Related references
Note: Only part of the references are listed.Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems
Mohammad Balapour et al.
CEMENT & CONCRETE COMPOSITES (2020)
Water desorption characteristics of saturated lightweight fine aggregate in ultra-high performance concrete
Peiliang Shen et al.
CEMENT & CONCRETE COMPOSITES (2020)
Effects of superabsorbent polymer on interfacial transition zone and mechanical properties of ultra-high performance concrete
Jianhui Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Internal curing effect of saturated recycled fine aggregates in early-age mortar
Zhen Li et al.
CEMENT & CONCRETE COMPOSITES (2020)
Shrinkage and strength development of UHSC incorporating a hybrid system of SAP and SRA
Jianhui Liu et al.
CEMENT & CONCRETE COMPOSITES (2019)
Utilization of miscanthus combustion ash as internal curing agent in cement-based materials: Effect on autogenous shrinkage
Yang Lv et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of pretreated fine lightweight aggregate on shrinkage and pore structure of ultra-high strength concrete
Jianhui Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Optimization of autogenous shrinkage and microstructure for Ultra-High Performance Concrete (UHPC) based on appropriate application of porous pumice
Kaizhi Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Internal curing with superabsorbent polymers of different chemical structures
Peihua Zhong et al.
CEMENT AND CONCRETE RESEARCH (2019)
Effects of superabsorbent polymer on shrinkage properties of ultra-high strength concrete under drying condition
Jianhui Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A review on the use of LWA as an internal curing agent of high performance cement-based materials
Xianwei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Jurgen Skibsted et al.
CEMENT AND CONCRETE RESEARCH (2019)
Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete - A review
Li Yang et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of Pumice-Based Porous Material on Hydration Characteristics and Persistent Shrinkage of Ultra-High Performance Concrete (UHPC)
Kaizhi Liu et al.
MATERIALS (2019)
Key mechanisms controlling internal curing performance of natural fibers
Passarin Jongvisuttisun et al.
CEMENT AND CONCRETE RESEARCH (2018)
Converting hollow fly ash into admixture carrier for concrete
Peiyuan Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Method for controlling the absorbed water content of recycled fine aggregates by centrifugation
Zhen Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effects of pore structure and water absorption on internal curing efficiency of porous aggregates
Dinghua Zou et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test
Viktor Mechtcherine et al.
MATERIALS AND STRUCTURES (2018)
Recommendation of RILEM TC 260-RSC: testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials
Didier Snoeck et al.
MATERIALS AND STRUCTURES (2018)
Influence of internal curing on the pore size distribution of high strength concrete
Joo Hyung Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effectiveness of Saturated Coral Aggregate and Shrinkage Reducing Admixture on the Autogenous Shrinkage of Ultrahigh Performance Concrete
Jinming Liu et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)
The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR
D. Snoeck et al.
SCIENTIFIC REPORTS (2017)
The effect of SCMs and SAP on the autogenous shrinkage and hydration process of RPC
Jinming Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete
Weina Meng et al.
CEMENT AND CONCRETE RESEARCH (2017)
An overview on the effect of internal curing on shrinkage of high performance cement-based materials
Jianhui Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of SAP on the properties and pore structure of high performance cement-based materials
Xianwei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of different nanomaterials on hardening and performance of ultra-high strength concrete (UHSC)
Zemei Wu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Measuring the water absorption of recycled aggregates, what is the best practice for concrete production?
M. Quattrone et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials
D. Snoeck et al.
CEMENT AND CONCRETE RESEARCH (2015)
Internal curing by superabsorbent polymers in ultra-high performance concrete
J. Justs et al.
CEMENT AND CONCRETE RESEARCH (2015)
Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Rice husk ash as both pozzolanic admixture and internal curing agent in ultra-high performance concrete
Viet-Thien-An Van et al.
CEMENT & CONCRETE COMPOSITES (2014)
Internal curing with lightweight aggregate produced from biomass-derived waste
Pietro Lura et al.
CEMENT AND CONCRETE RESEARCH (2014)
Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio
Janis Justs et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)
Prediction of self-desiccation in low water-to-cement ratio pastes based on pore structure evolution
Hui Chen et al.
CEMENT AND CONCRETE RESEARCH (2013)
Mesoporous structure and pozzolanic reactivity of rice husk ash in cementitious system
Viet-Thien-An Van et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
An investigation on the use of zeolite aggregates for internal curing of concrete
Sadegh Ghourchian et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage
Christof Schroefl et al.
CEMENT AND CONCRETE RESEARCH (2012)
Pore structure characterization of cement pastes blended with high-volume fly-ash
Qiang Zeng et al.
CEMENT AND CONCRETE RESEARCH (2012)
The influence of the initial moisture content of lightweight aggregate on internal curing
Michael Golias et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Simple Procedure for Determining Long-Term Chemical Shrinkage for Cementitious Systems Using Improved Standard Chemical Shrinkage Test
Tengfei Fu et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Using Isothermal Calorimetry to Assess the Water Absorbed by Fine LWA during Mixing
Javier Castro et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag
Mehmet Gesoglu et al.
MATERIALS AND STRUCTURES (2012)
Early-age autogenous and drying shrinkage behavior of cellulose fiber-reinforced cementitious materials
Shiho Kawashima et al.
CEMENT & CONCRETE COMPOSITES (2011)
Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures
Javier Castro et al.
CEMENT & CONCRETE COMPOSITES (2011)
Superabsorbent polymers: On their interaction with water and pore fluid
Luis Pedro Esteves
CEMENT & CONCRETE COMPOSITES (2011)
Revisiting the protected paste volume concept for internal curing of high-strength concretes
Semion Zhutovsky et al.
CEMENT AND CONCRETE RESEARCH (2011)
Hydration and microstructure of ultra high performance concrete incorporating rice husk ash
Nguyen Van Tuan et al.
CEMENT AND CONCRETE RESEARCH (2011)
Saturated Lightweight Aggregate for Internal Curing in Low w/c Mixtures: Monitoring Water Movement Using X-ray Absorption
R. Henkensiefken et al.
STRAIN (2011)
The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures
Yue Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions
Ryan Henkensiefken et al.
CEMENT & CONCRETE COMPOSITES (2009)
New method for determination of absorption capacity of internal curing agents
N. A. Johansen et al.
CEMENT AND CONCRETE RESEARCH (2009)
Use of porous ceramic waste aggregates for internal curing of high-performance concrete
Masahiro Suzuki et al.
CEMENT AND CONCRETE RESEARCH (2009)
NMR relaxometry during internal curing of Portland cements by lightweight aggregates
Karen Friedemann et al.
MATERIALS AND STRUCTURES (2008)
Measurement of water transport from saturated pumice aggregates to hardening cement paste
Pietro Lura et al.
MATERIALS AND STRUCTURES (2006)
Techniques and materials for internal water curing of concrete
Ole Mejlhede Jensen et al.
MATERIALS AND STRUCTURES (2006)
NMR diffusion and relaxation studies during cement hydration -: A non-destructive approach for clarification of the mechanism of internal post curing of cementitious materials
Karen Friedemann et al.
CEMENT AND CONCRETE RESEARCH (2006)
Influence of cement paste matrix properties on the autogenous curing of high-performance concrete
S Zhutovsky et al.
CEMENT & CONCRETE COMPOSITES (2004)
Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms
P Lura et al.
CEMENT AND CONCRETE RESEARCH (2003)
Changes of cellulose fiber wall structure during drying investigated using NMR self-diffusion and relaxation experiments
D Topgaard et al.
CELLULOSE (2002)
Water-entrained cement-based materials I. Principles and theoretical background
OM Jensen et al.
CEMENT AND CONCRETE RESEARCH (2001)
Mercury porosimetry - An inappropriate method for the measurement of pore size distributions in cement-based materials
S Diamond
CEMENT AND CONCRETE RESEARCH (2000)