Related references
Note: Only part of the references are listed.Rational Design of Porous N-Ti3C2 MXene@CNT Microspheres for High Cycling Stability in Li-S Battery
Jianli Wang et al.
NANO-MICRO LETTERS (2020)
Synthesis and characterization of a sulfur/TiO2 composite for Li-S battery
Zhen-jiang He et al.
IONICS (2019)
Scalable Manufacturing of Large and Flexible Sheets of MXene/Graphene Heterostructures
Meng-Qiang Zhao et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Manipulating Polysulfide Conversion with Strongly Coupled Fe3O4 and Nitrogen Doped Carbon for Stable and High Capacity Lithium-Sulfur Batteries
Ke Lu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Efficient polysulfides anchoring for Li-S batteries: Combined physical adsorption and chemical conversion in V2O5 hollow spheres wrapped in nitrogen-doped graphene network
Xiao-Tian Gao et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Synchronous Gains of Areal and Volumetric Capacities in Lithium-Sulfur Batteries Promised by Flower-like Porous Ti3C2Tx Matrix
Zhubing Xiao et al.
ACS NANO (2019)
Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium-sulfur batteries
Jianjun Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Lightweight Reduced Graphene Oxide@MoS2 Interlayer as Polysulfide Barrier for High-Performance Lithium-Sulfur Batteries
Lei Tan et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Peaked dielectric responses in Ti3C2 MXene nanosheets enabled composites with efficient microwave absorption
Heng Luo et al.
JOURNAL OF APPLIED PHYSICS (2018)
Nitrogen-Doped Graphene-Supported Mixed Transition-Metal Oxide Porous Particles to Confine Polysulfides for Lithium-Sulfur Batteries
Qian Sun et al.
ADVANCED ENERGY MATERIALS (2018)
Facile Synthesis of Crumpled Nitrogen-Doped MXene Nanosheets as a New Sulfur Host for Lithium-Sulfur Batteries
Weizhai Bao et al.
ADVANCED ENERGY MATERIALS (2018)
Layer-by-layer assembly of MXene and carbon nanotubes on electrospun polymer films for flexible energy storage
Zehang Zhou et al.
NANOSCALE (2018)
Boosting the Electrochemical Performance of Li-S Batteries with a Dual Polysulfides Confinement Strategy
Yu Yao et al.
SMALL (2018)
Amorphous MoS3 as the sulfur-equivalent cathode material for room-temperature Li-S and Na-S batteries
Hualin Ye et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Hierarchical porous C/MnO2 composite hollow microspheres with enhanced supercapacitor performance
Tao Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Nitrogen-doped Ti3C2Tx MXene electrodes for high-performance supercapacitors
Yangyang Wen et al.
NANO ENERGY (2017)
Graphene oxide quantum dot-derived nitrogen-enriched hybrid graphene nanosheets by simple photochemical doping for high-performance supercapacitors
Yongjie Xu et al.
APPLIED SURFACE SCIENCE (2017)
Confined Sulfur in 3D MXene/Reduced Graphene Oxide Hybrid Nanosheets for Lithium-Sulfur Battery
Weizhai Bao et al.
CHEMISTRY-A EUROPEAN JOURNAL (2017)
Reverse Microemulsion Synthesis of Sulfur/Graphene Composite for Lithium/Sulfur Batteries
Mohammad Rejaul Kaiser et al.
ACS NANO (2017)
Strings of Porous Carbon Polyhedrons as Self-Standing Cathode Host for High-Energy-Density Lithium-Sulfur Batteries
Yazhi Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Scalable Synthesis of Honeycomb-like Ordered Mesoporous Carbon Nanosheets and Their Application in Lithium-Sulfur Batteries
Seung-Keun Park et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Facile Solid-State Growth of 3D Well-Interconnected Nitrogen-Rich Carbon Nanotube-Graphene Hybrid Architectures for Lithium-Sulfur Batteries
Yuan-Li Ding et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
3D Metal Carbide@Mesoporous Carbon Hybrid Architecture as a New Polysulfide Reservoir for Lithium-Sulfur Batteries
Weizhai Bao et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
High Sulfur Loading in Hierarchical Porous Carbon Rods Constructed by Vertically Oriented Porous Graphene-Like Nanosheets for Li-S Batteries
Zongmin Zheng et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Rational Design of Si/SiO2@Hierarchical Porous Carbon Spheres as Efficient Polysulfide Reservoirs for High-Performance Li-S Battery
Sarish Rehman et al.
ADVANCED MATERIALS (2016)
Designing high-energy lithium-sulfur batteries
Zhi Wei Seh et al.
CHEMICAL SOCIETY REVIEWS (2016)
Graphene-like g-C3N4 nanosheets/sulfur as cathode for lithium-sulfur battery
Zhen Meng et al.
ELECTROCHIMICA ACTA (2016)
Synthesis of high-performance LiMnPO4/C/rGO composite via a mechanical-activation-assisted polyol process
Jianguo Duan et al.
IONICS (2016)
A melamine-assisted chemical blowing synthesis of N-doped activated carbon sheets for supercapacitor application
Yiliang Wang et al.
JOURNAL OF POWER SOURCES (2016)
Sulfur Cathodes Based on Conductive MXene Nanosheets for High-Performance Lithium-Sulfur Batteries
Xiao Liang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Slurryless Li2S/Reduced Graphene Oxide Cathode Paper for High-Performance Lithium Sulfur Battery
Chao Wang et al.
NANO LETTERS (2015)
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium-Sulfur Batteries
Qianfan Zhang et al.
NANO LETTERS (2015)
Nanomaterials: Science and applications in the lithium-sulfur battery
Lin Ma et al.
NANO TODAY (2015)
SiO2-coated sulfur particles with mildly reduced graphene oxide as a cathode material for lithium-sulfur batteries
Brennan Campbell et al.
NANOSCALE (2015)
Tailoring Pore Size of Nitrogen-Doped Hollow Carbon Nanospheres for Confining Sulfur in Lithium-Sulfur Batteries
Weidong Zhou et al.
ADVANCED ENERGY MATERIALS (2015)
Fabrication of layered Ti3C2 with an accordion-like structure as a potential cathode material for high performance lithium-sulfur batteries
Xiaoqin Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Monodispersed Sulfur Nanoparticles for Lithium Sulfur Batteries with Theoretical Performance
Hongwei Chen et al.
NANO LETTERS (2015)
Nitrogen- Doped Mesoporous Carbon Promoted Chemical Adsorption of Sulfur and Fabrication of High- Areal- Capacity Sulfur Cathode with Exceptional Cycling Stability for Lithium- Sulfur Batteries
Jiangxuan Song et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Reduction and nitridation of graphene oxide (GO) films at room temperature using inductively coupled NH3 plasma
Hong Tak Kim et al.
VACUUM (2014)
Challenges and Prospects of Lithium-Sulfur Batteries
Arumugam Manthiram et al.
ACCOUNTS OF CHEMICAL RESEARCH (2013)
Amylopectin Wrapped Graphene Oxide/Sulfur for Improved Cyclability of Lithium-Sulfur Battery
Weidong Zhou et al.
ACS NANO (2013)
All in the graphene family - A recommended nomenclature for two-dimensional carbon materials
Alberto Bianco et al.
CARBON (2013)
Functionalisation of graphene surfaces with downstream plasma treatments
Niall McEvoy et al.
CARBON (2013)
Large scale synthesis of N-doped multi-layered graphene sheets by simple arc-discharge method
Nan Li et al.
CARBON (2010)
Effect of multiwalled carbon nanotubes on electrochemical properties of lithium sulfur rechargeable batteries
SC Han et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Share Paper
