Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete

This article presents the development of lightweight-foamed concrete with geopolymer technology by utilizing industrial wastes such as oil palm shell (OPS) as lightweight coarse aggregate, palm oil fuel ash (POFA) and low calcium fly ash (FA) as binders in the concrete. The main aim of this research is the assessment of morphology and mineralogy on oil palm shell foamed geopolymer concrete (OPSFGC) and POFA-FA geopolymer (PFG) paste, respectively. These evaluations were performed by using field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) analysis and Fourier transform infrared (FTIR) spectroscopy. Additionally, the compressive strength, water absorption and sorptivity of the geopolymer concrete were correlated with the foam volume. The results of the morphology of the OPSFGC confirm that a more dense and homogeneous geopolymer matrix is formed over the curing period, which results in higher compressive strength. Yet, concrete degradation tends to occur by the propagation of microcracks in the interfacial transition zone (ITZ). Further, the water absorption and sorptivity of OPSFGC show a positive correlation with the foam volume, which reduces concrete strength. Additionally, OPSFGC is able to achieve high early strength of up to 87% of its 28-day compressive strength owing to the oven curing. (C) 2016 Elsevier Ltd. All rights reserved.