Journal
ACS APPLIED MATERIALS & INTERFACES
Volume 12, Issue 37, Pages 42248-42263Publisher
AMER CHEMICAL SOC
DOI: 10.1021/acsami.0c09879
Keywords
copper oxide; heterostructures; p-type; ethanol sensor; DFT; three-in-one sensor
Funding
- NATO Science for Peace and Security Programme (SPS) [G5634]
- German Research Foundation (DFG Deutsche Forschungsgemeinschaft) [SFB1261, FOR2093, AD 183/16-1, SFB859]
- Federal Ministry of Education and Research by the project PorSSi [(03XP0126 B)]
- EKSH by 3D strukturierte Kohlenstoff-Schwefel Gerustmaterialien als neuartiges und nachhaltiges Kathodenmaterial fur Hochenergie LithiumIonen Akkus
- EPSRC [EP/L000202, EP/R029431]
- WTSH [LPW-E/1.1.2/1486]
- EUSH [LPW-E/1.1.2/1486]
- EPSRC [EP/R029431/1] Funding Source: UKRI
Ask authors/readers for more resources
In this study, a strategy to prepare CuO/Cu2O/Cu microwires that are fully covered by a nanowire (NW) network using a simple thermal-oxidation process is developed. The CuO/Cu2O/Cu microwires are fixed on Au/Cr pads with Cu microparticles. After thermal annealing at 425 degrees C, these CuO/Cu2O/Cu microwires are used as room-temperature 2-propanol sensors. These sensors show different dominating gas responses with operating temperatures, e.g., higher sensitivity to ethanol at 175 degrees C, higher sensitivity to 2-propanol at room temperature and 225 degrees C, and higher sensitivity to hydrogen gas at similar to 300 degrees C. In this context, we propose the sensing mechanism of this three-in-one sensor based on CuO/Cu2O/Cu. Xray diffraction (XRD) studies reveal that the annealing time during oxidation affects the chemical appearance of the sensor, while the intensity of reflections proves that for samples oxidized at 425 degrees C for 1 h the dominating phase is Cu2O, whereas upon further increasing the annealing duration up to 5 h, the CuO phase becomes dominant. The crystal structures of the Cu2O-shell/Cu-core and the CuO NW networks on the surface were confirmed with a transmission electron microscope (TEM), high-resolution TEM (HRTEM), and selected area electron diffraction (SAED), where (HR)TEM micrographs reveal the monoclinic CuO phase. Density functional theory (DFT) calculations bring valuable inputs to the interactions of the different gas molecules with the most stable top surface of CuO, revealing strong binding, electronic band-gap changes, and charge transfer due to the gas molecule interactions with the top surface. This research shows the importance of the nonplanar CuO/Cu2O layered heterostructure as a bright nanomaterial for the detection of various gases, controlled by the working temperature, and the insight presented here will be of significant value in the fabrication of new p-type sensing devices through simple nanotechnology.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available