Related references
Note: Only part of the references are listed.Hydraulic and thermal performances of metal foam and pin fin hybrid heat sink
Yongtong Li et al.
APPLIED THERMAL ENGINEERING (2020)
An experimental and numerical investigation of forced convection in high porosity aluminum foams subjected to jet array impingement in channel-flow
Prashant Singh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Natural convection heat transfer characteristics of TiO2-H2O nanofluids in a cavity filled with metal foam
Guiqing Wang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Enhancing the performance of aluminum foam heat sinks through integrated pin fins
Yongtong Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Comparison of Single-Phase Convection in Additive Manufactured Versus Traditional Metal Foams
Justin Broughton et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)
Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling
Jian Wang et al.
APPLIED ENERGY (2019)
Jet Impingement Heat Transfer Enhancement by Packing High-Porosity Thin Metal Foams Between Jet Exit Plane and Target Surface
Srivatsan Madhavan et al.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2019)
Performance of novel liquid-cooled porous heat sink via 3-D laser additive manufacturing
Po-Hsiang Tseng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Microencapsulated phase change material (MEPCM) saturated in metal foam as an efficient hybrid PCM for passive thermal management: A numerical and experimental study
W. Q. Li et al.
APPLIED THERMAL ENGINEERING (2019)
Effects of rotation angle and metal foam on natural convection of nanofluids in a cavity under an adjustable magnetic field
Cong Qi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)
Design and development of porous regenerator for Stirling cryocooler using additive manufacturing
K. Srinivasan et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)
Direct Simulation of Interstitial Heat Transfer Coefficient Between Paraffin and High Porosity Open-Cell Metal Foam
Yuanpeng Yao et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)
Enhanced Thermal Performance of Internal Y-Shaped Bifurcation Microchannel Heat Sinks With Metal Foams
Han Shen et al.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2018)
Transient performance of a PCM-based heat sink with a partially filled metal foam: Effects of the filling height ratio
Zi-Qin Zhu et al.
APPLIED THERMAL ENGINEERING (2018)
Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design
Liang Gong et al.
APPLIED THERMAL ENGINEERING (2018)
Natural convection in metal foam heat sinks with open slots
Shangsheng Feng et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)
Thermal and hydraulic performance enhancement of microchannel heat sinks utilizing porous substrates
Ali Ghahremannezhad et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Transpiration cooling for additive manufactured porous plates with partition walls
Gan Huang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter
Adeel Arshad et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Comparison of direct numerical simulation with volume-averaged method on composite phase change materials for thermal energy storage
Xiaohu Yang et al.
APPLIED ENERGY (2018)
Nano-encapsulated phase change material slurry (Nano-PCMS) saturated in metal foam: A new stable and efficient strategy for passive thermal management
Wenqiang Li et al.
ENERGY (2018)
Review on Heat Transfer Enhancement of Phase Change Materials (PCMs)
P. Sivasamy et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Investigation of the effect of aluminum porous fins on heat transfer
K. Bilen et al.
ENERGY (2017)
The lattice Boltzmann modeling on the nanofluid natural convective transport in a cavity filled with a porous foam
Huijin Xu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)
Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams
Beibei Shen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental investigation on buoyancy-induced convection in aluminum metal foams
Michele Barbieri et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2017)
Thermal Performance Analysis of Biporous Metal Foam Heat Sink
Yongtong Li et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)
Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review
Nasiru I. Ibrahim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Thermal and hydrodynamic performance of flow boiling through a heat exchanger filled with various metallic foam samples
Ahmed Kouidri et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)
Effect of aluminum-foam heat sink on inclined hot surface temperature in the case of free convection heat transfer
M. Paknezhad et al.
CASE STUDIES IN THERMAL ENGINEERING (2017)
Numerical analysis on the energy storage efficiency of phase change material embedded in finned metal foam with graded porosity
Feng Zhu et al.
APPLIED THERMAL ENGINEERING (2017)
Cumulative effects of using pin fin heat sink and porous metal foam on thermal management of lithium-ion batteries
Shahabeddin K. Mohammadian et al.
APPLIED THERMAL ENGINEERING (2017)
Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam
P. Zhang et al.
APPLIED ENERGY (2017)
Numerical analysis and comparison of the thermal performance enhancement methods for metal foam/phase change material composite
Feng Zhu et al.
APPLIED THERMAL ENGINEERING (2016)
Development of a new pressure drop correlation for open-cell foams based completely on theoretical grounds: Taking into account strut shape and geometric tortuosity
Amer Inayat et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Forchheimer forced convection in a rectangular channel partially filled with aluminum foam
Mehmet Sener et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)
Experimental investigation of convective heat transfer in an open-cell aluminum foams
A. Hamadouche et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)
Heat-transfer characteristics of aluminum-foam heat sinks with a solid aluminum core
Wei-Hung Shih et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Flow boiling visualization and heat transfer in metal-foam-filled mini tubes - Part II: Developing predictive methods for heat transfer coefficient and pressure drop
Gholamreza Bamorovat Abadi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Flow boiling visualization and heat transfer in metal-foam-filled mini tubes - Part I: Flow pattern map and experimental data
Gholamreza Bamorovat Abadi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Numerical investigation of thermal performance of PCM based heat sink using structured porous media as thermal conductivity enhancers
Krishnan Swaminathan Gopalan et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Electronic cooling using water flow in aluminum metal foam heat sink: Experimental and numerical approach
A. M. Bayomy et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Application of TCE-PCM based heat sinks for cooling of electronic components: A review
Santosh Kumar Sahoo et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
How to Study Thermal Applications of Open-Cell Metal Foam: Experiments and Computational Fluid Dynamics
Sven De Schampheleire et al.
MATERIALS (2016)
Buoyancy driven convection in open-cell metal foam using the volume averaging theory
Sven De Schampheleire et al.
APPLIED THERMAL ENGINEERING (2015)
Performance improvement of high power liquid-cooled heat sink via non-uniform metal foam arrangement
Kuan-Cheng Chen et al.
APPLIED THERMAL ENGINEERING (2015)
Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials
Baicun Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Development and numerical investigation of novel gradient-porous heat sinks
Baicun Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Heat transfer and optimization studies on layered porous stackings under an imposed pressure drop
Sumanth Dathathri et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)
Thermal development in open-cell metal foam: An experiment with constant wall heat flux
Nihad Dukhan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 1-Two-phase flow pattern visualization
Yu Zhu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 2-A flow-pattern based prediction method for heat transfer
Yu Zhu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Numerical modeling of heat transfer in open-cell micro-foam with phase change material
Xin Hu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Pore-scale and volume-averaged numerical simulations of melting phase change heat transfer in finned metal foam
Shangsheng Feng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Numerical investigation of pressure drop and heat transfer through reconstructed metal foams and comparison against experiments
Andrea Diani et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Analytical considerations of local thermal non-equilibrium conditions for thermal transport in metal foams
H. J. Xu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
A Review of Two-Phase Forced Cooling in Three-Dimensional Stacked Electronics: Technology Integration
Craig Green et al.
JOURNAL OF ELECTRONIC PACKAGING (2015)
Influence of Orientation and Radiative Heat Transfer on Aluminum Foams in Buoyancy-Induced Convection
Marijn Billiet et al.
MATERIALS (2015)
Effect of tube diameter on pressure drop characteristics of refrigerant-oil mixture flow boiling inside metal-foam filled tubes
Haitao Hu et al.
APPLIED THERMAL ENGINEERING (2014)
Modeling phase change material in micro-foam under constant temperature condition
Xin Hu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Metal foam hydrodynamics: Flow regimes from pre-Darcy to turbulent
Nihad Dukhan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
An experimental and numerical study of finned metal foam heat sinks under impinging air jet cooling
S. S. Feng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Experimental and numerical study on melting of phase change materials in metal foams at pore scale
Zhenqian Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Influence of tube diameter on heat transfer characteristics of refrigerant-oil mixture flow boiling in metal-foam filled tubes
Haitao Hu et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2014)
Long-domain simulation of flow in open-cell mesoporous metal foam and direct comparison to experiment
Ahmed S. Suleiman et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2014)
NUMERICAL OPTIMIZATION OF THE THERMAL PERFORMANCE OF A POROUS-MICROCHANNEL HEAT SINK
Tu-Chieh Hung et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2014)
Optimization of Design Parameters for a Sandwich-Distribution Porous-Microchannel Heat Sink
Tu-Chieh Hung et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2014)
Research progress of phase change materials (PCMs) embedded with metal foam (a review)
Jianqing Chen et al.
8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS (2014)
Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes
Yu Zhu et al.
APPLIED THERMAL ENGINEERING (2013)
Experimental analysis of upward flow boiling heat transfer in a channel provided with copper metallic foam
Brahim Madani et al.
APPLIED THERMAL ENGINEERING (2013)
Thermal performance of porous microchannel heat sink: Effects of enlarging channel outlet
Tu-Chieh Hung et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
Experimental investigations on thermal performance enhancement and effect of orientation on porous matrix filled PCM based heat sink
Rajesh Baby et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
Thermal performance analysis of porous-microchannel heat sinks with different configuration designs
Tu-Chieh Hung et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Air forced convection through metal foams: Experimental results and modeling
Simone Mancin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Effect of oil on two-phase pressure drop of refrigerant flow boiling inside circular tubes filled with metal foam
Haitao Hu et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2013)
Analysis of heat transfer in oscillating flow through a channel filled with metal foam using computational fluid dynamics
Mohsen Ghafarian et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)
Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin
W. Q. Li et al.
APPLIED THERMAL ENGINEERING (2012)
Foam height effects on heat transfer performance of 20 ppi aluminum foams
Simone Mancin et al.
APPLIED THERMAL ENGINEERING (2012)
Analytical considerations of flow boiling heat transfer in metal-foam filled tubes
Y. P. Du et al.
HEAT AND MASS TRANSFER (2012)
Experimental study on the two-phase pressure drop in copper foams
Xianbing Ji et al.
HEAT AND MASS TRANSFER (2012)
Ultralightweight Compact Heat Sinks With Metal Foams Under Axial Fan Flow Impingement
J. J. Kuang et al.
HEAT TRANSFER ENGINEERING (2012)
A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
Xiao-Hong Han et al.
HEAT TRANSFER ENGINEERING (2012)
Passive thermal management using metal foam saturated with phase change material in a heat sink
Z. G. Qu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)
Experimental study of air natural convection on metallic foam-sintered plate
Zhiguo Qu et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2012)
A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals
Y. Tian et al.
ENERGY (2011)
Thermal transport analysis in parallel-plate channel filled with open-celled metallic foams
H. J. Xu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2011)
Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy Walls
Liang Gong et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)
Thermal conductivity and contact resistance of metal foams
E. Sadeghi et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
Ultralight Metallic Microlattices
T. A. Schaedler et al.
SCIENCE (2011)
Numerical investigation of pressure drop reduction without surrendering heat transfer enhancement in partially porous channel
A. Zehforoosh et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)
The Effect of Thermal Contact Resistance at Porous-Solid Interfaces in Finned Metal Foam Heat Sinks
Christopher T. DeGroot et al.
JOURNAL OF ELECTRONIC PACKAGING (2010)
Buoyant Convection in Superposed Metal Foam and Water Layers
V. Kathare et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)
Numerical Analysis of Convective Heat Transfer From an Elliptic Pin Fin Heat Sink With and Without Metal Foam Insert
Hamid Reza Seyf et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)
Forced Convection Heat Transfer Enhancement by Porous Pin Fins in Rectangular Channels
Jian Yang et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)
C. Y. Zhao et al.
SOLAR ENERGY (2010)
Numerical Modelling of Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes
Wei Lu et al.
ADVANCED ENGINEERING MATERIALS (2009)
Experimental analysis of the pressure drop and heat transfer through metal foams used as volumetric receivers under concentrated solar radiation
C. Albanakis et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2009)
Modeling Forced Convection in Finned Metal Foam Heat Sinks
Christopher T. DeGroot et al.
JOURNAL OF ELECTRONIC PACKAGING (2009)
Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes
C. Y. Zhao et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)
Natural convection in metal foam strips with internal heat generation
G. Hetsroni et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2008)
Merits of employing foam encapsulated phase change materials for pulsed power electronics cooling applications
K. Lafdi et al.
JOURNAL OF ELECTRONIC PACKAGING (2008)
Natural Convection Heat Transfer Enhancements From a Cylinder Using Porous Carbon Foam: Experimental Study
Yorwearth L. Jamin et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)
The experimental exploration of embedding phase change materials with graphite nanofibers for the thermal management of electronics
Randy D. Weinstein et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)
Experimental study of forced convection in metallic porous block subject to a confined slot jet
Tzer-Ming Jeng et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2007)
Experimental investigation of the heat transfer characteristics of aluminum-foam heat sinks with restricted flow outlet
W. H. Shih et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2007)
Heat transfer measurements in metal foam subjected to constant heat flux
Nihad Dukhan et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)
Experimental study on the influence of foam porosity and pore size on the melting of phase change materials
K. Lafdi et al.
JOURNAL OF APPLIED PHYSICS (2007)
Effect of orientation for phase change material (PCM)-based heat sinks for transient thermal management of electric components
Xiang-Qi Wang et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)
Effect of the metal foam materials on the performance of methanol steam micro-reformer for fuel cells
Hao Yu et al.
APPLIED CATALYSIS A-GENERAL (2007)
Effects of surface area density of aluminum foams on thermal conductivity of aluminum foam-phase change material composites
Sung-Tae Hong et al.
ADVANCED ENGINEERING MATERIALS (2007)
Interstitial heat transfer coefficient and dispersion conductivity in compressed metal foam heat sinks
Sheng-Chung Tzeng et al.
JOURNAL OF ELECTRONIC PACKAGING (2007)
Forced convection of metallic foam heat sink under laminar slot jet confined by parallel wall
Tzer-Ming Jeng et al.
HEAT TRANSFER ENGINEERING (2007)
Open-cell aluminum foams filled with phase change materials as compact heat sinks
Sung-Tae Hong et al.
SCRIPTA MATERIALIA (2006)
A nonequilibrium finite-volume model for conjugate fluid/porous/solid domains
L Betchen et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2006)
Metal foam and finned metal foam heat sinks for electronics cooling in buoyancy-induced convection
A. Bhattacharya et al.
JOURNAL OF ELECTRONIC PACKAGING (2006)
Study of flow and heat transfer characteristics in asymmetrically heated sintered porous heat sinks with periodical baffles
Tzer-Ming Jeng et al.
JOURNAL OF ELECTRONIC PACKAGING (2006)
Height effect on heat-transfer characteristics of aluminum-foam heat sinks
W. H. Shih et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Pressure loss and forced convective heat transfer in an annulus filled with aluminum foam
JS Noh et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)
Sintered porous medium heat sink for cooling of high-power mini-devices
G Hetsroni et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2006)
Characteristics of oscillating flow through a channel filled with open-cell metal foam
KC Leong et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2006)
Thermal performance of aluminium-foam CPU heat exchangers
H. Mahdi et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2006)
Air flow through compressed and uncompressed aluminum foam: Measurements and correlations
Nihad Dukhan et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2006)
A two-temperature model for solid-liquid phase change in metal foams
S Krishnan et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)
Forced convective heat transfer across a pin fin micro heat sink
Y Peles et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Metal foam heat sink for transmission window
G Hetsroni et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Fluid flow and heat transfer in liquid cooled foam heat sinks for electronic packages
HY Zhang et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2005)
Natural convection in metal foams with open cells
CY Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
An experimental study of heat transfer in oscillating flow through a channel filled with an aluminum foam
KC Leong et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Computational aspects of effective thermal conductivity of highly porous metal foams
R Singh et al.
APPLIED THERMAL ENGINEERING (2004)
Energy efficient thermal management of electronic components using solid-liquid phase change materials
DW Yoo et al.
IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY (2004)
An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous media
BI Pavel et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Experimental investigation of heat-transfer characteristics of aluminum-foam heat sinks
WH Hsieh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Experimental and numerical investigation of forced convection heat transfer of air in non-sintered porous media
PX Jiang et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2004)
Simulations of flow through open cell metal foams using an idealized periodic cell structure
K Boomsma et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)
Metal foams as compact high performance heat exchangers
K Boomsma et al.
MECHANICS OF MATERIALS (2003)
Thermal performance of aluminum-foam heat sinks by forced air cooling
SY Kim et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2003)
PCM thermal control unit for portable electronic devices: Experimental and numerical studies
EM Alawadhi et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2003)
Calculation of turbulent flow and heat transfer in a porous-baffled channel
YT Yang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)
Analysis of microchannel heat sinks, for electronics cooling
CY Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Finned metal foam heat sinks for electronics cooling in forced convection
A Bhattacharya et al.
JOURNAL OF ELECTRONIC PACKAGING (2002)
Non-Darcy natural convection in high porosity metal foams
MS Phanikumar et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Thermophysical properties of high porosity metal foams
A Bhattacharya et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Measurement of interstitial convective heat transfer and frictional drag for flow across metal foams
JJ Hwang et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)
The effects of compression and pore size variations on the liquid flow characteristics in metal foams
K Boomsma et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2002)
Forced convection from aluminum foam materials in an asymmetrically heated channel
SY Kim et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
An experimental study of heat transfer of a porous channel subjected to oscillating flaw
HL Fu et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)
Forced convection in high porosity metal foams
VV Calmidi et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2000)
Flow and heat transfer correlations for porous fin in a plate-fin heat exchanger
SY Kim et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2000)
On the local thermal equilibrium in microchannel heat sinks
SJ Kim et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)
Effective thermal conductivity and permeability of aluminum foam materials
JW Paek et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2000)