Related references
Note: Only part of the references are listed.Utilization of solid waste materials as alternative fillers in asphalt mixes: A review
Jayvant Choudhary et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Laboratory evaluation of the effect of coal waste ash (CWA) and rice husk ash (RHA) on performance of asphalt mastics and Stone matrix asphalt (SMA) mixture
Alireza Ameli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of filler on thermodynamic and mechanical behaviour of asphalt mastic: a MD simulation study
Xingyi Zhu et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)
Feasible utilization of waste limestone sludge as filler in bituminous concrete
Jayvant Choudhary et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Experimental evaluation of rice husk ash and fly ash as alternative fillers in hot-mix asphalt
Raja Mistry et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2019)
Moisture Susceptibility and Fatigue Performance of Hydrated Lime-Modified Asphalt Concrete: Experiment and Design Application Case Study
Ahmed F. Al-Tameemi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Fly ash as low cost and environmentally friendly filler and its effect on the properties of mix asphalt
Agnieszka Woszuk et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Application of waste materials as fillers in bituminous mixes
Jayvant Choudhary et al.
WASTE MANAGEMENT (2018)
Laboratory investigation of hot mix asphalt containing waste materials
Mahyar Arabani et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2017)
Performance Analysis of a Cold Asphalt Concrete Binder Course Containing High-Calcium Fly Ash Utilizing Waste Material
Anmar Dulaimi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Assessment of mechanical properties of rice husk ash modified asphalt mixture
Mahyar Arabani et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effect of filler nature and content on the bituminous mastic behaviour under cyclic loads
Rodrigo Miro et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Evaluation of the impact of recycled glass on asphalt mixture performances
Eric Lachance-Tremblay et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2016)
Effect of the chemical composition of fillers in the filler-bitumen interaction
V. Antunes et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler
Ana R. Pasandin et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Influence of the geometrical and physical properties of filler in the filler-bitumen interaction
V. Antunes et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Implications of physico-chemical interactions in asphalt mastics on asphalt microstructure
Chelsea Davis et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Optimization of asphalt and modifier contents for polyethylene terephthalate modified asphalt mixtures using response surface methodology
Taher Baghaee Moghaddam et al.
MEASUREMENT (2015)
The effect of fly ash on the rheological properties of bituminous materials
Konstantin Sobolev et al.
FUEL (2014)
Morphology, thermal analysis and rheology of Sasobit modified warm mix asphalt binders
Qian Qin et al.
FUEL (2014)
Evaluation of rice husk ash as filler in hot mix asphalt concrete
Sebnem Sargin et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
A systematic AFM-based method to measure adhesion differences between micron-sized domains in asphalt binders
Xiaokong Yu et al.
FUEL (2013)
Performance Characteristics of Bituminous Concrete with Industrial Wastes as Filler
Satish Chandra et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
Identification of the Composite Relaxation Modulus of Asphalt Binder Using AFM Nanoindentation
R. Grover Allen et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures
Roberto Melotti et al.
WASTE MANAGEMENT (2013)
Fundamental Characterization of Asphalt Clay Nanocomposites
Munir D. Nazzal et al.
JOURNAL OF NANOMECHANICS AND MICROMECHANICS (2013)
Laboratory investigation on use of fly ash plastic waste composite in bituminous concrete mixtures
Umadevi Rongali et al.
2ND CONFERENCE OF TRANSPORTATION RESEARCH GROUP OF INDIA (2ND CTRG) (2013)
Investigation of using granite sludge as filler in bituminous hot mixtures
Huseyin Akbulut et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Low-Volume Road WMA Mixtures: Moisture Susceptibility of Mixtures Containing Coal Ash and Roofing Shingle with Moist Aggregate
Feipeng Xiao et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Measuring physico-chemical interaction in mastics using glass transition
Cristian Clopotel et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2012)
Measuring Physico-Chemical Interaction in Mastics Using Glass Transition
Cristian Clopotel et al.
ASPHALT PAVING TECHNOLOGY 2012 (2012)
Potential of recycled fine aggregates powder as filler in asphalt mixture
Meizhu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Experimental investigation into the multiscale behaviour of asphalt concrete
B. Shane Underwood et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2011)
Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy
A. T. Pauli et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2011)
The microstructure of petroleum vacuum residue films for bituminous concrete: a microscopy approach
E. D. Sourty et al.
JOURNAL OF MICROSCOPY (2011)
Characterization of ACS Modified Epoxy Resin Composites with Fly Ash and Cenospheres as Fillers: Mechanical and Microstructural Properties
Abdullah M. A. Mohammed Altaweel et al.
POLYMER COMPOSITES (2011)
Prediction of Marshall test results for polypropylene modified dense bituminous mixtures using neural networks
Serkan Tapkin et al.
EXPERT SYSTEMS WITH APPLICATIONS (2010)
Characterization of Fly Ash Bituminous Concrete Mixes
Vishal Sharma et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2010)
Mechanical evaluation of asphalt-aggregate mixtures prepared with fly ash as a filler replacement
Serkan Tapkin
CANADIAN JOURNAL OF CIVIL ENGINEERING (2008)
Effect of carbon dioxide on chloride penetration and chloride ion diffusion coefficient of blended Portland cement mortar
Prinya Chindaprasirt et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Bitumen morphologies by phase-detection atomic force microscopy
JF Masson et al.
JOURNAL OF MICROSCOPY-OXFORD (2006)
Performance of rice husk ash produced using a new technology as a mineral admixture in concrete
M Nehdi et al.
CEMENT AND CONCRETE RESEARCH (2003)
Studies on large crude oil alkanes. II. Isolation and characterization of aromatic waxes and waxy asphaltenes.
L Carbognani et al.
PETROLEUM SCIENCE AND TECHNOLOGY (2000)