Related references
Note: Only part of the references are listed.Prospects and strategies for magnesium alloys as biodegradable implants from crystalline to bulk metallic glasses and composites-A review
Faisal Kiani et al.
ACTA BIOMATERIALIA (2020)
Highly Porous Titanium Acetabular Components in Primary and Revision Total Hip Arthroplasty: A Systematic Review
Michael-Alexander Malahias et al.
JOURNAL OF ARTHROPLASTY (2020)
Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution
N. E. Putra et al.
ACTA BIOMATERIALIA (2020)
Effect of spark plasma sintering temperature on the pore characteristics, porosity and compression strength of porous titanium foams
Isaac M. Makena et al.
SN APPLIED SCIENCES (2020)
Production and Digital Image Correlation Analysis of Titanium Foams with Different Pore Morphologies as a Bone-Substitute Material
Mohammed Shbeh et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)
Development, Characterization and In Vitro Biological Properties of Scaffolds Fabricated From Calcium Phosphate Nanoparticles
Lizette Morejon et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management
Gabriel Fernandez de Grado et al.
JOURNAL OF TISSUE ENGINEERING (2018)
The influence of laser parameters, scanning strategies and material on the fatigue strength of a stochastic porous structure
Shaaz Ghouse et al.
ADDITIVE MANUFACTURING (2018)
Effect of laser processing parameters on mechanical properties of porous tantalum fabricated by laser multi-layer micro-cladding
Changjun Chen et al.
RAPID PROTOTYPING JOURNAL (2017)
Dual properties of zirconia coated porous titanium for a stiffness enhanced bio-scaffold
Han Lee et al.
MATERIALS & DESIGN (2017)
Metabolite signatures of doxorubicin induced toxicity in human induced pluripotent stem cell-derived cardiomyocytes
Umesh Chaudhari et al.
AMINO ACIDS (2017)
Hydrothermal Fabrication of Highly Porous Titanium Bio-Scaffold with a Load-Bearable Property
Han Lee et al.
MATERIALS (2017)
Metallic Biomaterials: Current Challenges and Opportunities
Karthika Prasad et al.
MATERIALS (2017)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Bone mechanical properties and changes with osteoporosis
Georg Osterhoff et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)
Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy
B. Rahmati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
Naoya Taniguchi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects
Guoyuan Li et al.
SCIENTIFIC REPORTS (2016)
Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration
Guifang Wang et al.
SCIENTIFIC REPORTS (2016)
Design, processing and characterization of titanium with radial graded porosity for bone implants
Y. Torres et al.
MATERIALS & DESIGN (2016)
Additively manufactured porous tantalum implants
Ruben Wauthle et al.
ACTA BIOMATERIALIA (2015)
PHYSICAL AND MECHANICAL CHARACTERIZATION OF A POROUS CEMENT FOR METAPHYSEAL BONE REPAIR
Bruno Cimatti et al.
ACTA ORTOPEDICA BRASILEIRA (2015)
Metallic implant biomaterials
Qizhi Chen et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)
Bone defect animal models for testing efficacy of bone substitute biomaterials
Ye Li et al.
JOURNAL OF ORTHOPAEDIC TRANSLATION (2015)
Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
M. Yan et al.
POWDER METALLURGY (2014)
Porous titanium granules in critical size defects of rabbit tibia with or without membranes
Rafael Arcesio Delgado-Ruiz et al.
INTERNATIONAL JOURNAL OF ORAL SCIENCE (2014)
Functionally heterogeneous porous scaffold design for tissue engineering
A. K. M. Bashirul Khoda et al.
COMPUTER-AIDED DESIGN (2013)
Graded conducting titanium-iridium oxide coatings for bioelectrodes in neural systems
A. M. Cruz et al.
THIN SOLID FILMS (2013)
Mg-Zr-Sr alloys as biodegradable implant materials
Yuncang Li et al.
ACTA BIOMATERIALIA (2012)
Bone remodelling in osteoarthritis
David B. Burr et al.
NATURE REVIEWS RHEUMATOLOGY (2012)
Heterogeneous minimal surface porous scaffold design using the distance field and radial basis functions
Dongjin Yoo
MEDICAL ENGINEERING & PHYSICS (2012)
Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency
Jorge M. Sobral et al.
ACTA BIOMATERIALIA (2011)
A comparative study of titanium nitride (TiN), titanium oxy nitride (TiON) and titanium aluminum nitride (TiAlN), as surface coatings for bio implants
B. Subramanian et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Biomechanics in bone tissue engineering
Dominique P. Pioletti
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2010)
Selective Laser Melting: A Regular Unit Cell Approach for the Manufacture of Porous, Titanium, Bone In-Growth Constructs, Suitable for Orthopedic Applications
Lewis Mullen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Garrett E. Ryan et al.
BIOMATERIALS (2008)
Influence of substratum surface chemistry/energy and topography on the human fetal osteoblastic cell line hFOB 1.19:: Phenotypic and genotypic responses observed in vitro
Xiaomei Liu et al.
BIOMATERIALS (2007)
Titanium oxide films produced on commercially pure titanium by anodic oxidation with different voltages
Neide K. Kuromoto et al.
MATERIALS CHARACTERIZATION (2007)
Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: Three-dimensional micro-CT based structural analyses of porous bioactive titanium implants
Bungo Otsuki et al.
BIOMATERIALS (2006)
Magnesium and its alloys as orthopedic biomaterials: A review
MP Staiger et al.
BIOMATERIALS (2006)
An application of nanoindentation technique to measure bone tissue lamellae properties
CE Hoffler et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Mechanical properties and osteoconductivity of porous bioactive titanium
M Takemoto et al.
BIOMATERIALS (2005)
Mg-based bulk metallic glass composites with plasticity and gigapascal strength
YK Xu et al.
ACTA MATERIALIA (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Systematic variation in osteoblast adhesion and phenotype with substratum surface characteristics
JY Lim et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Processing of titanium foams
DC Dunand
ADVANCED ENGINEERING MATERIALS (2004)
Diamond-like carbon coatings as biocompatible materials - an overview
A Grill
DIAMOND AND RELATED MATERIALS (2003)
Further characterization of human fetal osteoblastic hFOB 1.19 and hFOB/ER alpha cells: bone formation in vivo and karyotype analysis using multicolor fluorescent in situ hybridization
M Subramaniam et al.
JOURNAL OF CELLULAR BIOCHEMISTRY (2002)
Age-related bone loss: Old bone, new facts
GK Chan et al.
GERONTOLOGY (2002)
Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits
AI Itälä et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2001)
Shear strength and fatigue properties of human cortical bone determined from pure shear tests
CH Turner et al.
CALCIFIED TISSUE INTERNATIONAL (2001)