4.4 Article

Research of coal-direct chemical looping hydrogen generation with iron-based oxygen carrier modified byNaAlO2

Journal

CANADIAN JOURNAL OF CHEMICAL ENGINEERING
Volume 99, Issue 2, Pages 578-589

Publisher

WILEY
DOI: 10.1002/cjce.23878

Keywords

chemical looping; crystal structure; Fe2O3; Al2O3; H(2)production; sodium modification

Funding

  1. Key Research and Development Program Project, the Ningxia Hui Autonomous Region [2018BCE01002]
  2. Key Research and Development Program Ningxia [2018BEE03009]
  3. National First-rate Discipline Construction Project of Ningxia [NXYLXK2017A04]
  4. National Key Research and Development Program Project [2018YFB0605401]
  5. National Science Foundation of China [201868025]

Ask authors/readers for more resources

This study reports the development of a high-performance modified oxygen carrier for coal-direct chemical looping hydrogen generation. The addition of NaAlO2 significantly improved the reactivity of the oxygen carrier, leading to higher carbon conversion and hydrogen production rates.
This study reports a high-performance modified oxygen carrier (OC) in a three-cycle chemical looping process in which coal is used as the raw feedstock to produce hydrogen. A series of experiments of coal-direct chemical looping hydrogen generation (CLHG) were conducted in a batch fluidized bed reactor, in the absence or presence of the NaAlO2. The experimental results indicated that the carbon conversion and hydrogen yield reached 87.0% and 1.30 L center dot g(-1), respectively, when the coal/oxygen carrier (Fe4Al6) mass ratio was 1:20. However, FeO was the main product of the reduction process with Fe4Al6, which limits the production of hydrogen during steam oxidation. Therefore, NaAlO(2)was used to improve the reaction performance of the OC. The carbon conversion and hydrogen production of NaAlO2-loaded oxygen carriers were 10.7% and 9.6% higher than Fe4Al6, respectively. X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and temperature-programmed reduction (TPR) techniques were used to characterize the oxygen carriers. According to the XRD analysis results, the addition of 5 wt% NaAlO(2)can generate NaFeO2. The unique layer structure of NaFeO(2)can loosen the structure between Fe(2)O(3)and Al2O3. Thus, the surface morphology and pore structure of the oxygen carrier were improved, which are responsible for the enhancement in reactivity rather than the catalytic effects of the alkali metal. The cycle performance of the Na0.5Fe4Al6 remained stable after multi-redox cycles, and no serious sintering phenomena were observed; in addition, the carbon conversion and hydrogen yield remained above 86% and 1.40 L center dot g(-1), respectively.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.4
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available