Related references
Note: Only part of the references are listed.Natural fiber-reinforced composites: A review on material, manufacturing, and machinability
Amirhossein Lotfi et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
Influence of different piercing methods of abrasive waterjet on delamination of fiber reinforced composite laminate
Garam Kim et al.
COMPOSITE STRUCTURES (2020)
Experimental study on drilling of jute fiber reinforced polymer composites
Hadi Rezghi Maleki et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Effect of thermal properties on laser cutting of continuous glass and carbon fiber-reinforced polyamide 6 composites
Patrick Hirsch et al.
MACHINING SCIENCE AND TECHNOLOGY (2019)
Effect of lay-up configuration and processing parameters on surface quality during fiber laser cutting of CFRP laminates
Maojun Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Review on effect machining parameters on performance of natural fibre-reinforced composites (NFRCs)
T. Rajmohan et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
A. Diaz-Alvarez et al.
COMPOSITE STRUCTURES (2019)
An experimental study on milling of natural fiber (jute)- reinforced polymer composites
Yahya H. Celik et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Synthesis, characterization and machinability studies on thin hybrid composites with SiC nano particles
S. M. Mullaikodi et al.
MATERIALS RESEARCH EXPRESS (2019)
Tribo-functional effects of double-crossed helix on surface finish, cutting friction and tool wear mechanisms during the milling process of natural fiber composites
Faissal Chegdani et al.
WEAR (2019)
Physical and mechanical properties of polyvinylidene fluoride - Short sugar palm fiber nanocomposites
M. H. Alaaeddin et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Laser beam machining of carbon fiber reinforced composites: a review
M. H. El-Hofy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Comprehensive investigation of surface quality and mechanical properties in CO2 laser drilling of GFRP composites
Ali Solati et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experimental investigation on drilling of natural flax fiber-reinforced composites
H. Rezghi Maleki et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Influence of Abrasive Waterjet Parameters on the Cutting and Drilling of CFRP/UNS A97075 and UNS A97075/CFRP Stacks
Raul Ruiz-Garcia et al.
MATERIALS (2019)
Parametric study of laser cutting of carbon fibre reinforced polymer (CFRP) and the effect of fibre orientation on cutting quality
Mohammad Shahid Raza et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2019)
Effect of the Process Parameters on Machining of GFRP Composites for Different Conditions of Abrasive Water Suspension Jet Machining
K. Ramesha et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining
Irina M. M. Wong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Abrasive water jet machining of fiber-reinforced composite materials
S. Vigneshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
AWJ machinability performance of CS/UPR composites with the effect of chemical treatment
S. Kalirasu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Experimental analysis of drilling induced damage in biocomposites
Antonio Diaz-Alvarez et al.
TEXTILE RESEARCH JOURNAL (2018)
Study on fibre laser machining quality of plain woven CFRP laminates
Maojun Li et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Machining and its challenges on bio-fibre reinforced plastics: A critical review
R. Vinayagamoorthy et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Characterization and optimization of Abrasive Water Jet Machining parameters of aluminium/tungsten carbide composites
K. Ravi Kumar et al.
MEASUREMENT (2018)
Experimental analysis of Nd-YAG laser cutting of sheet materials - A review
Amit Sharma et al.
OPTICS AND LASER TECHNOLOGY (2018)
Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses
Hom Nath Dhakal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Research on water jet cutting of composites based on epoxy/microparticles from coconut shell
Miroslav Mueller et al.
INNOVATIVE TECHNOLOGIES IN ENGINEERING PRODUCTION (ITEP'18) (2018)
Abrasive Water Jet Machining of Multidirectional CFRP Laminates
M. El-Hofy et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Machinability of natural fiber reinforced composites: a review
Mahmoud M. A. Nassar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Performance Evaluation of Abrasive Water Jet Machining on Banana Fiber Reinforced Polyester Composite
V. Arumuga Prabu et al.
JOURNAL OF NATURAL FIBERS (2017)
Numerical simulation of metal removal in laser drilling using radial point interpolation method
Diaa Abidou et al.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2017)
Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet
Ajit Dhanawade et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Roundness and Taper of Holes During Drilling Composites of Various Thickness by HSS Drill bit under Dry Condition
M. S. Sakib et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED SCIENCE (ICMEAS 2017) (2017)
Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates
Sikiru Oluwarotimi Ismail et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
A study about hole making in woven jute fabric-reinforced polymer composites
Temesgen Berhanu Yallew et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2016)
Abrasive Water Jet Machining of Carbon Epoxy Composite
Ajit Dhanawade et al.
DEFENCE SCIENCE JOURNAL (2016)
Laser cutting of carbon fibre reinforced plastics of high thickness
Dirk Herzog et al.
MATERIALS & DESIGN (2016)
Machinablity of Hybrid Natural Fiber Composite with and without Filler as Reinforcement
S. P. Jani et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJM
S. Kalirasu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Multiple-objective optimization in precision laser cutting of different thermoplastics
K. F. Tamrin et al.
OPTICS AND LASERS IN ENGINEERING (2015)
Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics
F. Chegdani et al.
WEAR (2015)
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Layth Mohammed et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
Experimental Study on Surface Roughness in Abrasive Water Jet Cutting
Derzija Begic-Hajdarevic et al.
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 (2015)
Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry
Faris M. AL-Oqla et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Challenges and Alternatives to Plastics Recycling in the Automotive Sector
Lindsay Miller et al.
MATERIALS (2014)
A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites
Naheed Saba et al.
POLYMERS (2014)
Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite
S. Jayabal et al.
FIBERS AND POLYMERS (2013)
Hole quality evaluation of natural fiber composite using image analysis technique
N. Venkateshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Composite Cutting with Abrasive Water Jet
A. Alberdi et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) (2013)
CO2 laser cutting of phenolic resin boards
F. Quintero et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Investigating the CO2 laser cutting parameters of MDF wood composite material
H. A. Eltawahni et al.
OPTICS AND LASER TECHNOLOGY (2011)
Material selection of polymeric composite automotive bumper beam using analytical hierarchy process
A. Hambali et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2010)
Effect of feed rate on surface roughness in abrasive waterjet cutting applications
A Akkurt et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Share Paper
