Related references
Note: Only part of the references are listed.Comparison of Various Mother Wavelets for Fault Classification in Electrical Systems
Chaichan Pothisarn et al.
APPLIED SCIENCES-BASEL (2020)
A Motor Current Signal-Based Bearing Fault Diagnosis Using Deep Learning and Information Fusion
Duy Tang Hoang et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)
Advanced machine learning techniques for building performance simulation: a comparative analysis
Debaditya Chakraborty et al.
JOURNAL OF BUILDING PERFORMANCE SIMULATION (2019)
Early detection of faults in HVAC systems using an XGBoost model with a dynamic threshold
Debaditya Chakraborty et al.
ENERGY AND BUILDINGS (2019)
A support vector machine based fault diagnostics of Induction motors for practical situation of multi-sensor limited data case
Purushottam Gangsar et al.
MEASUREMENT (2019)
Fault Diagnosis of Induction Motor Using Convolutional Neural Network
Jong-Hyun Lee et al.
APPLIED SCIENCES-BASEL (2019)
Fault Diagnosis System for Induction Motors by CNN Using Empirical Wavelet Transform
Yu-Min Hsueh et al.
SYMMETRY-BASEL (2019)
An Improved Cyclic Modulation Spectral Analysis Based on the CWT and Its Application on Broken Rotor Bar Fault Diagnosis for Induction Motors
Dong Zhen et al.
APPLIED SCIENCES-BASEL (2019)
Deep learning and its applications to machine health monitoring
Rui Zhao et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Intelligent Fault Diagnosis of Bearings Based on Energy Levels in Frequency Bands Using Wavelet and Support Vector Machines (SVM)
Seyed Majid Yadavar Nikravesh et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Deep Decoupling Convolutional Neural Network for Intelligent Compound Fault Diagnosis
Ruyi Huang et al.
IEEE ACCESS (2019)
Acoustic based fault diagnosis of three-phase induction motor
Adam Glowacz
APPLIED ACOUSTICS (2018)
Stacking Ensemble Learning for Short-Term Electricity Consumption Forecasting
Federico Divina et al.
ENERGIES (2018)
Regrouping particle swarm optimization based variable neural network for gearbox fault diagnosis
Yixiao Liao et al.
JOURNAL OF INTELLIGENT & FUZZY SYSTEMS (2018)
Intelligent fault diagnosis of rolling bearing using deep wavelet auto-encoder with extreme learning machine
Shao Haidong et al.
KNOWLEDGE-BASED SYSTEMS (2018)
A review on the application of deep learning in system health management
Samir Khan et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Rolling bearing fault feature learning using improved convolutional deep belief network with compressed sensing
Haidong Shao et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
A neural network constructed by deep learning technique and its application to intelligent fault diagnosis of machines
Feng Jia et al.
NEUROCOMPUTING (2018)
Overview of dynamic modelling and analysis of rolling element bearings with localized and distributed faults
Jing Liu et al.
NONLINEAR DYNAMICS (2018)
A Data-Driven Design for Fault Detection of Wind Turbines Using Random Forests and XGboost
Dahai Zhang et al.
IEEE ACCESS (2018)
A Comparison Between ANN, SVM and Least Squares SVM: Application in Multi-Fault Diagnosis of Rolling Element Bearing
Ashkan Moosavian et al.
INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION (2018)
A Hybrid Feature Model and Deep-Learning-Based Bearing Fault Diagnosis
Muhammad Sohaib et al.
SENSORS (2017)
Motor Current Signal Analysis Based on a Matched Subspace Detector
Elhoussin Elbouchikhi et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)
Multisensor Feature Fusion for Bearing Fault Diagnosis Using Sparse Autoencoder and Deep Belief Network
Zhuyun Chen et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Turker Ince et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2016)
Critical aspects on wavelet transforms based fault identification procedures in HV transmission line
Ahmed R. Adly et al.
IET GENERATION TRANSMISSION & DISTRIBUTION (2016)
Time-frequency atoms-driven support vector machine method for bearings incipient fault diagnosis
Ruonan Liu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)
Generator bearing fault diagnosis for wind turbine via empirical wavelet transform using measured vibration signals
Jinglong Chen et al.
RENEWABLE ENERGY (2016)
A Survey on Data Mining Techniques Applied to Electricity-Related Time Series Forecasting
Francisco Maritnez-Alvarez et al.
ENERGIES (2015)
Advanced Induction Motor Rotor Fault Diagnosis Via Continuous and Discrete Time-Frequency Tools
Joan Pons-Llinares et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)
A load identification method based on wavelet multi-resolution analysis
Zong Li et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Diagnostics of bearings in presence of strong operating conditions non-stationarity-A procedure of load-dependent features processing with application to wind turbine bearings
Radoslaw Zimroz et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2014)
Bearing Fault Model for Induction Motor With Externally Induced Vibration
Fabio Immovilli et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)
Detection and Diagnosis of Faults in Induction Motor Using an Improved Artificial Ant Clustering Technique
Abdenour Soualhi et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)
A gearbox fault diagnosis scheme based on near-field acoustic holography and spatial distribution features of sound field
Wenbo Lu et al.
JOURNAL OF SOUND AND VIBRATION (2013)
Time-frequency manifold correlation matching for periodic fault identification in rotating machines
Qingbo He et al.
JOURNAL OF SOUND AND VIBRATION (2013)
Feature extraction using wavelets and classification through decision tree algorithm for fault diagnosis of mono-block centrifugal pump
V. Muralidharan et al.
MEASUREMENT (2013)
Crack identification in double-cracked plates using wavelet analysis
Seyed Majid Yadavar Nikravesh et al.
MECCANICA (2013)
A future possibility of vibration based condition monitoring of rotating machines
Jyoti K. Sinha et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)
Application of correlation matching for automatic bearing fault diagnosis
Xiaofeng Liu et al.
JOURNAL OF SOUND AND VIBRATION (2012)
Effect of Internal Clearance on Load Distribution and Life of Radially Loaded Ball and Roller Bearings
Fred B. Oswald et al.
TRIBOLOGY TRANSACTIONS (2012)
Wavelet-based feature extraction and selection for classification of power system disturbances using support vector machines
Hueseyin Eristi et al.
ELECTRIC POWER SYSTEMS RESEARCH (2010)
Rolling element bearing fault detection using an improved combination of Hilbert and Wavelet transforms
Dong Wang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2009)
Bearing Fault Detection Via Stator Current Noise Cancellation and Statistical Control
Wei Zhou et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2008)
Models for bearing damage detection in induction motors using stator current monitoring
Martin Bloedt et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2008)
Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform
Chinmaya Kar et al.
JOURNAL OF SOUND AND VIBRATION (2008)
Cyclic spectral analysis of rolling-element bearing signals: Facts and fictions
J. Antoni
JOURNAL OF SOUND AND VIBRATION (2007)
Online diagnosis of induction motors using MCSA
Jee-Hoon Jung et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2006)
Dynamic modelling of spur gear pair and application of empirical mode decomposition-based statistical analysis for early detection of localized tooth defect
A. Parey et al.
JOURNAL OF SOUND AND VIBRATION (2006)
Continuous wavelet transform technique for fault signal diagnosis of internal combustion engines
JD Wu et al.
NDT & E INTERNATIONAL (2006)
An improved Hilbert-Huang transform and its application in vibration signal analysis
ZK Peng et al.
JOURNAL OF SOUND AND VIBRATION (2005)
Detection of crack location and size in structures using wavelet finite element methods
B Li et al.
JOURNAL OF SOUND AND VIBRATION (2005)