Related references
Note: Only part of the references are listed.Electromagnetic and microwave absorption properties of Ti3SiC2 powders decorated with Ag particles
Yi Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Arc erosion mechanism of Ag-Ti3SiC2 material
Xiaochen Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The beauty and the deed of silver during arc erosion of Ag/Ti3AlC2 contacts
DanDan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
In situ fabrication of Ti-Al/Ti2AlC composite by hot-press sintering
Liangxiao Wei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Fabrication and mechanical properties of network structured titanium alloy matrix composites reinforced with Ti2AlC particulates
Faming Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure and mechanical properties of Ti2AlC particle and in-situ TiAl3 reinforced pure Al composites
Yue Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Anisotropic arc erosion resistance of Ag/Ti3AlC2 composites induced by the alignment of Ti3AlC2
Dan Dan Wang et al.
CORROSION SCIENCE (2020)
Reaction paths and microstructures of nickel and Ti2AlC mixtures hot pressed and annealed in the 1050-1350 °C temperature range
Wenzhen Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Ti2AlC triggered in-situ ultrafine TiC/Inconel 718 composites: Microstructure and enhanced properties
Wenqiang Hu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Self-lubricate and anisotropic wear behavior of AZ91D magnesium alloy reinforced with ternary Ti2AlC MAX phases
Wenbo Yu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Dry sliding behaviors and friction surface characterization of Ti3Al0.8Si0.2Sn0.2C2 solid solution against S45C steel
Leping Cai et al.
CERAMICS INTERNATIONAL (2019)
Active nonlinear partial-state feedback control of contacting force for a pantograph-catenary system
Bing Zhu et al.
ISA TRANSACTIONS (2019)
Optimizing the microstructure and mechanical behaviors of in-situ TiC-γ′/Ni composites by subsequent thermal treatment
Wenqiang Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructural characterization and abrasive wear resistance of a high chromium white iron composite reinforced with in situ formed TiCx
Jipeng Jiang et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
A Chemiluminescent Method for the Detection of H2O2 and Glucose Based on Intrinsic Peroxidase-Like Activity of WS2 Quantum Dots
Mahsa Haddad Irani-nezhad et al.
MOLECULES (2019)
Corrosion and degradation mechanism of Ag/Ti3AlC2 composites under dynamic electric arc discharge
Jianxiang Ding et al.
CORROSION SCIENCE (2019)
Anisotropic properties of Ag/Ti3AlC2 electrical contact materials prepared by equal channel angular pressing
DanDan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
In situ formed TiCx in high chromium white iron composites: Formation mechanism and influencing factors
Jipeng Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
An investigation into the microstructure and mechanical properties of V2AlC MAX phase prepared by microwave sintering
Mohsen Hossein-Zadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
W. H. Yu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
A review on the production of metal matrix composites through stir casting - Furnace design, properties, challenges, and research opportunities
Ramanathan Arunachalam et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Hierarchically structured ternary heterojunctions based on Ce3+ / Ce4+ modified Fe3O4 nanoparticles anchored onto graphene oxide sheets as magnetic visible-light-active photocatalysts for decontamination of oxytetracycline
Ramin Hassandoost et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
Development of Pore-Free Ti-Si-C MAX/Al-Si Composite Materials Manufactured by Squeeze Casting Infiltration
Anna Dmitruk et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
A review on the applications of ultrasonic technology in membrane bioreactors
Samira Arefi-Oskoui et al.
ULTRASONICS SONOCHEMISTRY (2019)
In situ Ti2AlN reinforced TiAl-based composite with a novel network structure: Microstructure and flexural property at elevated temperatures
Daqun Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High temperature damping behavior and dynamic Young's modulus of magnesium matrix composite reinforced by Ti2AlC MAX phase particles
Wenbo Ye et al.
MECHANICS OF MATERIALS (2019)
Tribological and corrosion behavior of flame sprayed Al-10 wt% Ti3SiC2 composite coating on carbon steel
R. Jamshidi et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of graphene dispersion and interfacial bonding on the mechanical properties of metal matrix composites: An overview
Hanieh Ghodrati et al.
FLATCHEM (2019)
Physical, mechanical, and ablation properties of Cu-Ti3AlC2 composites with various Ti3AlC2 contents
Xiaochen Huang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Al alloy/Ti3SiC2 composites fabricated by pressureless infiltration with melt-spun Al alloy ribbons
Chaolan Zhou et al.
CERAMICS INTERNATIONAL (2018)
Fabrication and microstructure of a new ternary solid solution of T(i)3Al(0.8)Si(0.2)Sn(0.2)C(2) with high solid solution strengthening effect
Leping Cai et al.
CERAMICS INTERNATIONAL (2018)
Temperature-driven deintercalation and structure evolution of Ag/Ti3AlC2 composites
Manmen Liu et al.
CERAMICS INTERNATIONAL (2018)
Processing, microstructure and mechanical properties of in-situ Ti3Al+TiAl matrix composite reinforced with Ti2AlC particles prepared by centrifugal casting
J. Lapin et al.
INTERMETALLICS (2018)
Anisotropic mechanical and physical properties in textured Ti2AlC reinforced AZ91D magnesium composite
Wenbo Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure and mechanical properties of the TiN particles reinforced IN718C composite
Rui Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Study of the interfacial reaction between Ti3SiC2 particles and Al matrix
Jiangbo Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
In-situ TiC and γ′-Ni3(Al,Ti) triggered microstructural modification and strengthening of Ni matrix composite by reactive hot-press sintering pure Ni and Ti2AlC precursor
Wenqiang Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Synthesis and characterization of textured Ti2AlC reinforced magnesium composite
Wenbo Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Exploring the interfacial state and tensile behaviors in nickel matrix composite with in-situ TiC and γ′-Ni3(Al,Ti) reinforcements
Wenqiang Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Arc erosion behavior of Ag/Ti3AlC2 electrical contact materials
J. Ding et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructural characterization and mechanical properties of a novel TiC-based cermet bonded with Ni3(Al,Ti) and NiAl duplexalloy
Wenqiang Hu et al.
MATERIALS CHARACTERIZATION (2018)
Effects of in situ formed TiCx on the microstructure, mechanical properties and abrasive wear behavior of a high chromium white iron
Jipeng Jiang et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Ag/Ti3AlC2 composites with high hardness, high strength and high conductivity
Manmen Liu et al.
MATERIALS LETTERS (2018)
Microstructure, tribological and mechanical properties of Al7075 / Ti3AlC2 MAX-phase surface composite produced by friction stir processing
Saeed Ahmadifard et al.
VACUUM (2018)
Spark plasma sintering of TiAl-Ti3AlC2 composite
Maryam Akhlaghi et al.
CERAMICS INTERNATIONAL (2018)
Fabrication methods of particulate reinforced Aluminium metal matrix composite-A review
Narender Panwar et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Microstructural, mechanical and tribological properties of Al matrix composites reinforced with Cu coated Ti3AlC2
Shuai Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Relation of microstructure, microhardness and underlying thermodynamics in molten pools of laser melting deposition processed TiC/Inconel 625 composites
Sainan Cao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of in situ formed TiCx grains on the microstructural modification of high chromium white iron
Jipeng Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure, mechanical properties and fracture mechanism of Ti2AlC reinforced AZ91D composites fabricated by stir casting
Wenbo Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Sintering and properties of mechanical alloyed Ti3AlC2-Cu composites
Wenjuan Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of carbon reactant on microstructures and mechanical properties of TiAl/Ti2AlC composites
Xiaojie Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Preparation and mechanical properties of TiCx-Ni3(Al,Ti)/Ni composites synthesized from Ni alloy and Ti3AlC2 powders
Wenqiang Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Tensile properties and fracture behavior of in-situ synthesized Ti2AlN/Ti48Al2Cr2Nb composites at room and elevated temperatures
Yiwen Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Synthesis and characterization of the mechanical properties of Ti3SiC2/Mg and Cr2AlC/Mg alloy composites
Matt Nelson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Synthesis and tribological behavior of novel Ag- and Bi-based composites reinforced with Ti3SiC2
F. AlAnazi et al.
WEAR (2017)
Spherical nanoindentation, modeling and transmission electron microscopy evidence for ripplocations in Ti3SiC2
Justin Griggs et al.
ACTA MATERIALIA (2017)
Influence of Cu on the mechanical and tribological properties of Ti3SiC2
Wentao Dang et al.
CERAMICS INTERNATIONAL (2016)
Ti3SiC2 Reinforced ZA27 Alloy Composites with Enhanced Mechanical Properties
Hai-Yan Li et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2016)
Stability of V2AlC with Al in 800-1000 °C temperature range and in situ synthesis of V2AlC/Al composites
Matthias T. Agne et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Preparation and mechanical properties of TiCx-(NiCu)3Al-CuNi2Ti-Ni hybrid composites by reactive pressureless sintering pre-alloyed Cu/Ti3AlC2 and Ni as precursor
Wenjuan Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Energy damping in magnesium alloy composites reinforced with TiC or Ti2AlC particles
Babak Anasori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Compressive performance and crack propagation in Al alloy/Ti2AlC composites
D. A. H. Hanaor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C
Yi-wen Liu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Evidence for Bulk Ripplocations in Layered Solids
Jacob Gruber et al.
SCIENTIFIC REPORTS (2016)
High-Performance Metal/Carbide Composites with Far-From-Equilibrium Compositions and Controlled Microstructures
Liangfa Hu et al.
SCIENTIFIC REPORTS (2016)
Microstructure and mechanical properties of Zn based composites reinforced by Ti3AlC2
H. -Y. Li et al.
ADVANCES IN APPLIED CERAMICS (2015)
Strengthening and tribological surface self-adaptability of Ti3AlC2 by incorporation of Sn to form Ti3Al(Sn)C2 solid solutions
Zhenying Huang et al.
CERAMICS INTERNATIONAL (2015)
Tensile behavior and strengthening mechanism in ultrafine TiC0.5 particle reinforced Cu-Al matrix composites
Mengqi Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Low-Temperature Synthesis and Characterization of Ti2AlC/TiAl in situ Composites via a Reaction Hot-Pressing Process in the Ti3AlC2-Ti-Al System
Taotao Ai et al.
METALS AND MATERIALS INTERNATIONAL (2015)
Tribological Properties of TiAl Matrix Self-Lubricating Composites Containing Multilayer Graphene and Ti3SiC2 at High Temperatures
Zengshi Xu et al.
TRIBOLOGY TRANSACTIONS (2015)
Fabrication, Mechanical Properties, and Tribological Behaviors of Ti3Al0.8Sn0.4C2 Solid Solution by Two-Time Hot-Pressing Method
Hao Xu et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)
Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
Hooyar Attar et al.
ACTA MATERIALIA (2014)
Microstructure Characterization and Mechanical Properties of In Situ Synthesized Ti2AlN/Ti48Al2Cr2Nb Composites
Yiwen Liu et al.
ADVANCED ENGINEERING MATERIALS (2014)
Microstructural and mechanical properties of dual Ti3A1C2 -Ti2AlC reinforced TiAl composites fabricated by reaction hot pressing
Taotao Ai et al.
CERAMICS INTERNATIONAL (2014)
Microstructure and mechanical properties of in situ TiAl/Ti2AlC composites prepared by reactive hot pressing
Chen-hui Yang et al.
CERAMICS INTERNATIONAL (2014)
Microstructural characterization and compression properties of TiC0.61/Cu(Al) composite synthesized from Cu and Ti3AlC2 powders
Zhenying Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Preparation and mechanical properties of in situ TiCx-Ni (Si, Ti) alloy composites
Wenjuan Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti2AlC particles
Babak Anasori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mechanical response of discontinuous ceramic fiber reinforced metal matrix composites under quasi-static and dynamic loadings
B. McWilliams et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Evaluation of fatigue and impact behavior of titanium carbide reinforced metal matrix composites
V. Sivananth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A novel Ni2AlTi-containing composite with excellent wear resistance and anomalous flexural strength
H. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The microstructure and tensile properties of the Ti2AlC reinforced TiAl composites fabricated by powder metallurgy
Hongfei Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Processing, microstructural characterization and mechanical properties of in situ Ti3AlC2/TiAl3 composite by hot pressing
Taotao Ai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Current-Activated, Pressure-Assisted Infiltration: A Novel, Versatile Route for Producing Interpenetrating Ceramic-Metal Composites
Liangfa Hu et al.
MATERIALS RESEARCH LETTERS (2014)
Tailoring of the thermal expansion of Cr2(Alx,Ge1-x)C phases
Thierry Cabioch et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Reactive hot pressing and mechanical properties of TiAl3/Ti3AlC2/Al2O3 in situ composite
Weiping Chen et al.
MATERIALS & DESIGN (2013)
Microstructural characteristics and evolution of Ti2AlN/TiAl composites with a network reinforcement architecture during reaction hot pressing process
Yi Zhou et al.
MATERIALS CHARACTERIZATION (2013)
Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joints brazed using Ag-Cu filler alloy
J. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Mechanically alloyed nanocomposites
C. Suryanarayana et al.
PROGRESS IN MATERIALS SCIENCE (2013)
A TiCx reinforced Fe (Al) matrix composite using in-situ reaction
Xinhua Chen et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2013)
Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction
Shili Shu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Nanocrystalline Mg-MAX composites: Mechanical behavior characterization via acoustic emission monitoring
Antonios Kontsos et al.
ACTA MATERIALIA (2011)
Progress in research and development on MAX phases: a family of layered ternary compounds
Z. M. Sun
INTERNATIONAL MATERIALS REVIEWS (2011)
In situ diffraction study of thermal decomposition in Maxthal Ti2AlC
W. K. Pang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Temperature-Dependent Crystal Structures of Ti2AlN and Cr2GeC as Determined from High Temperature Neutron Diffraction
Nina J. Lane et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
High-temperature thermal stability of Ti2AlN and Ti4AlN3 A comparative diffraction study
I. M. Low et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Microstructure and mechanical properties of Al-Al2O3 micro and nano composites fabricated by stir casting
S. A. Sajjadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites
W. J. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
On the tribology of the MAX phases and their composites during dry sliding: A review
S. Gupta et al.
WEAR (2011)
Effect of spark plasma sintering temperature on the microstructure and mechanical properties of a Ti2AlC/TiAl composite
F. Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Characterization of Stir Cast Al-Cu-(fly ash plus SiC) Hybrid Metal Matrix Composites
K. V. Mahendra et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
In Situ High-Temperature Diffraction Study of the Thermal Dissociation of Ti3AlC2 in Vacuum
Wei-Kong Pang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)
On the effect of texture on the mechanical and damping properties of nanocrystalline Mg-matrix composites reinforced with MAX phases
Shahram Amini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructure and mechanical behaviors of in situ TiC particulates reinforced Ni matrix composites
Zong-de Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Processing, microstructural characterization and mechanical properties of a Ti2AlC/nanocrystalline Mg-matrix composite
Shahram Amini et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Thermal expansion of select M > n+1 > AX > n (M=early transition metal, A=A group element, X=C or N) phases measured by high temperature x-ray diffraction and dilatometry
T. H. Scabarozi et al.
JOURNAL OF APPLIED PHYSICS (2009)
On spherical nanoindentations, kinking nonlinear elasticity of mica single crystals and their geological implications
S. Basu et al.
JOURNAL OF STRUCTURAL GEOLOGY (2009)
On the Stability of Mg Nanograins to Coarsening after Repeated Melting
Shahram Amini et al.
NANO LETTERS (2009)
Kinking Nonlinear Elasticity and the Deformation of Magnesium
A. G. Zhou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Study of tribofilms formed during dry sliding of Ta2AlC/Ag or Cr2AlC/Ag composites against Ni-based superalloys and Al2O3
S. Gupta et al.
WEAR (2009)
Kinking nonlinear elasticity, damping and microyielding of hexagonal close-packed metals
A. G. Zhou et al.
ACTA MATERIALIA (2008)
In-situ reaction synthesis and decomposition of Ta2AlC
Chunfeng Hu et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2008)
Reversible dislocation motion under contact loading in LiNbO3 single crystal
Sandip Basu et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Microstructure, mechanical, and electrical properties of Cu-Ti3AlC2 and in situ Cu-TiCx composites
J. Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Experiments and modeling of spark plasma sintered, functionally graded boron carbide-aluminum composites
Dustin M. Hulbert et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Deformation micromechanisms of ZnO single crystals as determined from spherical nanoindentation stress-strain curves
Sandip Basu et al.
JOURNAL OF MATERIALS RESEARCH (2007)
Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu-Ti3AlC2 composites
J. Zhang et al.
ACTA MATERIALIA (2007)
Ta2AlC and Cr2AlCAg-based composites -: New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina
S. Gupta et al.
WEAR (2007)
Fabrication and properties of Ti3AlC2 particulates reinforced copper composites
Liangming Peng
SCRIPTA MATERIALIA (2007)
Spherical nanoindentation and deformation mechanisms in freestanding GaN films
Sandip Basu et al.
JOURNAL OF APPLIED PHYSICS (2007)
Oxide-film-dependent tribological behaviors of Ti3SiC2
Zhenying Huang et al.
WEAR (2007)
Interformational exfoliation of Ti3AlC2 induced by Cu
Mingxing Ai et al.
HIGH-PERFORMANCE CERAMICS IV, PTS 1-3 (2007)
Composites by aluminum infiltration of porous silicon carbide derived from wood precursors
T. E. Wilkes et al.
SCRIPTA MATERIALIA (2006)
Tribological behaviors of bulk Ti3SiC2 and influences of TiC impurities
Hongxiang Zhai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Sapphire: A kinking nonlinear elastic solid
S Basu et al.
JOURNAL OF APPLIED PHYSICS (2006)
Metal matrix composites - From science to technological significance
DB Miracle
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Tribophysical properties of polycrystalline bulk Ti3AlC2
HX Zhai et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Electrical transport, thermal transport, and elastic properties of M2AlC (M=Ti, Cr, Nb, and V) -: art. no. 115120
JD Hettinger et al.
PHYSICAL REVIEW B (2005)
Synthesis of TiC/Ti-Cu composites by pressureless reactive infiltration of TiCu alloy into carbon preforms fabricated by 3D-printing
CR Rambo et al.
MATERIALS LETTERS (2005)
Microscale modeling of kinking nonlinear elastic solids
MW Barsoum et al.
PHYSICAL REVIEW B (2005)
Dynamic elastic hysteretic solids and dislocations
MW Barsoum et al.
PHYSICAL REVIEW LETTERS (2005)
Advances in manufacturing boron carbide-aluminum composites
JW Jung et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
Kink bands, nonlinear elasticity and nanoindentations in graphite
MW Barsoum et al.
CARBON (2004)
Oxidation layer in sliding friction surface of high-purity Ti3SiC2
HX Zhai et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Review of recent studies in magnesium matrix composites
HZ Ye et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Effect of reinforcement connectivity on the elasto-plastic behavior of aluminum composites containing sub-micron alumina particles
M Kouzeli et al.
ACTA MATERIALIA (2003)
Reactions between Al and Ti3SiC2 in temperature range of 600-650 °C
WL Gu et al.
SCRIPTA MATERIALIA (2003)
Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1GPa
MW Barsoum et al.
NATURE MATERIALS (2003)
Investigation of TiAl/Ti2AlC composites prepared by spark plasma sintering
BC Mei et al.
MATERIALS CHEMISTRY AND PHYSICS (2002)
Application of the Arrhenius equation to solid state kinetics: can this be justified?
AK Galwey et al.
THERMOCHIMICA ACTA (2002)
Microstructure and mechanical properties of TiAl/Ti2AlN composites prepared by combustion synthesis
A Kakitsuji et al.
MATERIALS TRANSACTIONS (2001)
Reaction of Al with Ti3SiC2 in the 800-1000°C temperature range
T El-Raghy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Synthesis and characterization of Hf2PbC, Zr2PbC and M2SnC (M = Ti, Hf, Nb or Zr)
T El-Raghy et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)
Microstructural and mechanical characteristics of in situ metal matrix composites
SC Tjong et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
Influence of small amounts of Fe and V on the synthesis and stability of Ti3SiC2
N Tzenov et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)
Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite
RA Saravanan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
