Effect of adsorption of catanionic surfactant mixtures on wettability of quartz surface

The adsorption behaviors of dodecyl trimethyl ammonium bromide (C12TAB) and the catanionic mixtures of C12TAB with sodium dodecyl sulfate (SDS), sodium dodecyl sulfonate (SDDS) and sodium dodecanoate (DAS) on quartz surface have been investigated. Physicochemical parameters such as the critical micelle concentration (CMC), surface tension, contact angle, adhesional tension and work of adhesion have been estimated. At the interface of quartz and aqueous solution of catanionic mixture, there is a competition between anionic surfactants and quartz surface in attracting cationic surfactants. SDDS and DAS fail to inhibit the adsorption of C12TAB because of the smaller size and less negative charge of the head-groups, even the amount of anionic surfactants well surpasses that of C12TAB. Instead the anionic surfactants are dragged by cationic surfactants to quartz surface and form a mixed monolayer on the quartz surface. The insert of anionic surfactants reduces the repulsion between the cationic molecules and results in closer packing of molecules in adsorption layers. Thus, SDDS-C12TAB and DAS-C12TAB have displayed stronger hydrophobic modification at quartz surface than pure C12TAB. However, the electrostatic attraction between excessive SDS and C12TAB is strong enough to constrain C12TAB and decreases the adsorption on quartz surface. Only a small amount of catanionic complexes with the structure like zwitterionic surfactant adsorb on quartz through the interaction between the positive sites of surfactant complexes and negative sites of quartz. Over CMC, bilayers are formed on quartz surface in the systems of SDDSC12TAB and DAS-C12TAB, while micelle structures are adsorbed on quartz surface for SDS-C12TAB. (C) 2016 Elsevier B.V. All rights reserved.