Related references
Note: Only part of the references are listed.Effects of a Fluorinated Donor Polymer on the Morphology, Photophysics, and Performance of All-Polymer Solar Cells Based on Naphthalene Diimide-Arylene Copolymer Acceptors
Duyen K. Tran et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Performance enhancement of conjugated polymer-small molecule-non fullerene ternary organic solar cells by tuning recombination kinetics and molecular ordering
Ramakant Sharma et al.
SOLAR ENERGY (2020)
15.3% efficiency all-small-molecule organic solar cells enabled by symmetric phenyl substitution
Jinzhao Qin et al.
SCIENCE CHINA-MATERIALS (2020)
Bandgap Tailored Nonfullerene Acceptors for Low-Energy-Loss Near-Infrared Organic Photovoltaics
Jaewon Lee et al.
ACS MATERIALS LETTERS (2020)
Fluorinated solid additives enable high efficiency non-fullerene organic solar cells
Jinlong Cai et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Novel wide-bandgap non-fullerene acceptors for efficient tandem organic solar cells
Yuliar Firdaus et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells
Andrew Wadsworth et al.
CHEMICAL SOCIETY REVIEWS (2019)
Polymer Side-Chain Variation Induces Microstructural Disparity in Nonfullerene Solar Cells
Long Ye et al.
CHEMISTRY OF MATERIALS (2019)
Effects of various donor:acceptor blend ratios on photophysical properties in non-fullerene organic bulk heterojunctions
Zhenchuan Wen et al.
CHINESE CHEMICAL LETTERS (2019)
Side-Chain Engineering of Nonfullerene Acceptors for Near-Infrared Organic Photodetectors and Photovoltaics
Jaewon Lee et al.
ACS ENERGY LETTERS (2019)
Diffusion-Limited Crystallization: A Rationale for the Thermal Stability of Non-Fullerene Solar Cells
Liyang Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Single-Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy
Xiaopeng Xu et al.
ADVANCED MATERIALS (2019)
Chlorinated Thiophene End Groups for Highly Crystalline Alkylated Non-Fullerene Acceptors toward Efficient Organic Solar Cells
Jianquan Zhang et al.
CHEMISTRY OF MATERIALS (2019)
Simple non-fused electron acceptors for efficient and stable organic solar cells
Zhi-Peng Yu et al.
NATURE COMMUNICATIONS (2019)
Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages
Yong Cui et al.
NATURE COMMUNICATIONS (2019)
High-Efficiency As-Cast Organic Solar Cells Based on Acceptors with Steric Hindrance Induced Planar Terminal Group
Yahui Liu et al.
ADVANCED ENERGY MATERIALS (2019)
Ternary Blended Fullerene-Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher-LUMO-Level Acceptor to Improve Film Morphology
Kun Li et al.
ADVANCED ENERGY MATERIALS (2019)
Grazing-incidence scattering-status and perspectives in soft matter and biophysics
Sebastian Jaksch et al.
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2019)
Effect of Solvent Additives on the Morphology and Device Performance of Printed Nonfullerene Acceptor Based Organic Solar Cells
Kerstin S. Wienhold et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Achieving Fast Charge Separation and Low Nonradiative Recombination Loss by Rational Fluorination for High-Efficiency Polymer Solar Cells
Chenkai Sun et al.
ADVANCED MATERIALS (2019)
Exploring Overall Photoelectric Applications by Organic Materials Containing Symmetric Donor Isomers
Zhaoyang Yao et al.
CHEMISTRY OF MATERIALS (2019)
A review of basic crystallography and x-ray diffraction applications
E. S. Ameh
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Small Molecular Donor/Polymer Acceptor Type Organic Solar Cells: Effect of Molecular Weight on Active Layer Morphology
Zijian Zhang et al.
MACROMOLECULES (2019)
Enhanced π-π Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells
Runnan Yu et al.
ADVANCED MATERIALS (2019)
Enhancing the efficiency of PTB7-Th:COi8DFIC-based ternary solar cells with versatile third components
Wei Li et al.
APPLIED PHYSICS REVIEWS (2019)
A non-fullerene acceptor based on alkylphenyl substituted benzodithiophene for high efficiency polymer solar cells with a small voltage loss and excellent stability
Qing Guo et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Fullerene derivative induced morphology of bulk heterojunction blends: PIPCP:PC61BM
Tzu-Yen Huang et al.
RSC ADVANCES (2019)
First-principles theoretical designing of planar non-fullerene small molecular acceptors for organic solar cells: manipulation of noncovalent interactions
Asif Mahmood et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)
Benzo[1,2-b:4,5-b]diselenophene-fused nonfullerene acceptors with alternative aromatic ring-based and monochlorinated end groups: a new synergistic strategy to simultaneously achieve highly efficient organic solar cells with the energy loss of 0.49 eV
Shi-Sheng Wan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Quenching to the Percolation Threshold in Organic Solar Cells
Long Ye et al.
JOULE (2019)
A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11%
Zhenye Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
A wide bandgap conjugated polymer donor based on alkoxyl-fluorophenyl substituted benzodithiophene for high performance non-fullerene polymer solar cells
Wanbin Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity
Ming-Ao Pan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Asymmetric fused-ring electron acceptor with two distinct terminal groups for efficient organic solar cells
Linglong Ye et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
Jun Yuan et al.
JOULE (2019)
On the Effect of Confinement on the Structure and Properties of Small-Molecular Organic Semiconductors
Jaime Martin et al.
ADVANCED ELECTRONIC MATERIALS (2018)
The Influence of Solvent Additive on Polymer Solar Cells Employing Fullerene and Non-Fullerene Acceptors
Xin Song et al.
ADVANCED ELECTRONIC MATERIALS (2018)
Quinoxaline-Containing Nonfullerene Small-Molecule Acceptors with a Linear A(2)-A(1)-D-A(1)-A(2) Skeleton for Poly(3-hexylthiophene)-Based Organic Solar Cells
Bo Xiao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Impact of Low Molecular Weight Poly(3-hexylthiophene)s as Additives in Organic Photovoltaic Devices
Zach D. Seibers et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Fused Tris(thienothiophene)-Based Electron Acceptor with Strong Near-Infrared Absorption for High-Performance As-Cast Solar Cells
Tengfei Li et al.
ADVANCED MATERIALS (2018)
Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR-Absorbing Electron Acceptors
Shuixing Dai et al.
ADVANCED MATERIALS (2018)
Surpassing 10% Efficiency Benchmark for Nonfullerene Organic Solar Cells by Scalable Coating in Air from Single Nonhalogenated Solvent
Long Ye et al.
ADVANCED MATERIALS (2018)
Effect of Core Size on Performance of Fused-Ring Electron Acceptors
Shuixing Dai et al.
CHEMISTRY OF MATERIALS (2018)
Modulating Molecular Orientation Enables Efficient Nonfullerene Small-Molecule Organic Solar Cells
Liyan Yang et al.
CHEMISTRY OF MATERIALS (2018)
Solvent Vapor Annealing-Mediated Crystallization Directs Charge Generation, Recombination and Extraction in BHJ Solar Cells
Maxime Babics et al.
CHEMISTRY OF MATERIALS (2018)
A novel thiazole based acceptor for fullerene-free organic solar cells
Asif Mahmood et al.
DYES AND PIGMENTS (2018)
High Performance Ternary Organic Solar Cells due to Favored Interfacial Connection by a Non-Fullerene Electron Acceptor with Cross-Like Molecular Geometry
Valerii Sharapov et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Quantitative relations between interaction parameter, miscibility and function in organic solar cells
Long Ye et al.
NATURE MATERIALS (2018)
In Situ Analysis of Solvent and Additive Effects on Film Morphology Evolution in Spin-Cast Small-Molecule and Polymer Photovoltaic Materials
Eric F. Manley et al.
ADVANCED ENERGY MATERIALS (2018)
Recent Progress in Ternary Organic Solar Cells Based on Nonfullerene Acceptors
Runnan Yu et al.
ADVANCED ENERGY MATERIALS (2018)
A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells
Xi Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Reducing the confinement of PBDB-T to ITIC to improve the crystallinity of PBDB-T/ITIC blends
Qiuju Liang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Achieving over 11% power conversion efficiency in PffBT4T-2OD-based ternary polymer solar cells with enhanced open-circuit-voltage and suppressed charge recombination
Wei Li et al.
NANO ENERGY (2018)
Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing
Qunping Fan et al.
NANO ENERGY (2018)
Controlling Blend Morphology for Ultrahigh Current Density in Nonfullerene Acceptor-Based Organic Solar Cells
Xin Song et al.
ACS ENERGY LETTERS (2018)
Morphology Control Enables Efficient Ternary Organic Solar Cells
Yuanpeng Xie et al.
ADVANCED MATERIALS (2018)
Importance of Nucleation during Morphology Evolution of the Blade-Cast PffBT4T-2OD-Based Organic Solar Cells
Zhaozhao Bi et al.
MACROMOLECULES (2018)
Manipulating the crystal structure of a conjugated polymer for efficient sequentially processed organic solar cells
Ahra Yi et al.
NANOSCALE (2018)
Designing an asymmetrical isomer to promote the LUMO energy level and molecular packing of a non-fullerene acceptor for polymer solar cells with 12.6% efficiency
Wei Gao et al.
CHEMICAL SCIENCE (2018)
Modulation of End Groups for Low-Bandgap Nonfullerene Acceptors Enabling High-Performance Organic Solar Cells
Yuzhong Chen et al.
ADVANCED ENERGY MATERIALS (2018)
Enhancing the performance of non-fullerene organic solar cells via end group engineering of fused-ring electron acceptors
Cenqi Yan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Recent progress in porphyrin-based materials for organic solar cells
Asif Mahmood et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Introducing Four 1,1-Dicyanomethylene-3-indanone End-Capped Groups as an Alternative Strategy for the Design of Small-Molecular Nonfullerene Acceptors
Asif Mahmood et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Design and application of volatilizable solid additives in non-fullerene organic solar cells
Runnan Yu et al.
NATURE COMMUNICATIONS (2018)
Selenopheno[3,2-b]thiophene-Based Narrow-Bandgap Nonfullerene Acceptor Enabling 13.3% Efficiency for Organic Solar Cells with Thickness-Insensitive Feature
Jin-Liang Wang et al.
ACS ENERGY LETTERS (2018)
Naphthodithiophene-Based Nonfullerene Acceptor for High-Performance Organic Photovoltaics: Effect of Extended Conjugation
Jingshuai Zhu et al.
ADVANCED MATERIALS (2018)
Design of Diketopyrrolopyrrole (DPP)-Based Small Molecules for Organic-Solar-Cell Applications
Ailing Tang et al.
ADVANCED MATERIALS (2017)
Achievement of High Voc of 1.02 V for P3HT-Based Organic Solar Cell Using a Benzotriazole-Containing Non-Fullerene Acceptor
Bo Xiao et al.
ADVANCED ENERGY MATERIALS (2017)
High-Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi-Length Scale Morphology and Device Performance
Long Ye et al.
ADVANCED ENERGY MATERIALS (2017)
Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%
Tanya Kumari et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Shuixing Dai et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor
Haijun Bin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
2,2′-Bis(1,3,4-thiadiazole)-Based π-Conjugated Copolymers for Organic Photovoltaics with Exceeding 8% and Its Molecular Weight Dependence of Device Performance
Seijiro Fukuta et al.
MACROMOLECULES (2017)
Comparison among Perylene Diimide (PDI), Naphthalene Diimide (NDI), and Naphthodithiophene Diimide (NDTI) Based n-Type Polymers for All-Polymer Solar Cells Application
Jing Yang et al.
MACROMOLECULES (2017)
Strong polymer molecular weight-dependent material interactions: impact on the formation of the polymer/fullerene bulk heterojunction morphology
Joo-Hyun Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Evolving molecular architectures of donor-acceptor conjugated polymers for photovoltaic applications: from one-dimensional to branched to two-dimensional structures
Yu-Wei Su et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Tuning Voc for high performance organic ternary solar cells with non-fullerene acceptor alloys
Yusheng Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)
Wangqiao Chen et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
A universal approach to improve electron mobility without significant enlarging phase separation in IDT-based non-fullerene acceptor organic solar cells
Lin Zhang et al.
NANO ENERGY (2017)
Design and synthesis of low band gap non-fullerene acceptors for organic solar cells with impressively high Jsc over 21 mA cm-2
Huan-Huan Gao et al.
SCIENCE CHINA-MATERIALS (2017)
The underestimated potential of solar energy to mitigate climate change
Felix Creutzig et al.
NATURE ENERGY (2017)
Enhancing Indacenodithiophene Acceptor Crystallinity via Substituent Manipulation Increases Organic Solar Cell Efficiency
Thomas J. Aldrich et al.
CHEMISTRY OF MATERIALS (2017)
Design of a New Small-Molecule Electron Acceptor Enables Efficient Polymer Solar Cells with High Fill Factor
Sunsun Li et al.
ADVANCED MATERIALS (2017)
Improved Domain Size and Purity Enables Efficient All-Small-Molecule Ternary Solar Cells
Hao Zhang et al.
ADVANCED MATERIALS (2017)
Morphology control enables thickness-insensitive efficient nonfullerene polymer solar cells
Xiaoyu Liu et al.
MATERIALS CHEMISTRY FRONTIERS (2017)
Enhancing Performance of Nonfullerene Acceptors via Side-Chain Conjugation Strategy
Jiayu Wang et al.
ADVANCED MATERIALS (2017)
Fused Hexacyclic Nonfullerene Acceptor with Strong Near-Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency
Wei Wang et al.
ADVANCED MATERIALS (2017)
Charge Transport in Intermixed Regions of All-Polymer Solar Cells Studied by Conductive Atomic Force Microscopy
Miki Osaka et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A Novel Thiophene-Fused Ending Group Enabling an Excellent Small Molecule Acceptor for High-Performance Fullerene-Free Polymer Solar Cells with 11.8% Efficiency
Dongjun Xie et al.
SOLAR RRL (2017)
Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ Viewpoint
Lee J. Richter et al.
CHEMICAL REVIEWS (2017)
Single-Junction Binary-Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency
Fuwen Zhao et al.
ADVANCED MATERIALS (2017)
An In Situ GISAXS Study of Selective Solvent Vapor Annealing in Thin Block Copolymer Films: Symmetry Breaking of In-Plane Sphere Order upon Deswelling
Ilja Gunkel et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2016)
Following the Morphology Formation In Situ in Printed Active Layers for Organic Solar Cells
Stephan Proeller et al.
ADVANCED ENERGY MATERIALS (2016)
Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10%
Tao Liu et al.
ADVANCED MATERIALS (2016)
Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Wenchao Zhao et al.
ADVANCED MATERIALS (2016)
Effects of solvent additive on s-shaped curves in solution-processed small molecule solar cells
John A. Love et al.
BEILSTEIN JOURNAL OF ORGANIC CHEMISTRY (2016)
Fullerene-free small molecule organic solar cells with a high open circuit voltage of 1.15 V
Wang Ni et al.
CHEMICAL COMMUNICATIONS (2016)
Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers
Bertrand J. Tremolet de Villers et al.
CHEMISTRY OF MATERIALS (2016)
Series of Multifluorine Substituted Oligomers for Organic Solar Cells with Efficiency over 9% and Fill Factor of 0.77 by Combination Thermal and Solvent Vapor Annealing
Jin-Liang Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells
Yankang Yang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency
Yuze Lin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Controlling Domain Spacing and Grain Size in Cylindrical Block Copolymer Thin Films by Means of Thermal and Solvent Vapor Annealing
Xiaodan Gu et al.
MACROMOLECULES (2016)
11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor
Haijun Bin et al.
NATURE COMMUNICATIONS (2016)
Optimized Alloy-Parallel Morphology of Ternary Organic Solar Cells
Zaiyu Wang et al.
ADVANCED ENERGY MATERIALS (2016)
Time-Dependent Morphology Evolution of Solution-Processed Small Molecule Solar Cells during Solvent Vapor Annealing
Jie Min et al.
ADVANCED ENERGY MATERIALS (2016)
Controlling Molecular Orientation of Naphthalenediimide-Based Polymer Acceptors for High Performance All-Polymer Solar Cells
Jihye Jung et al.
ADVANCED ENERGY MATERIALS (2016)
Investigation of morphological degradation of P3HT:PCBM bulk heterojunction films exposed to long-term host solvent vapor
Weijia Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Controlled Mutual Diffusion between Fullerene and Conjugated Polymer Nanopillars in Ordered Heterojunction Solar Cells
Jongkuk Ko et al.
ADVANCED MATERIALS INTERFACES (2016)
Guinier peak analysis for visual and automated inspection of small-angle X-ray scattering data
Christopher D. Putnam
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)
Effect of Blend Composition and Additives on the Morphology of PCPDTBT:PC71BM Thin Films for Organic Photovoltaics
Christoph J. Schaffer et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
The Crystallization of PEDOT:PSS Polymeric Electrodes Probed In Situ during Printing
Claudia M. Palumbiny et al.
ADVANCED MATERIALS (2015)
An All-Small-Molecule Organic Solar Cell with High Efficiency Nonfullerene Acceptor
Oh Kyu Kwon et al.
ADVANCED MATERIALS (2015)
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Yuze Lin et al.
ADVANCED MATERIALS (2015)
The Crucial Role of Confined Residual Additives on the Photostability of P3HT:PCBM Active Layers
Anrelien Tournebize et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells: Its Effect on Polymer Aggregation and Phase Separation
Hyunbum Kang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells
Jianqi Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Status and prospects for ternary organic photovoltaics
Luyao Lu et al.
NATURE PHOTONICS (2015)
Efficient inverted polymer solar cells employing favourable molecular orientation
Varun Vohra et al.
NATURE PHOTONICS (2015)
Homogeneous phase separation in polymer:fullerene bulk heterojunction organic solar cells
Wei-Long Xu et al.
ORGANIC ELECTRONICS (2015)
A low band gap n-type polymer based on dithienosilole and naphthalene diimide for all-polymer solar cells application
Yanfang Geng et al.
POLYMER (2015)
A comparison of n-type copolymers based on cyclopentadithiophene and naphthalene diimide/perylene diimides for all-polymer solar cell applications
Bo Xiao et al.
POLYMER CHEMISTRY (2015)
High efficient ternary polymer solar cells based on absorption complementary materials as electron donor
Miao Zhang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
A real-time study of the benefits of co-solvents in polymer solar cell processing
Jacobus J. van Franeker et al.
NATURE COMMUNICATIONS (2015)
Recent research progress on quasi-solid-state electrolytes for dye-sensitized solar cells
Asif Mahmood
JOURNAL OF ENERGY CHEMISTRY (2015)
Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit
Zhengke Li et al.
NANO ENERGY (2015)
Advanced grazing-incidence techniques for modern soft-matter materials analysis
Alexander Hexemer et al.
IUCRJ (2015)
Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating
Feng Liu et al.
ADVANCED MATERIALS (2015)
Importance of Domain Purity and Molecular Packing in Efficient Solution-Processed Small-Molecule Solar Cells
Subhrangsu Mukherjee et al.
ADVANCED MATERIALS (2015)
Non-Fullerene Organic Solar Cells with 6.1% Efficiency through Fine-Tuning Parameters of the Film-Forming Process
Xin Zhang et al.
CHEMISTRY OF MATERIALS (2015)
Small-molecule solar cells with efficiency over 9%
Qian Zhang et al.
NATURE PHOTONICS (2015)
In Situ Morphology Studies of the Mechanism for Solution Additive Effects on the Formation of Bulk Heterojunction Films
Lee J. Richter et al.
ADVANCED ENERGY MATERIALS (2015)
An In Situ Grazing Incidence X-Ray Scatterings Study of Block Copolymer Thin Films During Solvent Vapor Annealing
Xiaodan Gu et al.
ADVANCED MATERIALS (2014)
Controlling Molecular Weight of a High Efficiency Donor-Acceptor Conjugated Polymer and Understanding Its Significant Impact on Photovoltaic Properties
Wentao Li et al.
ADVANCED MATERIALS (2014)
The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques
Peter Mueller-Buschbaum
ADVANCED MATERIALS (2014)
New Form of an Old Natural Dye: Bay-Annulated Indigo (BAI) as an Excellent Electron Accepting Unit for High Performance Organic Semiconductors
Bo He et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Understanding the Morphology of PTB7: PCBM Blends in Organic Photovoltaics
Feng Liu et al.
ADVANCED ENERGY MATERIALS (2014)
Sub-glass transition annealing enhances polymer solar cell performance
Jonas Bergqvist et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Spin-Cast Bulk Heterojunction Solar Cells: A Dynamical Investigation
Kang Wei Chou et al.
ADVANCED MATERIALS (2013)
Solvent Additive Effects on Small Molecule Crystallization in Bulk Heterojunction Solar Cells Probed During Spin Casting
Louis A. Perez et al.
ADVANCED MATERIALS (2013)
Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends
Liqiang Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Bi-hierarchical nanostructures of donor-acceptor copolymer and fullerene for high efficient bulk heterojunction solar cells
Hsueh-Chung Liao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Photocurrent Enhancement from Diketopyrrolopyrrole Polymer Solar Cells through Alkyl-Chain Branching Point Manipulation
Iain Meager et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Fluorine Substituents Reduce Charge Recombination and Drive Structure and Morphology Development in Polymer Solar Cells
Andrew C. Stuart et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Morphology and Optical Properties of P3HT:MEH-CN-PPV Blend Films
Matthias A. Ruderer et al.
MACROMOLECULES (2013)
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Feng Liu et al.
PROGRESS IN POLYMER SCIENCE (2013)
Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells
Brian A. Collins et al.
ADVANCED ENERGY MATERIALS (2013)
Effects of the Molecular Weight and the Side-Chain Length on the Photovoltaic Performance of Dithienosilole/Thienopyrrolodione Copolymers
Ta-Ya Chu et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Drastic Change of Molecular Orientation in a Thiazolothiazole Copolymer by Molecular-Weight Control and Blending with PC61BM Leads to High Efficiencies in Solar Cells
Itaru Osaka et al.
ADVANCED MATERIALS (2012)
Efficient Polymer Solar Cells Based on a Low Bandgap Semi-crystalline DPP Polymer-PCBM Blends
Feng Liu et al.
ADVANCED MATERIALS (2012)
From Binary to Ternary Solvent: Morphology Fine-tuning of D/A Blends in PDPP3T-based Polymer Solar Cells
Long Ye et al.
ADVANCED MATERIALS (2012)
Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale
Jonathan Rivnay et al.
CHEMICAL REVIEWS (2012)
Manipulating the Morphology of P3HT-PCBM Bulk Heterojunction Blends with Solvent Vapor Annealing
Eric Verploegen et al.
CHEMISTRY OF MATERIALS (2012)
Morphology characterization in organic and hybrid solar cells
Wei Chen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Stacking of Hexagonal Nanocrystal Layers during Langmuir-Blodgett Deposition
Detlef-M. Smilgies et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2012)
Phase Separation and Molecular Intermixing in Polymer-Fullerene Bulk Heterojunction Thin Films
Matthias A. Ruderer et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2012)
Solar Cell Efficiency, Self-Assembly, and Dipole-Dipole Interactions of Isomorphic Narrow-Band-Gap Molecules
Christopher J. Takacs et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Time-Resolved Structural Evolution of Additive-Processed Bulk Heterojunction Solar Cells
James T. Rogers et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Factors Governing Intercalation of Fullerenes and Other Small Molecules Between the Side Chains of Semiconducting Polymers Used in Solar Cells
Nichole Cates Miller et al.
ADVANCED ENERGY MATERIALS (2012)
Competition between Fullerene Aggregation and Poly(3-hexylthiophene) Crystallization upon Annealing of Bulk Heterojunction Solar Cells
Wei-Ru Wu et al.
ACS NANO (2011)
Effect of Trace Solvent on the Morphology of P3HT:PCBM Bulk Heterojunction Solar Cells
Lilian Chang et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Solvent-Induced Morphology in Polymer-Based Systems for Organic Photovoltaics
Matthias A. Ruderer et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Molecular Characterization of Organic Electronic Films
Dean M. DeLongchamp et al.
ADVANCED MATERIALS (2011)
Structural Order in Bulk Heterojunction Films Prepared with Solvent Additives
James T. Rogers et al.
ADVANCED MATERIALS (2011)
Watching the Annealing Process One Polymer Chain at a Time
Jan Vogelsang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Correlating the scattered intensities of P3HT and PCBM to the current densities of polymer solar cells
Enrique D. Gomez et al.
CHEMICAL COMMUNICATIONS (2011)
Role of Molecular Order and Solid-State Structure in Organic Field-Effect Transistors
Marta Mas-Torrent et al.
CHEMICAL REVIEWS (2011)
Influence of blend microstructure on bulk heterojunction organic photovoltaic performance
Christoph J. Brabec et al.
CHEMICAL SOCIETY REVIEWS (2011)
Design of Organic Semiconductors from Molecular Electrostatics
Georg Heimel et al.
CHEMISTRY OF MATERIALS (2011)
Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications
Pierre M. Beaujuge et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
A Phase Diagram of the P3HT:PCBM Organic Photovoltaic System: Implications for Device Processing and Performance
Paul E. Hopkinson et al.
MACROMOLECULES (2011)
Effect of Photovoltaic Polymer/Fullerene Blend Composition Ratio on Microstructure Evolution during Film Solidification Investigated in Real Time by X-ray Diffraction
Monamie Sanyal et al.
MACROMOLECULES (2011)
Real-Time Observation of Poly(3-alkylthiophene) Crystallization and Correlation with Transient Optoelectronic Properties
Bryan W. Boudouris et al.
MACROMOLECULES (2011)
Hierarchical Nanomorphologies Promote Exciton Dissociation in Polymer/Fullerene Bulk Heterojunction Solar Cells
Wei Chen et al.
NANO LETTERS (2011)
Quantitative analysis of lattice disorder and crystallite size in organic semiconductor thin films
Jonathan Rivnay et al.
PHYSICAL REVIEW B (2011)
Higher Molecular Weight Leads to Improved Photoresponsivity, Charge Transport and Interfacial Ordering in a Narrow Bandgap Semiconducting Polymer
Minghong Tong et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
n-Type Organic Semiconductors in Organic Electronics
John E. Anthony et al.
ADVANCED MATERIALS (2010)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Influence of Annealing and Blending of Photoactive Polymers on Their Crystalline Structure
Matthias A. Ruderer et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2010)
Quantification of Thin Film Crystallographic Orientation Using X-ray Diffraction with an Area Detector
Jessy L. Baker et al.
LANGMUIR (2010)
Donor-Acceptor Polymers Incorporating Alkylated Dithienylbenzothiadiazole for Bulk Heterojunction Solar Cells: Pronounced Effect of Positioning Alkyl Chains
Huaxing Zhou et al.
MACROMOLECULES (2010)
Observation of long-range exciton diffusion in highly ordered organic semiconductors
H. Najafov et al.
NATURE MATERIALS (2010)
Ordering of Poly(3-hexylthiophene) Nanocrystallites on the Basis of Substrate Surface Energy
Bryce Meredig et al.
ACS NANO (2009)
Bimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells
A. C. Mayer et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors
Detlef-M. Smilgies
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2009)
Orientation-dependent ionization energies and interface dipoles in ordered molecular assemblies
Steffen Duhm et al.
NATURE MATERIALS (2008)
X-ray scattering from films of semiconducting polymers
Michael L. Chabinyc
POLYMER REVIEWS (2008)
Effect of the molecular weight of poly(3-hexylthiophene) on the morphology and performance of polymer bulk heterojunction solar cells
Wanli Ma et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2007)
Molecular weight dependence of chain orientation and optical constants of thin films of the conjugated polymer MEH-PPV
Kaloian Koynov et al.
MACROMOLECULES (2006)
Molecular-weight dependence of interchain polaron delocalization and exciton bandwidth in high-mobility conjugated polymers
Jui-Fen Chang et al.
PHYSICAL REVIEW B (2006)
Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends
FL Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Morphology of polymer/fullerene bulk heterojunction solar cells
H Hoppe et al.
JOURNAL OF MATERIALS CHEMISTRY (2006)
Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells
P Schilinsky et al.
CHEMISTRY OF MATERIALS (2005)
Real-time evolution of the distribution of nanoparticles in an ultrathin-polymer-film-based waveguide
S Narayanan et al.
PHYSICAL REVIEW LETTERS (2005)
Effect of molecular weight and annealing of poly (3-hexylthiophene)s on the performance of organic field-effect transistors
A Zen et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
Controlling the field-effect mobility of regioregular polythiophene by changing the molecular weight
RJ Kline et al.
ADVANCED MATERIALS (2003)
Grazing incidence small-angle X-ray scattering:: an advanced scattering technique for the investigation of nanostructured polymer films
P Müller-Buschbaum
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2003)
Share Paper
