERIALS & DESIGN (2004)
Ballistic impact of GLARE™ fiber-metal laminates
MSH Fatt et al.
COMPOSITE STRUCTURES (2003)
Share Paper
