Related references
Note: Only part of the references are listed.Improved fracture toughness and multiple toughening mechanisms of NdPO4/NdYbZr2O7 composites
Yang Wu et al.
CERAMICS INTERNATIONAL (2020)
Improvement of Oxidation Resistance and Adhesion Strength of Thermal Barrier Coating by Grinding and Grit-Blasting Treatments
Kiyohiro Ito et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)
A novel reliability-based topology optimization framework for the concurrent design of solid and truss-like material structures with unknown-but-bounded uncertainties
Lei Wang et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2019)
Prediction of critical rupture of plasma-sprayed yttria stabilized zirconia thermal barrier coatings under burner rig test via finite element simulation and in-situ acoustic emission technique
L. Wang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Dynamic crack growth mechanism and lifetime assessment in plasma sprayed thermal barrier system upon temperature cycling
Zhi-Yuan Wei et al.
CERAMICS INTERNATIONAL (2019)
Stress states and crack behavior in plasma sprayed TBCs based on a novel lamellar structure model with real interface morphology
Zhi-Yuan Wei et al.
CERAMICS INTERNATIONAL (2019)
Evolution of porosity, crack density, and CMAS penetration in thermal barrier coatings subjected to burner rig testing
Daniel E. Mack et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
The Influence of TBC Aging on Crack Propagation Due to Foreign Object Impact
Przemyslaw Golewski et al.
MATERIALS (2019)
Microstructure and tribological characteristics of APS sprayed NiCrBSi/flyash cenosphere/Cr2O3 and NiCrBSi/flyash cenosphere/Mo composite coatings at elevated temperatures
N. Nagabhushana et al.
MATERIALS RESEARCH EXPRESS (2019)
Cracking behaviors of EB-PVD thermal barrier coating under temperature gradient
Duoqi Shi et al.
CERAMICS INTERNATIONAL (2019)
The Combined Effect of Creep and TGO Growth on the Cracking Driving Force in a Plasma-Sprayed Thermal Barrier System
Zhi-Yuan Wei et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Microstructure and self-healing properties of multi-layered NiCoCrAlY/TAZ/YSZ thermal barrier coatings fabricated by atmospheric plasma spraying
L. Wang et al.
APPLIED SURFACE SCIENCE (2019)
CMAS penetration-induced cracking behavior in the ceramic top coat of APS TBCs
Zhenwei Cai et al.
CERAMICS INTERNATIONAL (2019)
Technology review and thermodynamic performance study of a biogas-fed micro humid air turbine
M. MosayebNezhad et al.
RENEWABLE ENERGY (2019)
Numerical stress analysis of the TBC-film cooling system under operating conditions considering the effects of thermal gradient and TGO growth
Jishen Jiang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
High temperature behavior of a diffusion barrier coating evolved from ZrO2 precursor layer
Chenxi Yang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
What is the suitable segmentation crack density for atmospheric plasma sprayed thick thermal barrier coatings with the improved thermal shock resistance?
L. Wang et al.
APPLIED SURFACE SCIENCE (2018)
Transient thermal stress due to the penetration of calcium-magnesium-alumino-silicate in EB-PVD thermal barrier coating system
Guanghui Zhang et al.
CERAMICS INTERNATIONAL (2018)
7YSZ coating prepared by PS-PVD based on heterogeneous nucleation
Ziqian Deng et al.
CHINESE JOURNAL OF AERONAUTICS (2018)
Evolution of Residual Stresses in PS-PVD Thermal Barrier Coatings on Thermal Cycling
Jiasheng Yang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
A TEM Investigation of Columnar-Structured Thermal Barrier Coatings Deposited by Plasma Spray-Physical Vapor Deposition (PS-PVD)
Stefan Rezanka et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2018)
Influences of Cr and Co on the Growth of Thermally Grown Oxide in Thermal Barrier Coating during High-Temperature Exposure
Weifang Zhang et al.
COATINGS (2018)
Influence of Lamellar Interface Morphology on Cracking Resistance of Plasma-Sprayed YSZ Coatings
Jibo Huang et al.
COATINGS (2018)
The Temperature Distribution in Plasma-Sprayed Thermal-Barrier Coatings During Crack Propagation and Coalescence
Hui Dong et al.
COATINGS (2018)
Finite Element Analysis of the Effects of Thermally Grown Oxide Thickness and Interface Asperity on the Cracking Behavior Between the Thermally Grown Oxide and the Bond Coat
Jishen Jiang et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2017)
Failure Behavior of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings Under Three-Point Bending Test via Acoustic Emission Technique
L. Wang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Effects of growth stress in finite-deformation thermally grown oxide on failure mechanism of thermal barrier coatings
Q. Shen et al.
MECHANICS OF MATERIALS (2017)
Investigation of the resistance of open-column-structured PS-PVD TBCs to erosive and high-temperature corrosive attack
Stefan Rezanka et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Characterization of the strain in the thermal barrier coatings caused by molten CaO-MgO-Al2O3-SiO2 using a digital image correlation technique
L. Yang et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Corrosion and thermal cycling behavior of plasma sprayed thermal barrier coatings on die steel
Jia Sun et al.
MATERIALS & DESIGN (2017)
Effects of CMAS penetration on the delamination cracks in EB-PVD thermal barrier coatings with curved interface
Luochuan Su et al.
CERAMICS INTERNATIONAL (2017)
Modeling of thermal properties and failure of thermal barrier coatings with the use of finite element methods: A review
L. Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Effects of Heat Exposure Time and Temperature on the Delamination Behavior of Air Plasma-Sprayed Thermal Barrier Coatings under Shear Loading
Makoto Hasegawa et al.
MATERIALS TRANSACTIONS (2016)
Influence of cracks in APS-TBCs on stress around TGO during thermal cycling: A numerical simulation study
L. Wang et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Microstructure evolution of ZrO2-YbTaO4 thermal barrier coatings
Jason S. Van Sluytman et al.
ACTA MATERIALIA (2015)
Analysis of the crack penetration/deflection at the interfaces in the intelligent coating system utilizing virtual crack closure technique
Yang Sun et al.
ENGINEERING FRACTURE MECHANICS (2015)
Nanocomposite powder with three-dimensional network structure for preparing alumina-titania nanocomposite coating with advanced performance
Yong Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Investigation of Crack Propagation Behavior of Atmospheric Plasma-Sprayed Thermal Barrier Coatings under Uniaxial Tension Using the Acoustic Emission Technique
L. Wang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)
Influence of composite powders' microstructure on the microstructure and properties of Al2O3-TiO2 coatings fabricated by plasma spraying
Yong Yang et al.
MATERIALS & DESIGN (2015)
An interaction energy integral method for T-stress evaluation in nonhomogeneous materials under thermal loading
Fengnan Guo et al.
MECHANICS OF MATERIALS (2015)
Microstructure, thermal conductivity and thermal cycling behavior of thermal barrier coatings prepared by plasma spray physical vapor deposition
Lihua Gao et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Numerical study on interaction of surface cracking and interfacial delamination in thermal barrier coatings under tension
W. Zhu et al.
APPLIED SURFACE SCIENCE (2014)
XFEM with equivalent eigenstrain for matrix-inclusion interfaces
Elena Benvenuti
COMPUTATIONAL MECHANICS (2014)
Enhancement of Thermal Stability, Flame Retardancy, and Antimicrobial Properties of Cotton Fabrics Functionalized by Inorganic Nanocomposites
V. Rajendran et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Fatigue life simulation of functionally graded materials under cyclic thermal load using XFEM
S. Bhattacharya et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
Microstructural and optical studies of CuO thin films prepared by chemical ageing of copper substrate in alkaline ammonia solution
Abdul Hai Alami et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma- Sprayed TBCs
Hui Dong et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Influence of Island-Like Oxides in the Bond-Coat on the Stress and Failure Patterns of the Thermal-Barrier Coatings Fabricated by Atmospheric Plasma Spraying During Long-Term High Temperature Oxidation
L. Wang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings
M. Gupta et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects
R. Darolia
INTERNATIONAL MATERIALS REVIEWS (2013)
Impact of high density TSVs on the assembly of 3D-ICs packaging
C. C. Lee et al.
MICROELECTRONIC ENGINEERING (2013)
Preparing of nanostructured Al2O3-TiO2-ZrO2 composite powders and plasma spraying nanostructured composite coating
Yong Yang et al.
VACUUM (2013)
Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system
X. L. Fan et al.
APPLIED SURFACE SCIENCE (2012)
Finite element simulation of stress distribution and development in 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings during thermal shock
L. Wang et al.
APPLIED SURFACE SCIENCE (2012)
Finite element simulation of interface cracks in thermal barrier coatings
Martin Baeker
COMPUTATIONAL MATERIALS SCIENCE (2012)
Experiments and numerical simulations of single particle foreign object damage-like impacts of thermal barrier coatings
M. W. Crowell et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)
Influence of creep and cyclic oxidation in thermal barrier coatings
Philipp Seiler et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2012)
A Combined Finite Element-Multiple Criteria Optimization Approach for Materials Selection of Gas Turbine Components
A. Shanian et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2012)
Fabrication of oxidation protective coatings on C/C-SiC brake materials at room temperature
Yiguang Wang et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Effect of substrate temperature on the microstructure and properties of thick plasma-sprayed YSZ TBCs
S. A. Tsipas et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Finite element simulation of tensile bond strength of atmospheric plasma spraying thermal barrier coatings
Shen Wei et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Atmospheric plasma sprayed thermal barrier coatings with high segmentation crack densities: Spraying process, microstructure and thermal cycling behavior
M. Karger et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Effect of Residual Stresses and Prediction of Possible Failure Mechanisms on Thermal Barrier Coating System by Finite Element Method
M. Ranjbar-Far et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)
Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition
Zhenhua Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Nondissociative Adsorption of O2 on Ge(100)
X. L. Fan et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Investigation of stress field and failure mode of plasma sprayed Al2O3-13%TiO2 coatings under thermal shock
Y. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Uneven growth of thermally grown oxide and stress distribution in plasma-sprayed thermal barrier coatings
C. Che et al.
SURFACE & COATINGS TECHNOLOGY (2009)
The influence of oxides on the performance of advanced gas turbines
A. G. Evans et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Damage mechanisms and lifetime behavior of plasma sprayed thermal barrier coating systems for gas turbines - Part 1: Experiments
O. Trunova et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Cyclic behavior of EB-PVD thermal barrier coating systems with modified bond coats
Uwe Schulz et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Mechanisms of microstructure evolution in an austenitic stainless steel bond generated using a quaternary braze alloy
N. R. Philips et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Thermal cycling of EB-PVD/NiCoCrAlYHf thermal barrier coatings
Q. G. Xu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Effect of interface roughness and coating thickness on interfacial shear mechanical properties of EB-PVD yttria-partially stabilized zirconia thermal barrier coating systems
Shuqi Guo et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
A cohesive zone model with a large displacement formulation accounting for interfacial fibrilation
W. van den Bosch et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2007)
The effect of preoxidation atmosphere on oxidation behavior and thermal cycle life of thermal barrier coatings
Mineaki Matsumoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Phase stability, sintering, and thermal conductivity of plasma-sprayed ZrO2-Gd2O3 compositions for potential thermal barrier coating applications
MN Rahaman et al.
ACTA MATERIALIA (2006)
Numerical simulation of segmentation cracking in thermal barrier coatings by means of cohesive zone elements
M Bialas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Thick ceramic thermal barrier coatings with high durability deposited using solution-precursor plasma spray
A Jadhav et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Local accumulation of thermally grown oxide in plasma-sprayed thermal barrier coatings with rough top-coat/bond-coat interfaces
F Tang et al.
SCRIPTA MATERIALIA (2005)
Common failures in gas turbine blades
TJ Carter
ENGINEERING FAILURE ANALYSIS (2005)
Damage evolution in an electron beam physical vapor deposited thermal barrier coating as a function of cycle temperature and time
S Sridharan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Microscopic observation of degradation behavior in yttria and ceria stabilized zirconia thermal barrier coatings under hot corrosion
SY Park et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Stress variation with thermal cycling in the thermally grown oxide of an EB-PVD thermal barrier coating
S Sridharan et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Evaluation of interface degradation during cyclic oxidation of EB-PVD thermal barrier coatings and correlation with TGO luminescence
VK Tolpygo et al.
SURFACE & COATINGS TECHNOLOGY (2004)
A study of thermal fracture in functionally graded thermal barrier coatings using a cohesive zone model
S Rangaraj et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2004)
Emerging materials and processes for thermal barrier systems
CG Levi
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)
Numerical simulation of EBPVD thermal barrier coatings spallation
M Caliez et al.
ACTA MATERIALIA (2003)
Numerical investigation of residual stress fields and crack behavior in TBC systems
K Sfar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Materials science - Thermal barrier coatings for gas-turbine engine applications
NP Padture et al.
SCIENCE (2002)
Effects of defects on the thermal fatigue behavior of detonation-gun sprayed thermal barrier coatings
JH Kim et al.
METALS AND MATERIALS INTERNATIONAL (2001)
Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings
A Rabiei et al.
ACTA MATERIALIA (2000)
Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6Al-4V
JO Peters et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)