Related references
Note: Only part of the references are listed.Design of Experiment (DOE) Analysis of 5-Cell Stack Fuel Cell Using Three Bipolar Plate Geometry Designs
Tabbi Wilberforce et al.
SUSTAINABILITY (2020)
Performance Prediction of Proton Exchange Membrane Fuel Cells (PEMFC) Using Adaptive Neuro Inference System (ANFIS)
Tabbi Wilberforce et al.
SUSTAINABILITY (2020)
Comprehensive investigation on hydrogen and fuel cell technology in the aviation and aerospace sectors
Ahmad Baroutaji et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)
O. S. Ijaodola et al.
ENERGY (2019)
A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells
Tabbi Wilberforce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Numerical modelling and CFD simulation of a polymer electrolyte membrane (PEM) fuel cell flow channel using an open pore cellular foam material
Tabbi Wilberforce et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
Technical evaluation of proton exchange membrane (PEM) fuel cell performance - A review of the effects of bipolar plates coating
Tabbi Wilberforce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Effect of humidification of reactive gases on the performance of a proton exchange membrane fuel cell
Tabbi Wilberforce et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
An analysis of PEM water electrolysis cells operating at elevated current densities
A. Villagra et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Physical modeling of chemical membrane degradation in polymer electrolyte membrane fuel cells: Influence of pressure, relative humidity and cell voltage
Georg A. Futter et al.
JOURNAL OF POWER SOURCES (2019)
Sol-gel preparation of Ag-silica nanocomposite with high electrical conductivity
Zhijun Ma et al.
APPLIED SURFACE SCIENCE (2018)
Electrode parameters and operating conditions influencing the performance of anion exchange membrane fuel cells
Annika Carlson et al.
ELECTROCHIMICA ACTA (2018)
The role of flow-field layout on the conditioning of a proton exchange membrane fuel cell
Ibrahim Alaefour et al.
FUEL (2018)
Enhancement of fuel cell properties in polyethersulfone and sulfonated poly (ether ether ketone) membranes using metal oxide nanoparticles for proton exchange membrane fuel cell
S. Elakkiya et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Investigation of the effect of charge transfer coefficient (CTC) on the operating voltage of polymer electrolyte membrane (PEM) electrolyzer
Alhassan Salami Tijani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Effective factors improving catalyst layers of PEM fuel cell
Gokce S. Avcioglu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Pore structure and effective diffusion coefficient of catalyzed electrodes in polymer electrolyte membrane fuel cells
Jian Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Analysis of proton exchange membrane fuel cells voltage drops for different operating parameters
Khalil Benmouiza et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Homogenization of current density of PEM fuel cells by in-plane graded distributions of platinum loading and GDL porosity
Lei Xing et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Channel to rib width ratio influence with various flow field designs on performance of PEM fuel cell
Youcef Kerkoub et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Effects of gas diffusion layer deformation on the transport phenomena and performance of PEM fuel cells with interdigitated flow fields
Shian Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification
Pranay Shrestha et al.
JOURNAL OF POWER SOURCES (2018)
Evaluating the Effect of Metal Bipolar Plate Coating on the Performance of Proton Exchange Membrane Fuel Cells
Oluwatosin Ijaodola et al.
ENERGIES (2018)
Investigation of parameter effects on the performance of high-temperature PEM fuel cell
Lingchao Xia et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Experimental study on self-humidified operation in PEM fuel cells
K. Subin et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2018)
Effect of number and arrangement of separator electrode assembly (SEA) on the performance of square tubular PEM fuel cells
Akbar Mohammadi-Ahmar et al.
ENERGY (2017)
An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor
E. Afshari et al.
ENERGY (2017)
Study on the operating pressure effect on the performance of a proton exchange membrane fuel cell power system
Yanzhou Qin et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Multi-objective optimization of operating conditions and channel structure for a proton exchange membrane fuel cell
Zhichun Liu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Modeling and analysis of internal water transfer behavior of PEM fuel cell of large surface area
Po Hong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of pressure difference between adjacent channels in an adjustable flow field in PEM fuel cells
Shizhong Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Graphene as corrosion protection for metal foam flow distributor in proton exchange membrane fuel cells
Yi-Husan Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Development of Bi-polar plate design of PEM fuel cell using CFD techniques
Tabbi Wilberforce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Overall and local effects of operating conditions in PEM fuel cells with dead-ended anode
Yupeng Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Modelling and simulation of Proton Exchange Membrane fuel cell with serpentine bipolar plate using MATLAB
Tabbi Wilberforce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Developments of electric cars and fuel cell hydrogen electric cars
Tabbi Wilberforce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Numerical modelling of in-line and staggered blockages in parallel flowfield channels of PEM fuel cells
Hadi Heidary et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Investigation of GDL compression effects on the performance of a PEM fuel cell cathode by lattice Boltzmann method
G. R. Molaeimanesh et al.
JOURNAL OF POWER SOURCES (2017)
Evaluation of porosity and thickness on effective diffusivity in gas diffusion layer
Yuan Gao et al.
JOURNAL OF POWER SOURCES (2017)
Influence of various carbon nano-forms as supports for Pt catalyst on proton exchange membrane fuel cell performance
Abha Bharti et al.
JOURNAL OF POWER SOURCES (2017)
Temperature control of open-cathode PEM fuel cells
Stephan Strahl et al.
IFAC PAPERSONLINE (2017)
Determination of operating parameters for PEM fuel cell using support vector machines approach
Xiongbin Peng et al.
JOURNAL OF ENERGY STORAGE (2017)
The effects of flow-field orientation on water management in PEM fuel cells with serpentine channels
Moosa Ashrafi et al.
APPLIED ENERGY (2017)
Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions
Jundika C. Kurnia et al.
APPLIED ENERGY (2017)
Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells
Ebrahim Afshari et al.
JOURNAL OF THE ENERGY INSTITUTE (2017)
Transport in Proton Exchange Membranes for Fuel Cell ApplicationsA Systematic Non-Equilibrium Approach
Angie L. Rangel-Cardenas et al.
MATERIALS (2017)
A Study of influence on sulfonated TiO2-Poly (Vinylidene fluoride-co-hexafluoropropylene) nano composite membranes for PEM Fuel cell application
K. Selva Kumar et al.
APPLIED SURFACE SCIENCE (2017)
Computational analysis on the electrode geometric parameters for the reversible solid oxide cells
Seoung-Ju Lee et al.
ELECTROCHIMICA ACTA (2017)
Membrane degradation model for 3D CFD analysis of fuel cell performance as a function of time
L. Karpenko-Jereb et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
The effects of the composition of microporous layers on the permeability of gas diffusion layers used in polymer electrolyte fuel cells
O. M. Orogbemi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Investigation of the local temperature and overheat inside the membrane electrode assembly of PEM fuel cell
V. A. Raileanu Ilie et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Advances in stationary and portable fuel cell applications
Tabbi Wilberforce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Modeling the effect of membrane conductivity on the performance of alkaline fuel cells
Isaac P. Raya et al.
JOURNAL OF POWER SOURCES (2016)
Effects of operation temperature and reactant gas humidity levels on performance of PEM fuel cells
Dilek Nur Ozen et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Permeability and diffusion coefficients of single methyl lactate enantiomers in Nafion® and cellophane membranes measured in diffusion cell
S. Hovorka et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2016)
Experimental study of mass transport in PEMFCs: Through plane permeability and molecular diffusivity in GDLs
Prafful Mangal et al.
ELECTROCHIMICA ACTA (2015)
Investigating design parameter effects on the methanol flux in the passive storage of a direct methanol fuel cell
M. Z. F. Kamaruddin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Modelling and simulation of a proton exchange membrane (PEM) electrolyser cell
Z. Abdin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Mechanical properties and influence of straining on ion conductivity of perfluorosulfonic acid Nafion®-type membranes depending on water uptake
Ekaterina Safronova et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
Optimum design parameters and operating condition for maximum power of a direct methanol fuel cell using analytical model and genetic algorithm
M. Tafaoli-Masoule et al.
ENERGY (2014)
The role of hydrogen and fuel cells to store renewable energy in the future energy network - potentials and challenges
Seyyed Mohsen Mousavi Ehteshami et al.
ENERGY POLICY (2014)
Deformation of PEM fuel cell gas diffusion layers under compressive loading: An analytical approach
Vahid Norouzifard et al.
JOURNAL OF POWER SOURCES (2014)
A segmented cell approach for studying the effects of serpentine flow field parameters on PEMFC current distribution
Tatyana V. Reshetenko et al.
ELECTROCHIMICA ACTA (2013)
Water transport characteristics of a PEM fuel cell at various operating pressures and temperatures
Erni Misran et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Cost effective cation exchange membranes: A review
R. S. L. Yee et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)
Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review
A. P. Manso et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Proton transport, water uptake and hydrogen permeability of nanoporous hematite ceramic membranes
M. T. Colomer
JOURNAL OF POWER SOURCES (2011)
Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell
J. G. Carton et al.
ENERGY (2010)
Effect of membrane thickness on the performance and efficiency of passive direct methanol fuel cells
JG Liu et al.
JOURNAL OF POWER SOURCES (2006)
Share Paper
