Related references
Note: Only part of the references are listed.In situ chemo-polymerized polypyrrole-coated filter paper for high-efficient solar vapor generation
Yuliang Zhang et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
LiNi1/3Co1/3Mn1/3O2/polypyrrole composites as cathode materials for high-performance lithium-ion batteries
Limin Zhu et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Designing high electrochemical surface area between polyaniline and hydrogel polymer electrolyte for flexible supercapacitors
Xudong Fu et al.
APPLIED SURFACE SCIENCE (2020)
Effect of the Anode Structure on the Stability of a Direct Methanol Fuel Cell
Fenning Jing et al.
ENERGY & FUELS (2020)
Enhanced water management via the optimization of cathode microporous layer using 3D graphene frameworks for direct methanol fuel cell
Weijian Yuan et al.
JOURNAL OF POWER SOURCES (2020)
A review of quaternized polyvinyl alcohol as an alternative polymeric membrane in DMFCs and DEFCs
Zulfirdaus Zakaria et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Polypyrrole nanostructures//activated carbon based electrode for energy storage applications
N. Sabari Arul et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Polytetrafluoroethylene content in standalone microporous layers: Tradeoff between membrane hydration and mass transport losses in polymer electrolyte membrane fuel cells
A. K. C. Wong et al.
APPLIED ENERGY (2019)
Semiempirical thermodynamic modeling of a direct methanol fuel cell system
Alper Can Ince et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)
Mass transport in anode gas diffusion layer of direct methanol fuel cell derived from compression effect
Guangrong Deng et al.
JOURNAL OF POWER SOURCES (2019)
Large-Area Aminated-Graphdiyne Thin Films for Direct Methanol Fuel Cells
Fan Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Influencing Factors on the Stability of Direct Methanol Fuel Cells
F. Jing et al.
FUEL CELLS (2019)
Approaches for measuring the surface areas of metal oxide electrocatalysts for determining their intrinsic electrocatalytic activity
Chao Wei et al.
CHEMICAL SOCIETY REVIEWS (2019)
Enhancing mass transport in direct methanol fuel cell by optimizing the microstructure of anode microporous layer
Guangrong Deng et al.
AICHE JOURNAL (2018)
Solid State Supercapacitor Based on Manganese Oxide@Reduced Graphene Oxide and Polypyrrole Electrodes
N. Sabari Arul et al.
CHEMELECTROCHEM (2018)
A Self-Charging Hybrid Electric Power Device with High Specific Energy and Power
Xudong Fu et al.
ACS ENERGY LETTERS (2018)
A highly selective proton exchange membrane with highly ordered, vertically aligned, and subnanosized 1D channels for redox flow batteries
X. H. Yan et al.
JOURNAL OF POWER SOURCES (2018)
Highly stable nanostructured membrane electrode assembly based on Pt/Nb2O5 nanobelts with reduced platinum loading for proton exchange membrane fuel cells
Yachao Zeng et al.
NANOSCALE (2017)
Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer
Che-Chia Fan et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2016)
A Porous Perchlorate-Doped Polypyrrole Nanocoating on Nickel Nanotube Arrays for Stable Wide-Potential-Window Supercapacitors
Gao-Feng Chen et al.
ADVANCED MATERIALS (2016)
Aligned polyaniline nanorods in situ grown on gas diffusion layer and their application in polymer electrolyte membrane fuel cells
Xudong Fu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
High-performance Fuel Cell with Stretched Catalyst-Coated Membrane: One-step Formation of Cracked Electrode
Sang Moon Kim et al.
SCIENTIFIC REPORTS (2016)
Ordered Polypyrrole Nanowire Arrays Grown on a Carbon Cloth Substrate for a High-Performance Pseudocapacitor Electrode
Zi-Hang Huang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Pushing the Cycling Stability Limit of Polypyrrole for Supercapacitors
Yu Song et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Structure optimization of cathode microporous layer for direct methanol fuel cells
Guicheng Liu et al.
APPLIED ENERGY (2015)
A crack-free and super-hydrophobic cathode micro-porous layer for direct methanol fuel cells
X. H. Yan et al.
APPLIED ENERGY (2015)
Carbon nanotubes grown in situ on carbon paper as a microporous layer for proton exchange membrane fuel cells
Zhiyong Xie et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A hydrophilic-hydrophobic dual-layer microporous layer enabling the improved water management of direct methanol fuel cells operating with neat methanol
X. H. Yan et al.
JOURNAL OF POWER SOURCES (2015)
Asymmetric supercapacitor based on graphene oxide/polypyrrole composite and activated carbon electrodes
Le-Qing Fan et al.
ELECTROCHIMICA ACTA (2014)
Polypyrrole nanowire networks as anodic micro-porous layer for passive direct methanol fuel cells
Huijuan Wu et al.
ELECTROCHIMICA ACTA (2014)
Effects of design parameters on the performance of passive direct methanol fuel cells fed with concentrated fuel
Q. X. Wu et al.
ELECTROCHIMICA ACTA (2014)
Enhancement of the Passive Direct Methanol Fuel Cells Performance by Modification of the Cathode Microporous Layer Using Carbon Nanofibers
M. A. Abdelkareem et al.
FUEL CELLS (2014)
Nanoporous polypyrrole: preparation and hydrogen storage properties
Nour F. Attia et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2014)
A sandwich structured membrane for direct methanol fuel cells operating with neat methanol
Q. X. Wu et al.
APPLIED ENERGY (2013)
Use of polypyrrole in catalysts for low temperature fuel cells
Xianxia Yuan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Water management in a passive direct methanol fuel cell
Vania B. Oliveira et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)
Observation of dynamic liquid water transport in the microporous layer and gas diffusion layer of an operating PEM fuel cell by high-resolution soft X-ray radiography
Phengxay Deevanhxay et al.
JOURNAL OF POWER SOURCES (2013)
Construction of High-Capacitance 3D CoO@Polypyrrole Nanowire Array Electrode for Aqueous Asymmetric Supercapacitor
Cheng Zhou et al.
NANO LETTERS (2013)
Carbon nanotube reinforced polypyrrole nanowire network as a high-performance supercapacitor electrode
Hai Fu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Redox-Active Fe(CN)64--Doped Conducting Polymers with Greatly Enhanced Capacity as Cathode Materials for Li-Ion Batteries
Min Zhou et al.
ADVANCED MATERIALS (2011)
Effects of Nafion® ionomer and carbon particles on structure formation in a proton-exchange membrane fuel cell catalyst layer fabricated by the decal-transfer method
Takahiro Suzuki et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Gold-plated Ni mesh as the gas diffusion medium for air-breathing direct methanol fuel cell
Peng Liu et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2009)
Effects of anode microporous layers made of carbon powder and nanotubes on water transport in direct methanol fuel cells
Q. X. Wu et al.
JOURNAL OF POWER SOURCES (2009)
Effects of microporous layer preparation on the performance of a direct methanol fuel cell
Caishun Lin et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Investigation of the performance decay of anodic PtRu catalyst with working time of direct methanol fuel cells
Zhen-Bo Wang et al.
JOURNAL OF POWER SOURCES (2008)
Effect of cathode gas diffusion layer on water transport and cell performance in direct methanol fuel cells
C. Xu et al.
JOURNAL OF POWER SOURCES (2007)
Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
J. Wang et al.
ELECTROCHIMICA ACTA (2006)
Chemical synthesis of coral-like nanowires and nanowire networks of conducting polypyrrole
C He et al.
SYNTHETIC METALS (2003)
Share Paper
