Related references
Note: Only part of the references are listed.Cerium in aluminum alloys
Frank Czerwinski
JOURNAL OF MATERIALS SCIENCE (2020)
Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys
Philipp Kuernsteiner et al.
ADDITIVE MANUFACTURING (2020)
Critical Assessment 36: Assessing differences between the use of cerium and scandium in aluminium alloying
Frank Czerwinski
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Gas-Enhanced Ultrahigh-Shear Mixing: An Application to Molten Aluminum Alloys
Frank Czerwinski et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Effect of Trace Addition of Ceramic on Microstructure Development and Mechanical Properties of Selective Laser Melted AlSi10Mg Alloy
Yuxin Li et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2020)
Improved Tensile Strength of Al-5Ce Alloy by Permanent Magnet Stirring
Liyang Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Recent progress in laser additive manufacturing of aluminum matrix composites
Bo Chen et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Improved High-Temperature Aluminum Alloys Containing Cerium
David Weiss
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Thermal stability of nanocrystalline Al-10Fe-5Cr bulk alloy
Muneer Baig et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Coarsening of Al3Sc precipitates in Al-Mg-Sc alloys
Pian Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced High-Temperature Mechanical Properties of Al-Cu-Li Alloy through T1 Coarsening Inhibition and Ce-Containing Intermetallic Refinement
Xinxiang Yu et al.
MATERIALS (2019)
Effect of Fe Addition on Heat-Resistant Aluminum Alloys Produced by Selective Laser Melting
Shigeto Yamasaki et al.
METALS (2019)
Thermal stability of ultrafine grained AA8090 Al-Li alloy processed by repetitive corrugation and straightening
Jenix Rino John Xavier Raj et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Towards a high strength aluminium alloy development methodology for selective laser melting
Qingbo Jia et al.
MATERIALS & DESIGN (2019)
Size-dependent diffusion controls natural aging in aluminium alloys
Phillip Dumitraschkewitz et al.
NATURE COMMUNICATIONS (2019)
Aluminum with dispersed nanoparticles by laser additive manufacturing
Ting-Chiang Lin et al.
NATURE COMMUNICATIONS (2019)
Strengthening mechanisms in Al-Ni-Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates
C. Suwanpreecha et al.
ACTA MATERIALIA (2019)
New generation of eutectic Al-Ni casting alloys for elevated temperature services
C. Suwanpreecha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors
Song-Yi Kim et al.
SCIENTIFIC REPORTS (2018)
Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review
Ali Abd El-Aty et al.
JOURNAL OF ADVANCED RESEARCH (2018)
Development of Heat-Resistant Aluminum Alloys for Electrical Engineering Purposes Based on the Al - Fe - Si System
I. S. Loginova et al.
METAL SCIENCE AND HEAT TREATMENT (2018)
Synthesis and Characterization of Al-alloy by Mechanical alloying
Satyajeet Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Thermal stability of nanocrystalline materials: thermodynamics and kinetics
H. R. Peng et al.
INTERNATIONAL MATERIALS REVIEWS (2017)
Modern Aspects of Liquid Metal Engineering
Frank Czerwinski
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)
Gas-Enhanced Ultra-High Shear Mixing: A Concept and Applications
Frank Czerwinski et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)
THERMODYNAMIC ASSESSMENT OF THE Al-Mo-V TERNARY SYSTEM
B. Hu et al.
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY (2017)
Thermal Stability of Cryomilled Al-Mg-Er Powders
Bamidele Akinrinlola et al.
JOURNAL OF NANOMATERIALS (2017)
Experimental investigation of eutectic point in Al-rich Al-La, Al-Ce, Al-Pr and Al-Nd systems
Cao Zujun et al.
JOURNAL OF RARE EARTHS (2017)
Ageing characteristics and high-temperature tensile properties of Al-Si-Cu-Mg alloys with micro-additions of Mo and Mn
S. K. Shaha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
About Alloying of Aluminum Alloys with Transition Metals
V. V. Zakharov
METAL SCIENCE AND HEAT TREATMENT (2017)
Thermal stability of the lightweight 2099 Al-Cu-Li alloy: Tensile tests and microstructural investigations after overaging
E. Balducci et al.
MATERIALS & DESIGN (2017)
Analysis of thermal temperature fields and thermal stress under steady temperature field of diesel engine piston
Yaohui Lu et al.
APPLIED THERMAL ENGINEERING (2017)
Effect of elevated temperature on the fatigue strength of casted A1Si8Cu3 aluminium alloys
C. Garb et al.
3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017) (2017)
In situ structural characterization of ageing kinetics in aluminum alloy 2024 across angstrom-to-micrometer length scales
Fan Zhang et al.
ACTA MATERIALIA (2016)
Supplemental Literature Review of Binary Phase Diagrams: Al-Nd, Al-Sm, Al-V, Bi-Yb, Ca-In, Ca-Sb, Cr-Nb, Cu-Ga, Ge-O, Pt-Sn, Re-Y, and Te-Yb
H. Okamoto
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2016)
The Al-Rich Part of the Fe-Al Phase Diagram
Xiaolin Li et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2016)
Ageing characteristics and high-temperature tensile properties of Al-Si-Cu-Mg alloys with micro-additions of Cr, Ti, V and Zr
S. K. Shaha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Long-term thermal stability of Equal Channel Angular Pressed 2024 aluminum alloy
Guher Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructural evolution, mechanical property and thermal stability of Al-Li 2198-T8 alloy processed by high pressure torsion
Jian Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The influence of microwave radiation on the thermal stability of aluminum nanopowder
A. V. Mostovshchikov et al.
TECHNICAL PHYSICS LETTERS (2016)
Experimental investigation on the post-fire mechanical properties of structural aluminum alloys 6061-T6 and 7075-T73
Zhihua Chen et al.
THIN-WALLED STRUCTURES (2016)
Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys
Saleh A. Alkahtani et al.
MATERIALS (2016)
The reactive element effect on high-temperature oxidation of magnesium
F. Czerwinski
INTERNATIONAL MATERIALS REVIEWS (2015)
Effect of Cr content and heat-treatment on the high temperature strength of eutectic Al-Si alloys
Yuying Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Correlating Hardness Retention and Phase Transformations of Al and Mg Cast Alloys for Aerospace Applications
W. Kasprzak et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Characterization of Al-Fe-V-Si heat-resistant aluminum alloy components fabricated by selective laser melting
Shaobo Sun et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Dispersoid strengthening of a high temperature Al-Si-Cu-Mg alloy via Mo addition
A. R. Farkoosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of solidification rate and loading mode on deformation behavior of cast Al-Si-Cu-Mg alloy with additions of transition metals
S. K. Shaha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The Al-Al3Ni Eutectic Reaction: Crystallography and Mechanism of Formation
Yangyang Fan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Improving High-Temperature Tensile and Low-Cycle Fatigue Behavior of Al-Si-Cu-Mg Alloys Through Micro-additions of Ti, V, and Zr
S. K. Shaha et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Hybrid nanostructured aluminum alloy with super-high strength
Zhi Wang et al.
NPG ASIA MATERIALS (2015)
Grain growth and stabilisation of nanostructured aluminium at high temperatures: review
H. Asgharzadeh et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Thermal analysis: basics, applications, and benefit
Michael Feist
CHEMTEXTS (2015)
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
Kaka Ma et al.
ACTA MATERIALIA (2014)
Controlling the ignition and flammability of magnesium for aerospace applications
Frank Czerwinski
CORROSION SCIENCE (2014)
In situ elevated temperature transmission electron microscopy of sensitized aluminum-magnesium alloy treated by ultrasonic impact treatment
Kim N. Tran et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Tensile and compressive deformation behavior of the Al-Si-Cu-Mg cast alloy with additions of Zr, V and Ti
S. K. Shaha et al.
MATERIALS & DESIGN (2014)
Perspective high strength aluminium alloys of new generation based on Al-Ni-Mn-Fe-Si-Zr system
A. Amenova et al.
MATERIALS RESEARCH INNOVATIONS (2014)
The Diffusion Coefficient of Scandium in Dilute Aluminum-Scandium Alloys
Marcel A. Kerkove et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Thermal stability of (AlSi)x(ZrVTi) intermetallic phases in the Al-Si-Cu-Mg cast alloy with additions of Ti, V, and Zr
S. K. Shaha et al.
THERMOCHIMICA ACTA (2014)
Effect of mechanical alloying and sintering process on microstructure and mechanical properties of Al-Ni-Y-Co-La alloy
Yan-bo Yuan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
EFFECT OF MAGNESIUM ADDITION ON PROPERTIES OF Al-BASED COMPOSITE REINFORCED WITH FINE NiO PARTICLES
M. Zygmunt-Kiper et al.
ARCHIVES OF METALLURGY AND MATERIALS (2014)
Thermal stability of Al-Cu-Mg alloys
Gaelle Pouget et al.
Aluminium Alloys 2014 - ICAA14 (2014)
Rapidly Solidified High-Temperature Aluminum Alloys. II. Mechanical Properties
A. V. Krainikov et al.
POWDER METALLURGY AND METAL CERAMICS (2013)
Effects of samarium addition on microstructure and mechanical properties of as-cast Al-Si-Cu alloy
Zhi Hu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Thermal stability of friction stir processed ultrafine grained Al-Mg-Sc alloy
N. Kumar et al.
MATERIALS CHARACTERIZATION (2012)
The Evolution of Al-Li Base Products for Aerospace and Space Applications
Roberto J. Rioja et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
A model of grain refinement and strengthening of Al alloys due to cold severe plastic deformation
Xiao Guang Qiao et al.
PHILOSOPHICAL MAGAZINE (2012)
Phase transformations in isochronally annealed mould-cast and cold-rolled Al-Sc-Zr-based alloy
M. Vlach et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Thermodynamic assessments of the Al-Th and Th-Zn systems
Z. S. Li et al.
JOURNAL OF NUCLEAR MATERIALS (2010)
Al-Ta (Aluminum-Tantalum)
H. Okamoto
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2010)
Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates
Marsha E. van Dalen et al.
ACTA MATERIALIA (2009)
First principles impurity diffusion coefficients
M. Mantina et al.
ACTA MATERIALIA (2009)
3d transition metal impurities in aluminum: A first-principles study
M. Mantina et al.
PHYSICAL REVIEW B (2009)
Impurity diffusion activation energies in Al from first principles
Darko Simonovic et al.
PHYSICAL REVIEW B (2009)
Al-Rich Portion of the Al-Hf Phase Diagram
L. L. Rokhlin et al.
RUSSIAN METALLURGY (2009)
Enhanced thermal stability of amorphous aluminum alloys through microalloying
T. W. Wilson et al.
MATERIALS LETTERS (2008)
Constitutive model for aluminum alloys exposed to fire conditions
J. Maljaars et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
First-principles calculation of self-diffusion coefficients
M. Mantina et al.
PHYSICAL REVIEW LETTERS (2008)
Alloy development for the enhanced stability of Ω precipitates in Al-Cu-Mg-Ag alloys
BM Gable et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Criteria for developing castable, creep-resistant aluminum-based alloys - A review
KE Knipling et al.
ZEITSCHRIFT FUR METALLKUNDE (2006)
The effects of prolonged thermal exposure on the mechanical properties and fracture toughness of C458 aluminum-lithium alloy
D Ortiz et al.
ENGINEERING FAILURE ANALYSIS (2006)
Coarsening kinetics of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy
EA Marquis et al.
ACTA MATERIALIA (2005)
Scandium in aluminium alloys
J Royset et al.
INTERNATIONAL MATERIALS REVIEWS (2005)
Eutectic modification of Al-Si alloys with rare earth metals
K Nogita et al.
MATERIALS TRANSACTIONS (2004)
Coarsening of Al3Sc precipitates in an Al-0.28 Wt pct Sc alloy
C Watanabe et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation
Y Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Creep resistant aluminium alloys and their applications
JS Robinson et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Some problems of the use of aluminum-lithium alloys
VV Zakharov
METAL SCIENCE AND HEAT TREATMENT (2003)
Microstructural characterization and microhardness of rapidly solidified Al-Ce alloys
ZG Zhang et al.
ZEITSCHRIFT FUR METALLKUNDE (2002)
A random walk approach to Ostwald ripening
M Schwind et al.
ACTA MATERIALIA (2001)
Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys
EA Marquis et al.
ACTA MATERIALIA (2001)
High-temperature oxidation of Al-Mg alloys
JAS Tenório et al.
OXIDATION OF METALS (2000)
Share Paper
