Related references
Note: Only part of the references are listed.From Topology Optimization Design to Additive Manufacturing: Today's Success and Tomorrow's Roadmap
Liang Meng et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2020)
An aerospace bracket designed by thermo-elastic topology optimization and manufactured by additive manufacturing
Guanghui Shi et al.
CHINESE JOURNAL OF AERONAUTICS (2020)
Multiscale eigenfrequency optimization of multimaterial lattice structures based on the asymptotic homogenization method
Zhirui Fan et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
Structural topological optimization with dynamic fatigue constraints subject to dynamic random loads
Lei Zhao et al.
ENGINEERING STRUCTURES (2020)
Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing
Chuang Wang et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
An inverse approach to the accurate modelling of 3D-printed sandwich panels with lattice core using beams of variable cross-section
Liang Meng et al.
COMPOSITE STRUCTURES (2020)
Topology optimization for multiscale design of porous composites with multi-domain microstructures
Jie Gao et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Topology optimization of hierarchical lattice structures with substructuring
Zijun Wu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Fatigue-based topology optimization with non-proportional loads
Shanglong Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Topology optimization for minimizing the maximum temperature of transient heat conduction structure
Shuhao Wu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Topology optimization method with elimination of enclosed voids
Lu Zhou et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
A review on optimization of composite structures Part II: Functionally graded materials
S. Nikbakht et al.
COMPOSITE STRUCTURES (2019)
Note on spatial gradient operators and gradient-based minimum length constraints in SIMP topology optimization
Kaike Yang et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Topology-optimized design, construction and experimental evaluation of concrete beams
Jackson L. Jewett et al.
AUTOMATION IN CONSTRUCTION (2019)
Imposing minimum length scale in moving morphable component (MMC)-based topology optimization using an effective connection status (ECS) control method
Rixin Wang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Piecewise length scale control for topology optimization with an irregular design domain
Jikai Liu
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Topology optimization of periodic 3D heat transfer problems with 2D design
Jonas Lundgren et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Topology optimization of continuum structures under hybrid additive-subtractive manufacturing constraints
Yong Sheng Han et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Design and experimental validation of self-supporting topologies for additive manufacturing
Yun-Fei Fu et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Additive manufacturing of functionally graded materials: A review
Chi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Generation of a tree-like support structure for fused deposition modelling based on the L-system and an octree
Yong Zhou et al.
GRAPHICAL MODELS (2019)
Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
Janos Plocher et al.
MATERIALS & DESIGN (2019)
Customization of Automotive Structural Components using Additive Manufacturing and Topology Optimization
Davin Jankovics et al.
IFAC PAPERSONLINE (2019)
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Yunlong Tang et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2018)
Multi-material topology optimization design for continuum structures with crack patterns
Thanh T. Banh et al.
COMPOSITE STRUCTURES (2018)
Thermal conductivities of plain woven C/SiC composite: Micromechanical model considering PyC interphase thermal conductance and manufacture-induced voids
Yingjie Xu et al.
COMPOSITE STRUCTURES (2018)
Experimental validation of 3D printed material behaviors and their influence on the structural topology design
Kai Ke Yang et al.
COMPUTATIONAL MECHANICS (2018)
Topology optimization of self-supporting structures with polygon features for additive manufacturing
Weihong Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Optimized sequence planning for multi-axis hybrid machining of complex geometries
Li Chen et al.
COMPUTERS & GRAPHICS-UK (2018)
Natural Frequency Optimization of Variable-Density Additive Manufactured Lattice Structure: Theory and Experimental Validation
Lin Cheng et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A new overhang constraint for topology optimization of self-supporting structures in additive manufacturing
Alain Garaigordobil et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
Concurrent topology optimization design of structures and non-uniform parameterized lattice microstructures
Chuang Wang et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
Flexible n-Type Tungsten Carbide/Polylactic Acid Thermoelectric Composites Fabricated by Additive Manufacturing
Yong Du et al.
COATINGS (2018)
Support-Free Volume Printing by Multi-Axis Motion
Chengkai Dai et al.
ACM TRANSACTIONS ON GRAPHICS (2018)
Functionally graded materials from topology optimisation and stereolithography
Tao Liu et al.
EUROPEAN POLYMER JOURNAL (2018)
Microstructure and mechanical anisotropy of additively manufactured cold spray copper deposits
Shuo Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Finite-Element-Mesh Based Method for Modeling and Optimization of Lattice Structures for Additive Manufacturing
Wenjiong Chen et al.
MATERIALS (2018)
Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties
Fei Liu et al.
MATERIALS & DESIGN (2018)
An additive manufacturing filter for topology optimization of print-ready designs
Matthijs Langelaar
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)
Undercut and overhang angle control in topology optimization: A density gradient based integral approach
Xiaoping Qian
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2017)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures
Colin Bonatti et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Structural optimization under overhang constraints imposed by additive manufacturing technologies
G. Allaire et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2017)
Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications
Zengqian Liu et al.
PROGRESS IN MATERIALS SCIENCE (2017)
System and process development for coaxial extrusion in fused deposition modelling
Adam C. Taylor et al.
RAPID PROTOTYPING JOURNAL (2017)
Tissue transformation mold design and stereolithography fabrication
Yihao Zheng et al.
RAPID PROTOTYPING JOURNAL (2017)
Topology optimization with finite-life fatigue constraints
Jacob Oest et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)
Concurrent topology design of structure and material using a two-scale topology optimization
Wenjiong Chen et al.
COMPUTERS & STRUCTURES (2017)
Design and development of an additive manufactured component by topology optimisation
Dan Walton et al.
COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT (2017)
Extended multiscale FE approach for steady-state heat conduction analysis of 3D braided composites
Jun-jun Zhai et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
A comprehensive study of feature definitions with solids and voids for topology optimization
Weihong Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Simulation of Elastic Properties of Solid-Lattice Hybrid Structures Fabricated by Additive Manufacturing
Guoying Dong et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
A multi-resolution approach for multi-material topology optimization based on isogeometric analysis
Qui X. Lieu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Self-supporting structure design in additive manufacturing through explicit topology optimization
Xu Guo et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Thermo-mechanical behavior analysis of 3D braided composites by multiscale finite element method
Junjun Zhai et al.
COMPOSITE STRUCTURES (2017)
Shape optimization of a layer by layer mechanical constraint for additive manufacturing
Gregoire Allaire et al.
COMPTES RENDUS MATHEMATIQUE (2017)
Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach
Weisheng Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Grid-pattern optimization framework of novel hierarchical stiffened shells allowing for imperfection sensitivity
Bo Wang et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2017)
3D Printing of Carbon Nanotubes-Based Microsupercapacitors
Wei Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
The role of additive manufacturing in the era of Industry 4.0
Ugur M. Dilberoglu et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Topology Optimization in Aircraft and Aerospace Structures Design
Ji-Hong Zhu et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2016)
Optimization of an area to point heat conduction problem
Kai Guo et al.
APPLIED THERMAL ENGINEERING (2016)
Multi-scale concurrent material and structural design under mechanical and thermal loads
Jun Yan et al.
COMPUTATIONAL MECHANICS (2016)
Feature-driven topology optimization method with signed distance function
Ying Zhou et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Minimum length scale control in structural topology optimization based on the Moving Morphable Components (MMC) approach
Weisheng Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Part orientation optimisation for the additive layer manufacture of metal components
H. D. Morgan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Optimal lattice-structured materials
Mark C. Messner
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Amanda J. Sterling et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Structural topology optimization considering connectivity constraint
Quhao Li et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2016)
Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design
Andrew T. Gaynor et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2016)
Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing
Ashley Reichardt et al.
MATERIALS & DESIGN (2016)
A new methodological framework for design for additive manufacturing
Martin Kumke et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Selective laser melting (SLM) and topology optimization for lighter aerospace componentes
Miguel Seabra et al.
XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016 (2016)
Process planning for additive and subtractive manufacturing technologies
Stephen T. Newman et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Hybrid analysis and optimization of hierarchical stiffened plates based on asymptotic homogenization method
Bo Wang et al.
COMPOSITE STRUCTURES (2015)
Minimum length scale in topology optimization by geometric constraints
Mingdong Zhou et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Multiscale structural topology optimization with an approximate constitutive model for local material microstructure
Liang Xia et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Constraints of distance from boundary to skeleton: For the control of length scale in level set based structural topology optimization
Qi Xia et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Bidirectional Evolutionary Structural Optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing
Yunlong Tang et al.
COMPUTER-AIDED DESIGN (2015)
Support slimming for single material based additive manufacturing
Kailun Hu et al.
COMPUTER-AIDED DESIGN (2015)
The anisotropy of laser melting deposition additive manufacturing Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy
Yanyan Zhu et al.
MATERIALS & DESIGN (2015)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering
Chunze Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Design of materials using topology optimization and energy-based homogenization approach in Matlab
Liang Xia et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2015)
Influence of imperfection distributions for cylindrical stiffened shells with weld lands
Peng Hao et al.
THIN-WALLED STRUCTURES (2015)
Efficient Design-Optimization of Variable-Density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation
Pu Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Topology optimization using PETSc: An easy-to-use, fully parallel, open source topology optimization framework
Niels Aage et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2015)
An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures
Shutian Liu et al.
FRONTIERS OF MECHANICAL ENGINEERING (2015)
Size effect of lattice material and minimum weight design
Jun Yan et al.
ACTA MECHANICA SINICA (2014)
Concurrent topology optimization design of material and structure within FE2 nonlinear multiscale analysis framework
Liang Xia et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)
Doing Topology Optimization Explicitly and Geometrically-A New Moving Morphable Components Based Framework
Xu Guo et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2014)
On the fatigue properties of metals manufactured by selective laser melting - The role of ductility
Stefan Leuders et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Fatigue performance evaluation of selective laser melted Ti-6Al-4V
P. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V
M. Simonelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A survey of structural and multidisciplinary continuum topology optimization: post 2000
Joshua D. Deaton et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2014)
Fatigue constrained topology optimization
Erik Holmberg et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2014)
Hybrid optimization of hierarchical stiffened shells based on smeared stiffener method and finite element method
Peng Hao et al.
THIN-WALLED STRUCTURES (2014)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
The size matching and scaling method: a synthesis method for the design of mesoscale cellular structures
Patrick S. Chang et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2013)
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
M. Smith et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Multi-objective concurrent topology optimization of thermoelastic structures composed of homogeneous porous material
Jiadong Deng et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2013)
Topology optimization approaches A comparative review
Ole Sigmund et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2013)
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Heuristic Optimization Method for Cellular Structure Design of Light Weight Components
Jason Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
A strain energy model for the prediction of the effective coefficient of thermal expansion of composite materials
Yingjie Xu et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Layout optimization of multi-component structures under static loads and random excitations
Zhang Qiao et al.
ENGINEERING STRUCTURES (2012)
Optimal Packing Configuration Design with Finite-Circle Method
Jihong Zhu et al.
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (2012)
A superelement formulation for the efficient layout design of complex multi-component system
Liang Xia et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2012)
Using selective laser sintering for manufacturing
James Butler
ASSEMBLY AUTOMATION (2011)
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
E. Yasa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Topological design of microstructures of cellular materials for maximum bulk or shear modulus
X. Huang et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
On projection methods, convergence and robust formulations in topology optimization
Fengwen Wang et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2011)
Recent development in structural design and optimization
Xu Guo et al.
ACTA MECHANICA SINICA (2010)
Optimum structure with homogeneous optimum cellular material for maximum fundamental frequency
Bin Niu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2009)
Simultaneous optimization of the material properties and the topology of functionally graded structures
Qi Xia et al.
COMPUTER-AIDED DESIGN (2008)
Optimum structure with homogeneous optimum truss-like material
Ling Liu et al.
COMPUTERS & STRUCTURES (2008)
Investigation on the Static Response and Failure Process of Metallic Open Lattice Cellular Structures
G. N. Labeas et al.
STRAIN (2008)
Robust design of composite cylindrical shells under axial compression -: Simulation and validation
C. Huehne et al.
THIN-WALLED STRUCTURES (2008)
A hierarchical model for concurrent material and topology optimisation of three-dimensional structures
P. G. Coelho et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2008)
Design of conducting paths based on topology optimization
Yongcun Zhang et al.
HEAT AND MASS TRANSFER (2008)
Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method
X. Huang et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2007)
Topology optimal design of material microstructures using strain energy-based method
Zhang Weihong et al.
CHINESE JOURNAL OF AERONAUTICS (2007)
Morphology-based black and white filters for topology optimization
Ole Sigmund
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2007)
Bi-directional evolutionary topology optimization using element replaceable method
J. H. Zhu et al.
COMPUTATIONAL MECHANICS (2007)
Scale-related topology optimization of cellular materials and structures
Weihong Zhang et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Finite element modeling concepts and linear analyses of 3D regular open cell structures
MH Luxner et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites
JI Kim et al.
CARBON (2005)
Achieving minimum length scale in topology optimization using nodal design variables and projection functions
JK Guest et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)
A level set method for structural topology optimization and its applications
YL Mei et al.
ADVANCES IN ENGINEERING SOFTWARE (2004)
Selective laser melting of iron-based powder
JP Kruth et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Hierarchical optimization of material and structure
H Rodrigues et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2002)
Computational efficiency and validation of bi-directional evolutionary structural optimisation
OM Querin et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2000)