Related references
Note: Only part of the references are listed.Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction
Andrei Veksha et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Environmental impact assessment of converting flexible packaging plastic waste to pyrolysis oil and multi-walled carbon nanotubes
Ashiq Ahamed et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
A review on hydrothermal carbonization of biomass and plastic wastes to energy products
Yafei Shen
BIOMASS & BIOENERGY (2020)
Grain size dependent distribution of different plastic types in coarse shredded mixed commercial and municipal waste
S. Moellnitz et al.
WASTE MANAGEMENT (2020)
Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods
Zhitong Yao et al.
WASTE MANAGEMENT & RESEARCH (2020)
Thermal degradation of waste plastics under non-sweeping atmosphere: Part 2: Effect of process temperature on product characteristics and their future applications
Rohit Kumar Singh et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)
A synergistic study of reaction kinetics and heat transfer with multi-component modelling approach for the pyrolysis of biomass waste
Hammad Siddiqi et al.
ENERGY (2020)
Pyrolysis behavior and product distributions of biomass six group components: Starch, cellulose, hemicellulose, lignin, protein and oil
Peijie Zong et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Analysis of emissions from combusting pyrolysis products
Nicholas R. Schwartz et al.
FUEL (2020)
Torrefaction of biomass and plastic from municipal solid waste streams and their blends: Evaluation of interactive effects
Yogeshwari Pooja Rago et al.
FUEL (2020)
Recycling of polymer laminated aluminum packaging (PLAP) materials into carbonaceous metallic microparticles
Abdullah Al Mahmood et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Pyrolysis kinetic behavior and TG-FTIR-GC-MS analysis of metallised food packaging plastics
Samy Yousef et al.
FUEL (2020)
Thermal degradation of corn starch based biodegradable plastic plates and determination of kinetic parameters by isoconversional methods using thermogravimetric analyzer
Satyanarayan Patnaik et al.
JOURNAL OF THE ENERGY INSTITUTE (2020)
TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE)
Xingping Kai et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Thermo-delamination of metallised composite plastic: An innovative approach to generate Aluminium from packaging plastic waste
Songyan Yin et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effects of heating rate on fast pyrolysis behavior and product distribution of Jerusalem artichoke stalk by using TG-FTIR and Py-GC/MS
Bo Wang et al.
RENEWABLE ENERGY (2019)
Pyrolysis of mixed municipal solid waste: Characterisation, interaction effect and kinetic modelling using the thermogravimetric approach
Vibhuti Chhabra et al.
WASTE MANAGEMENT (2019)
Optimization of the pyrolysis process of a plastic waste to obtain a liquid fuel using different mathematical models
L. Quesada et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
The behavior of heteroatom compounds during the pyrolysis of waste computer casing plastic under various heating conditions
Chuan Ma et al.
JOURNAL OF CLEANER PRODUCTION (2019)
LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore
Hsien H. Khoo
RESOURCES CONSERVATION AND RECYCLING (2019)
A sustainable bioenergy conversion strategy for textile waste with self-catalysts using mini-pyrolysis plant
Samy Yousef et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Pyrolysis of typical MSW components by Py-GC/MS and TG-FTIR
Wenchao Ma et al.
FUEL (2019)
Effective use of aluminum-plastic laminate as a feedstock for catalytic pyrolysis over micro and mesoporous catalysts
Muhammad Zain Siddiqui et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Characterization of fuel produced by pyrolysis of plastic film obtained of municipal solid waste
L. Quesada et al.
ENERGY (2019)
Thermal behavior, kinetics and fast pyrolysis characteristics of palm oil: Analytical TG-FTIR and Py-GC/MS study
Yingyun Qiao et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Catalytic pyrolysis of plastic waste for the production of liquid fuels for engines
Supattra Budsaereechai et al.
RSC ADVANCES (2019)
Microrecycling of the metal-polymer-laminated packaging materials via thermal disengagement technology
Abdullah Al Mahmood et al.
SN APPLIED SCIENCES (2019)
Thermal behavior and pyrolytic degradation kinetics of polymeric mixtures from waste packaging plastics
R. Tuffi et al.
EXPRESS POLYMER LETTERS (2018)
Sustainable approach to recycling of multilayer flexible packaging using switchable hydrophilicity solvents
Tamari Mumladze et al.
GREEN CHEMISTRY (2018)
The effect of plastic film transmittance on heat transfer in a multilayer insulation structure of rectangular air cells for frozen food wrapping
Jacek Kasperski et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)
Study of the thermal behavior, kinetics, and product characterization of biomass and low-density polyethylene co-pyrolysis by thermogravimetric analysis and pyrolysis-GC/MS
Yunwu Zheng et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)
Cleaner and profitable industrial technology for full recovery of metallic and non-metallic fraction of waste pharmaceutical blisters using switchable hydrophilicity solvents
Samy Yousef et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Recovery of valuable products from hazardous aluminum dross: A review
Arunabh Meshram et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Plastic flexible films waste management - A state of art review
O. Horodytska et al.
WASTE MANAGEMENT (2018)
Kinetic study for the co-pyrolysis of lignocellulosic biomass and plastics using the distributed activation energy model
M. V. Navarro et al.
ENERGY (2018)
Kinetic identification of plastic waste pyrolysis on zeolite-based catalysts
Zoltan Till et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel
Pallab Das et al.
WASTE MANAGEMENT (2018)
Gasification of non-recycled plastic packaging material containing aluminum: Hydrogen energy production and aluminum recovery
Cheng-Han Lu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
Life cycle assessment of the recycling of Al-PE (a laminated foil made from polyethylene and aluminum foil) composite packaging waste
Minghui Xie et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Kinetics of Pyrolysis of Mixed Municipal Solid Waste- A Review
V. Chhabra et al.
WASTE MANAGEMENT FOR RESOURCE UTILISATION (2016)
Development of a modified independent parallel reactions kinetic model and comparison with the distributed activation energy model for the pyrolysis of a wide variety of biomass fuels
Stelios Sfakiotakis et al.
BIORESOURCE TECHNOLOGY (2015)
Study on pyrolytic kinetics and behavior: The co-pyrolysis of microalgae and polypropylene
Xiuyun Wu et al.
BIORESOURCE TECHNOLOGY (2015)
Optimizing and developing a continuous separation system for the wet process separation of aluminum and polyethylene in aseptic composite packaging waste
Dahai Yan et al.
WASTE MANAGEMENT (2015)
Solvent effect in the polyethylene recovery from multilayer postconsumer aseptic packaging
Alejandro Cervantes-Reyes et al.
WASTE MANAGEMENT (2015)
Fuel from microwave assisted pyrolysis of waste multilayer packaging beverage
Andrea Undri et al.
FUEL (2014)
Aluminum oxide barrier coatings on polymer films for food packaging applications
C. F. Struller et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Pyrolysis technologies for municipal solid waste: A review
Dezhen Chen et al.
WASTE MANAGEMENT (2014)
Sensitivity analysis applied to independent parallel reaction model for pyrolysis of bagasse
K. G. Santos et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)
Thermal degradation behaviors of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanisms
A. Aboulkas et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
New EU regulation aspects and global market of active and intelligent packaging for food industry applications
Donatella Restuccia et al.
FOOD CONTROL (2010)
Modeling pyrolysis kinetics of plastic mixtures
Ujwala Hujuri et al.
POLYMER DEGRADATION AND STABILITY (2008)