Related references
Note: Only part of the references are listed.PEM-Fuel Cell Catalyst Behavior between Room Temperature and Freezing Point
R. Kunkel et al.
FUEL CELLS (2020)
Materials, technological status, and fundamentals of PEM fuel cells - A review
Yun Wang et al.
MATERIALS TODAY (2020)
Innovative cathode flow-field design for passive air-cooled polymer electrolyte membrane (PEM) fuel cell stacks
Jaeseung Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Investigation of three system shut-down strategies alongside optimization suggestion for proton exchange membrane fuel cells via in-situ measurements
Yajun Wang et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2020)
Experimental and modelling studies of low temperature PEMFC performance
Sachin Chugh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Effects of Freeze-Thaw Thermal Cycles on the Mechanical Degradation of the Gas Diffusion Layer in Polymer Electrolyte Membrane Fuel Cells
Yanqin Chen et al.
POLYMERS (2019)
Degradation mechanisms in polymer electrolyte membrane fuel cells caused by freeze-cycles: Investigation using electrochemical impedance spectroscopy
Jarek P. Sabawa et al.
ELECTROCHIMICA ACTA (2019)
In Situ and Operando Characterization of Proton Exchange Membrane Fuel Cells
Quentin Meyer et al.
ADVANCED MATERIALS (2019)
A review on the approaches applied for cooling fuel cells
Mandi Ramezanizadeh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Impact of gas diffusion layer mechanics on PEM fuel cell performance
P. Irmscher et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Water distribution mapping in polymer electrolyte fuel cells using lock-in thermography
L. Rasha et al.
JOURNAL OF POWER SOURCES (2019)
A review of DC/DC converter-based electrochemical impedance spectroscopy for fuel cell electric vehicles
Hanging Wang et al.
RENEWABLE ENERGY (2019)
Top-Down Synthesis of Nanostructured Platinum-Lanthanide Alloy Oxygen Reduction Reaction Catalysts: PtxPr/C as an Example
Johannes Fichtner et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Three-dimensional simulation of a new cooling strategy for proton exchange membrane fuel cell stack using a non-isothermal multiphase model
Guobin Zhang et al.
APPLIED ENERGY (2019)
Introducing highly conductive materials into a fin for heat transfer enhancement
M. R. Hajmohammadi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Experimental study on temperature characteristics of an air-cooled proton exchange membrane fuel cell stack
Lizhong Luo et al.
RENEWABLE ENERGY (2019)
The role of hydrogen and fuel cells in the global energy system
Iain Staffell et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Can hydrogen fuel vehicles be a sustainable alternative on vehicle market?: Comparison of electric and hydrogen fuel cell vehicles
Jungwoo Shin et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2019)
Simultaneous thermal and visual imaging of liquid water of the PEM fuel cell flow channels
R. M. Aslam et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
An investigation into the effect of manifold geometry on uniformity of temperature distribution in a PEMFC stack
Amir Amirfazli et al.
ENERGY (2018)
A review of thermal conductivity of various nanofluids
Mohammad Hossein Ahmadi et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Phase Separation and Development of Proton Transport Pathways in Metal Oxide Nanoparticle/Nafion Composite Membranes during Water Uptake
Chongshan Yin et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Multi-phase models for water and thermal management of proton exchange membrane fuel cell: A review
Guobin Zhang et al.
JOURNAL OF POWER SOURCES (2018)
DEMS and Online Mass Spectrometry Studies of the Carbon Support Corrosion under Various Polymer Electrolyte Membrane Fuel Cell Operating Conditions
C. Cremers et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Microporous Layer Degradation in Polymer Electrolyte Membrane Fuel Cells
Hang Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Surface distortion as a unifying concept and descriptor in oxygen reduction reaction electrocatalysis
Raphael Chattot et al.
NATURE MATERIALS (2018)
Cold start of proton exchange membrane fuel cell
Yueqi Luo et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Investigation of the effect of micro-porous layer on PEM fuel cell cold start operation
Xu Xie et al.
RENEWABLE ENERGY (2018)
Air-cooled fuel cells: Keys to design and build the oxidant/cooling system
A. De las Heras et al.
RENEWABLE ENERGY (2018)
Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification
Pranay Shrestha et al.
JOURNAL OF POWER SOURCES (2018)
The Role of Compressive Stress on Gas Diffusion Media Morphology and Fuel Cell Performance
Robert W. Atkinson et al.
ACS APPLIED ENERGY MATERIALS (2018)
PEM Fuel Cell Start-Up/Shut-Down Losses vs Relative Humidity: The Impact of Water in the Electrode Layer on Carbon Corrosion
Thomas Mittermeier et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Integration of Miniature Heat Pipes into a Proton Exchange Membrane Fuel Cell for Cooling Applications
Navid Shirzadi et al.
HEAT TRANSFER ENGINEERING (2017)
PEM Fuel Cell Start-up/Shut-down Losses vs Temperature for Non-Graphitized and Graphitized Cathode Carbon Supports
Thomas Mittermeier et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Flow field bipolar plates in a proton exchange membrane fuel cell: Analysis & modeling
Huseyin Kahraman et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
A numerical study on thermal analysis and cooling flow fields effect on PEMFC performance
M. Ghasemi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Gas diffusion layer modifications and treatments for improving the performance of proton exchange membrane fuel cells and electrolysers: A review
Reza Omrani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of ambient air conditions on PEM fuel cell performance
Aleksandra Sveshnikova et al.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2017)
Oxygen Reduction Activity and Durability of Ordered and Disordered Pt3Co Alloy Nanoparticle Catalysts at Practical Temperatures of Polymer Electrolyte Fuel Cells
Hiroshi Yano et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells
Ebrahim Afshari et al.
JOURNAL OF THE ENERGY INSTITUTE (2017)
Hydrocarbon-Based Polymer Electrolyte Membranes: Importance of Morphology on Ion Transport and Membrane Stability
Dong Won Shin et al.
CHEMICAL REVIEWS (2017)
New Insights into Perfluorinated Sulfonic-Acid lonomers
Ahmet Kusoglu et al.
CHEMICAL REVIEWS (2017)
Nanostructure/Swelling Relationships of Bulk and Thin-Film PFSA Ionomers
Ahmet Kusoglu et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Compact open cathode feed system for PEMFCs
C. Y. Ling et al.
APPLIED ENERGY (2016)
Pt/IrO2 TiO2 cathode catalyst for low temperature polymer electrolyte fuel cell Application in MEAs, performance and stability issues
Alexandra Patru et al.
CATALYSIS TODAY (2016)
Atomic-scale restructuring of hollow PtNi/C electrocatalysts during accelerated stress tests
Laetitia Dubau et al.
CATALYSIS TODAY (2016)
Unveiling the crucial role of temperature on the stability of oxygen reduction reaction electrocatalysts
Laetitia Dubau et al.
ELECTROCHEMISTRY COMMUNICATIONS (2016)
3D CFD modeling of a PEM fuel cell stack
J. Macedo-Valencia et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Electro-thermal impedance spectroscopy applied to an open-cathode polymer electrolyte fuel cell
Erik Engebretsen et al.
JOURNAL OF POWER SOURCES (2016)
Impact of heat and water management on proton exchange membrane fuel cells degradation in automotive application
E. Nandjou et al.
JOURNAL OF POWER SOURCES (2016)
Evaluation of a 2.5 kWel automotive low temperature PEM fuel cell stack with extended operating temperature range up to 120°C
Tiziana Ruiu et al.
JOURNAL OF POWER SOURCES (2016)
Ice Formation Processes in PEM Fuel Cell Catalyst Layers during Cold Startup Analyzed by Cryo-SEM
Yutaka Tabe et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Effects of operation temperature and reactant gas humidity levels on performance of PEM fuel cells
Dilek Nur Ozen et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Ultrafine jagged platinum nanowires enable ultrahigh mass activity for the oxygen reduction reaction
Mufan Li et al.
SCIENCE (2016)
Size-Controlled Synthesis of Sub-10 nm PtNi3 Alloy Nanoparticles and their Unusual Volcano-Shaped Size Effect on ORR Electrocatalysis
Lin Gan et al.
SMALL (2016)
Thermal Imaging of Electrochemical Power Systems: A Review
James B. Robinson et al.
JOURNAL OF IMAGING (2016)
Engineered Water Highways in Fuel Cells: Radiation Grafting of Gas Diffusion Layers
Antoni Forner-Cuenca et al.
ADVANCED MATERIALS (2015)
A review of the gas diffusion layer in proton exchange membrane fuel cells: Durability and degradation
Jaeman Park et al.
APPLIED ENERGY (2015)
Flat heat pipes for potential application in fuel cell cooling
Marcos Vinicio Oro et al.
APPLIED THERMAL ENGINEERING (2015)
Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells
Binghong Han et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Modeling the temperature distribution and performance of a PEM fuel cell with thermal contact resistance
Tao-Feng Cao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Model based temperature controller development for water cooled PEM fuel cell systems
Yasemin Saygili et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Study of water accumulation dynamics in the channels of an open-cathode fuel cell through electro-thermal characterisation and droplet visualisation
Oluwamayowa A. Obeisun et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Temperature distribution on anodic surface of membrane electrode assembly in proton exchange membrane fuel cell with interdigitated flow bed
Hang Guo et al.
JOURNAL OF POWER SOURCES (2015)
Carbon Corrosion in Proton-Exchange Membrane Fuel Cells: Effect of the Carbon Structure, the Degradation Protocol, and the Gas Atmosphere
Luis Castanheira et al.
ACS CATALYSIS (2015)
Tuning the Performance and the Stability of Porous Hollow PtNi/C Nanostructures for the Oxygen Reduction Reaction
Laetitia Dubau et al.
ACS CATALYSIS (2015)
Characterization of the thermolysis products of Nafion membrane: A potential source of perfluorinated compounds in the environment
Mingbao Feng et al.
SCIENTIFIC REPORTS (2015)
Morphology of Hydrated As-Cast Nafion Revealed through Cryo Electron Tomography
Frances I. Allen et al.
ACS MACRO LETTERS (2015)
Toyota MIRAI Fuel Cell Vehicle and Progress Toward a Future Hydrogen Society
Toshihiko Yoshida et al.
ELECTROCHEMICAL SOCIETY INTERFACE (2015)
Investigation of the effect of a hydrophilic layer in the gas diffusion layer of a polymer electrolyte membrane fuel cell on the cell performance and cold start behaviour
Satoki Hirakata et al.
ELECTROCHIMICA ACTA (2014)
Review of Advanced Materials for Proton Exchange Membrane Fuel Cells
Alexander Kraytsberg et al.
ENERGY & FUELS (2014)
Theoretical analysis of supercooled states of water generated below the freezing point in a PEFC
Yuji Ishikawa et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Effect of temperature uncertainty on polymer electrolyte fuel cell performance
Mozhdeh Noorkami et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Preparation and Testing of Nafion/Titanium Dioxide Nanocomposite Membrane Electrode Assembly by Ultrasonic Coating Technique
Yilser Devrim
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Study of the effect of temperature on Pt dissolution in polymer electrolyte membrane fuel cells via accelerated stress tests
S. R. Dhanushkodi et al.
JOURNAL OF POWER SOURCES (2014)
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen Chen et al.
SCIENCE (2014)
Design criteria for stable Pt/C fuel cell catalysts
Josef C. Meier et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2014)
Temperature Effect on Proton Exchange Membrane Fuel Cell Performance Part II: Parametric Study
Hamid Kazemi Esfeh et al.
INTERNATIONAL CONFERENCE ON APPLIED ENERGY, ICAE2014 (2014)
Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application
Jason Clement et al.
APPLIED THERMAL ENGINEERING (2013)
Nafion®/histidine functionalized carbon nanotube: High-performance fuel cell membranes
Mahsa S. Asgari et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) - A review
Amrit Chandan et al.
JOURNAL OF POWER SOURCES (2013)
Quantifying the Structural Changes of Perfluorosulfonated Acid Ionomer upon Reaction with Hydroxyl Radicals
Lida Ghassemzadeh et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Measurements of Electrode Temperatures, Heat and Water Fluxes in PEMFCs: Conclusions about Transfer Mechanisms
A. Thomas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
In-Situ Temperature Measurement on Cathode GDL in a PEMFC Using an Optical Fiber Temperature Sensor
K. Inman et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Water management in proton exchange membrane fuel cell at sub-zero temperatures: An in operando SANS-EIS coupled study
Arnaud Morin et al.
SOLID STATE IONICS (2013)
Durability of carbon nanofiber (CNF) & carbon nanotube (CNT) as catalyst support for Proton Exchange Membrane Fuel Cells
Shuang Ma Andersen et al.
SOLID STATE IONICS (2013)
CeO2 Surface Oxygen Vacancy Concentration Governs in Situ Free Radical Scavenging Efficacy in Polymer Electrolytes
Panagiotis Trogadas et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Factors determining the gas crossover through pinholes in polymer electrolyte fuel cell membranes
Stefan Kreitmeier et al.
ELECTROCHIMICA ACTA (2012)
A review of gas diffusion layer in PEM fuel cells: Materials and designs
Sehkyu Park et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
A critical review of cooling techniques in proton exchange membrane fuel cell stacks
Guangsheng Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Activity, Structure and Degradation of Dealloyed PtNi3 Nanoparticle Electrocatalyst for the Oxygen Reduction Reaction in PEMFC
Frederic Hasche et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Local Catalyst Support Degradation during Polymer Electrolyte Fuel Cell Start-Up and Shutdown
Stefan Kreitmeier et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
PtCu3, PtCu and Pt3Cu Alloy Nanoparticle Electrocatalysts for Oxygen Reduction Reaction in Alkaline and Acidic Media
Mehtap Oezaslan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Impact of metal cations on the electrocatalytic properties of Pt/C nanoparticles at multiple phase interfaces
Julien Durst et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)
Temperature profiles of an air-cooled PEM fuel cell stack under active and passive cooling operation
R. Atan et al.
INTERNATIONAL SYMPOSIUM ON ROBOTICS AND INTELLIGENT SENSORS 2012 (IRIS 2012) (2012)
Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and fans combined
Chih-Yung Wen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Characterisation of a re-cast composite Nafion® 1100 series of proton exchange membranes incorporating inert inorganic oxide particles
S. M. Slade et al.
ELECTROCHIMICA ACTA (2010)
Investigation of freeze/thaw durability in polymer electrolyte fuel cells
Soo-Jin Lim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Investigation of physical properties and cell performance of Nafion/TiO2 nanocomposite membranes for high temperature PEM fuel cells
M. Amjadi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
In situ hybrid Nafion/SiO2-P2O5 proton conductors for high-temperature and low-humidity proton exchange membrane fuel cells
Soon Yong So et al.
JOURNAL OF MEMBRANE SCIENCE (2010)
Surface Properties of Pt and PtCo Electrocatalysts and Their Influence on the Performance and Degradation of High-Temperature Polymer Electrolyte Fuel Cells
Antonino Salvatore Arico et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Electrochemical and Structural Study of a Chemically Dealloyed PtCu Oxygen Reduction Catalyst
Indrajit Dutta et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Computational study of forced air-convection in open-cathode polymer electrolyte fuel cell stacks
A. P. Sasmito et al.
JOURNAL OF POWER SOURCES (2010)
On the temperature distribution in polymer electrolyte fuel cells
J. G. Pharoah et al.
JOURNAL OF POWER SOURCES (2010)
Design of an optical thermal sensor for proton exchange membrane fuel cell temperature measurement using phosphor thermometry
Kristopher Inman et al.
JOURNAL OF POWER SOURCES (2010)
Durability of Pt3Co/C Cathodes in a 16 Cell PEMFC Stack: Macro/Microstructural Changes and Degradation Mechanisms
L. Dubau et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Simultaneous In Situ Measurement of Temperature and Relative Humidity in a PEMFC Using Optical Fiber Sensors
N. A. David et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Platinum-Alloy Cathode Catalyst Degradation in Proton Exchange Membrane Fuel Cells: Nanometer-Scale Compositional and Morphological Changes
Shuo Chen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
In-fibre Bragg grating sensors for distributed temperature measurement in a polymer electrolyte membrane fuel cell
Nigel A. David et al.
JOURNAL OF POWER SOURCES (2009)
Effect of operating conditions on carbon corrosion in polymer electrolyte membrane fuel cells
Katie Heeyum Lim et al.
JOURNAL OF POWER SOURCES (2009)
Proton Conduction and Oxygen Reduction Kinetics in PEM Fuel Cell Cathodes: Effects of Ionomer-to-Carbon Ratio and Relative Humidity
Yuxiu Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Polymer electrolyte fuel cells using nafion-based composite membranes with functionalized carbon nanotubes
Ramaiyan Kannan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)
Novel Organic-Inorganic Hybrids with Increased Water Retention for Elevated Temperature Proton Exchange Membrane Application
Mayur K. Mistry et al.
CHEMISTRY OF MATERIALS (2008)
Poly(oxyalkylene)diamine-functionalized carbon nanotube/perfluorosulfonated polymer composites: Synthesis, water state, and conductivity
Wei-Fu Chen et al.
CHEMISTRY OF MATERIALS (2008)
Effect of humidity of reactants on the cell performance of PEM fuel cells with parallel and interdigitated flow field designs
Xiao-Dong Wang et al.
JOURNAL OF POWER SOURCES (2008)
Transient air cooling thermal modeling of a PEM fuel cell
K. P. Adzakpa et al.
JOURNAL OF POWER SOURCES (2008)
Short-side-chain proton conducting perfluorosulfonic acid ionomers: Why they perform better in PEM fuel cells
K. D. Kreuer et al.
JOURNAL OF POWER SOURCES (2008)
Performance and degradation of high temperature polymer electrolyte fuel cell catalysts
A. S. Arico et al.
JOURNAL OF POWER SOURCES (2008)
Degradation effects in polymer electrolyte membrane fuel cell stacks by sub-zero operation - An in situ and ex situ analysis
R. Alink et al.
JOURNAL OF POWER SOURCES (2008)
A review of the main parameters influencing long-term performance and durability of PEM fuel cells
Wolfgang Schmittinger et al.
JOURNAL OF POWER SOURCES (2008)
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Jinfeng Wu et al.
JOURNAL OF POWER SOURCES (2008)
Temperature effects on PEM fuel cells Pt/C catalyst degradation
Wu Bi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120-200 °C
Jianlu Zhang et al.
JOURNAL OF POWER SOURCES (2007)
PEM fuel cell reaction kinetics in the temperature range of 23-120°C
Chaojie Song et al.
ELECTROCHIMICA ACTA (2007)
Improved oxygen reduction activity on Pt3Ni(111) via increased surface site availability
Vojislav R. Stamenkovic et al.
SCIENCE (2007)
PEM fuel cell Pt/C dissolution and deposition in nafion electrolyte
Wu Bi et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)
PEM fuel cell electrocatalyst durability measurements
Rod L. Borup et al.
JOURNAL OF POWER SOURCES (2006)
Spatially resolved optical measurements of water partial pressure and temperature in a PEM fuel cell under dynamic operating conditions
S. Basu et al.
JOURNAL OF POWER SOURCES (2006)
Effect of flow and temperature distribution on the performance of a PEM fuel cell stack
Jaewan Park et al.
JOURNAL OF POWER SOURCES (2006)
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components
Qiangu Yan et al.
JOURNAL OF POWER SOURCES (2006)
Stabilization of platinum clusters by substitutional boron dopants in carbon supports
Chethan K. Acharya et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2006)
Preparation and characterization of sulfated zirconia(SO42-/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity
Yunfeng Zhai et al.
JOURNAL OF MEMBRANE SCIENCE (2006)
Investigation of water transport through membrane in a PEM fuel cell by water balance experiments
Qiangu Yan et al.
JOURNAL OF POWER SOURCES (2006)
Temperature distribution on the MEA surface of a PEMFC with serpentine channel flow bed
Maohai Wang et al.
JOURNAL OF POWER SOURCES (2006)
Influence of nitrogen doping on oxygen reduction electrocatalysis at carbon nanofiber electrodes
S Maldonado et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2005)
Thermal degradation of the support in carbon-supported platinum electrocatalysts for PEM fuel cells
DA Stevens et al.
CARBON (2005)
A reverse-current decay mechanism for fuel cells
CA Reiser et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
Challenges and opportunities of thermal management issues related to fuel cell technology and modeling
A Faghri et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Effect of elevated temperature and reduced relative humidity on ORR kinetics for PEM fuel cells
H Xu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Effect of relative humidity on oxygen reduction kinetics in a PEMFC
KC Neyerlin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Thermal conductivities from temperature profiles in the polymer electrolyte fuel cell
PJS Vie et al.
ELECTROCHIMICA ACTA (2004)
Visualization of the membrane temperature field of a polymer electrolyte fuel cell
R Shimoi et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2004)
A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding
A Hakenjos et al.
JOURNAL OF POWER SOURCES (2004)
Thermal conductivity of polycrystalline zinc selenide
NV Lugueva et al.
PHYSICS OF THE SOLID STATE (2003)
Localization of weak heat sources in electronic devices using highly sensitive lock-in thermography
JP Rakotoniaina et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2002)
Carbon monoxide poisoning of proton exchange membrane fuel cells
JJ Baschuk et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2001)