Related references
Note: Only part of the references are listed.Enhancement of surface reflectivity of fused deposition modeling parts by post-processing
Yu-Fan Chen et al.
OPTICS COMMUNICATIONS (2019)
Minimizing warpage of ABS prototypes built with low-cost fused deposition modeling machine using developed closed-chamber and optimal process parameters
Chil-Chyuan Kuo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Five-axis additive manufacturing of freeform models through buildup of transition layers
Mohammed A. Isa et al.
JOURNAL OF MANUFACTURING SYSTEMS (2019)
A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics
Arup Dey et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Additive manufacturing technology and its implementation in construction as an eco-innovative solution
Seyed Hamidreza Ghaffar et al.
AUTOMATION IN CONSTRUCTION (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Polishing of fused deposition modeling products by hot air jet: Evaluation of surface roughness
Mohamed Adel et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Additive manufacturing of biomaterials
Susmita Bose et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Warpage of FDM parts: Experimental tests and analytic model
Antonio Armillotta et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2018)
Machining of Fibre Reinforced Plastic Composite Materials
Alessandra Caggiano
MATERIALS (2018)
Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters
Mercedes Perez et al.
MATERIALS (2018)
Developing thixo-extrusion process for additive manufacturing of metals in semi-solid state
Amin Jabbari et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
A Review of 3D Printing Technology for Medical Applications
Qian Yan et al.
ENGINEERING (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Dual-objective Analysis for Desktop FDM Printers: Energy Consumption and Surface Roughness
Tao Peng et al.
25TH CIRP LIFE CYCLE ENGINEERING (LCE) CONFERENCE (2018)
Investigation of Dimensional Accuracy and Material Performance in Fused Deposition Modeling
Dharipalli Hyndhavi et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Additive manufacturing of non-assembly mechanisms
Juan Sebastian Cuellar et al.
ADDITIVE MANUFACTURING (2018)
Performance evaluation of warping characteristic of fused deposition modelling process
Biranchi N. Panda et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Overview on Additive Manufacturing Technologies
Flaviana Calignano et al.
PROCEEDINGS OF THE IEEE (2017)
Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
Jasgurpreet Singh Chohan et al.
RAPID PROTOTYPING JOURNAL (2017)
Laser assisted finishing process for improved surface finish of fused deposition modelled parts
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Anti-aliasing for fused filament deposition
Hai-Chuan Song et al.
COMPUTER-AIDED DESIGN (2017)
Modeling of additive manufacturing processes for metals: Challenges and opportunities
M. M. Francois et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
G. D. Goh et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2017)
Materials for additive manufacturing
David Bourell et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Additive manufacturing and post-processing simulation: laser cladding followed by high speed machining
Konstantinos Salonitis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A Study of Build Edge Profile for Prediction of Surface Roughness in Fused Deposition Modeling
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting
O. M. F. Marwah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Finishing of Fused Deposition Modeling parts by CNC machining
Alberto Boschetto et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
CNC-assisted selective melting for improved surface finish of FDM parts
Mohammad Taufik et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Additive Manufacturing and High Speed Machining -Cost comparison of short lead time manufacturing methods
Sebastian Hallgren et al.
26TH CIRP DESIGN CONFERENCE (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Relationships between surface free energy, surface texture parameters and controlled drug release in hydrophilic matrices
J. Sauri et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment
Jeremy Faludi et al.
RAPID PROTOTYPING JOURNAL (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin et al.
MATERIALS & DESIGN (2015)
Machining of carbon fiber reinforced plastics: Influence of tool geometry and fiber orientation on the machining forces
M. Henerichs et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2015)
Accuracy prediction in fused deposition modeling
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Energy-efficient machining systems: a critical review
Tao Peng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Experimental investigation of FDM process for improvement of mechanical properties and production cost
Ismail Durgun et al.
RAPID PROTOTYPING JOURNAL (2014)
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
Eric J. McCullough et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility
Jae-Won Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Optimization of cutting conditions for surface roughness in CNC end milling
Kantheti Venkata Murali Krishnam Raju et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Optimal cutting condition determination for desired surface roughness in end milling
Chakguy Prakasvudhisarn et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Representation of surface roughness in fused deposition modeling
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Surface roughness prediction model for CNC machining of polypropylene
V. G. Dhokia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis
Y. Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
T Özel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)
Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm
PM Pandey et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2004)
Optimum part deposition orientation in fused deposition modeling
K Thrimurthulu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Predicting surface roughness in machining: a review
PG Benardos et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Improvement of surface finish by staircase machining in fused deposition modeling
PM Pandey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)
Share Paper
